 |
 Rear Axle U-Bolts(Click Here for More Information or to Order)
Used and New Rear Axle U-Bolts for the 1967 - 1973 Mercury Cougar.
|
|
|
 Bushings & Shackles(Click Here for More Information or to Order)
New and Used Rear Bushings and Shackles for the 1967 - 1973 Mercury Cougar
|
|
|
 Driveline / Driveshaft(Click Here for More Information or to Order)
You will notice that on some rare applications there is very little difference in length with some of the more common applications. Often you can substitute one for another to save money and if your ride height has been lowered a slightly shorter shaft may actually prove to be a better fit that the factory sized shaft.
|
|
|
 Factory Rear Sway Bars(Click Here for More Information or to Order)
|
|
|
 Rear Axle Shock Mounting Plates(Click Here for More Information or to Order)
|
|
|
| Wedge - Rear Axle Adjusting (Click Here for More Information or to Order)
|
|
|
 1967 -1973 Mercury Cougar / Ford Mustang Limited Slip 8 Inch and 9 Inch Center Sections - Rebuilt(Click Here for More Information or to Order)
Our Ford third member specialist has over 30 years of experience setting up ring and pinion gears and rebuilding for stock and high performance applications.
|
|
|
 1967 - 1973 Mercury Cougar (not Mustang) Leaf Springs - Repro(Click Here for More Information or to Order) Part #: leafspring
Price:$259.85 
Factory replacement leaf springs for the 1967 - 1973 Mercury Cougar. THESE ARE NOT MUSTANG LEAF SPRINGS. All springs include front eye bushings.
|
|
|
| 1967 - 1970 Mercury Cougar / Ford Mustang Axle Right Hand / Passenger Side - Used (Click Here for More Information or to Order) Part #: C9OZ-4234-A
Price:$95.00 
Right side axle, 28 spline 31–1/8 inch length. For both 8 inch and 9 inch rear ends. Ships with used bearing, bearing retainer plate, and 5 pressed in wheel studs.
*Note Boss 302 and 428 CJ equipped Cougars came with heavy duty 31 splined axles.
|
|
|
| 1967 - 1970 Mercury Cougar / Ford Mustang Axle Left Hand / Driver Side - Used (Click Here for More Information or to Order) Part #: C9OZ-4234-B
Price:$79.00 
Left side axle, 28 spline 27–1/16 inch length. For both 8 inch and 9 inch rear ends. Ships with used bearing, bearing retainer plate, and 5 pressed in wheel studs.
*Note Boss 302 and 428 CJ equipped Cougars came with heavy duty 31 splined axles.
|
|
|
| 1967-1968 Mercury Cougar / Ford Mustang 8 Inch Third Member -Used (Click Here for More Information or to Order) Part #: D0OZ-4204-8A300
Price:$165.00 
Also called a pumpkin, 3.00:1 open ratio.
Check your door tag under “Axle”.
1967 code 1
1968 code 5
|
|
|
| 1967-1968 Mercury Cougar / Ford Mustang 8 Inch Third Member -Used (Click Here for More Information or to Order) Part #: D0OZ-4204-8A279
Price:$175.00 
Also called a pumpkin, 2.79:1 open ratio.
Check your door tag under “Axle”.
1967 code 0 (zero)
1968 code 2
|
|
|
| 1967-1968 Mercury Cougar / Ford Mustang 8 Inch Rear End Housing Complete - Used (Click Here for More Information or to Order) Part #: C7ZZ-4010-Assy
Price:$195.00 
Complete rear end housing - drum to drum, with axles, and with...
|
|
|
| 1967 - 1968 Mercury Cougar / Ford Mustang 8 Inch Rear End Housing - Used (Click Here for More Information or to Order) Part #: C7ZZ-4010-E
Price:$135.00 
Bare housing with proper axle pad spacing for all 1967-1968 Cougars with 289 or 302 engines. Over-sized shipping length.
|
|
|
| 1970 Mercury Cougar / Ford Mustang 9 Inch Rear End Housing Complete - Used (Click Here for More Information or to Order) Part #: D0ZZ-4010-Assy
Price:$490.00 
1970 9 Inch Rear End Housing Complete – Used
Complete rear end housing - drum to drum, with...
|
|
|
| 1970 Mercury Cougar / Ford Mustang 9 Inch Rear End Housing - Used (Click Here for More Information or to Order) Part #: D0ZZ-4010-C
Price:$495.00 
Bare housing with proper axle pad spacing, vent location, and brake line attaching. For all 1970 Cougars. Over-sized shipping length.
|
|
|
| 1971 - 1973 Mercury Cougar / Ford Mustang 9 Inch Rear Axle Housing - Used (Click Here for More Information or to Order) Part #: D1ZZ-4010-B
Price:$175.00 
Bare housing with proper axle pad spacing for all 1971-1973 Cougars. Over-sized shipping length.
|
|
|
| 1971 - 1973 Mercury Cougar / Ford Mustang Axle Right Hand Side - Used (Click Here for More Information or to Order) Part #: D0OZ-4234-C
Price:$95.00 
Right side axle, 28 spline 31–7/8 inch length. Ships with used bearing, bearing retainer plate, and 5 pressed in wheel studs.
|
|
|
| 1971 - 1973 Mercury Cougar / Ford Mustang Axle Left Hand Side - Used (Click Here for More Information or to Order) Part #: D0OZ-4234-D
Price:$85.00 
Left side axle, 28 spline 27–13/16 inch length. Ships with used bearing, bearing retainer plate, and 5 pressed in wheel studs.
|
|
|
 1967 - 1968 Mercury Cougar / Ford Mustang Ford 9 Inch Rear Axle Rubber Snubber - Used(Click Here for More Information or to Order) Part #: C3AZ-4730-B
Price:$66.85 
Rubber bumper that mounts to the metal axle snubber on Ford nine inch rear ends on...
|
|
|
 1969 - 1970 Mercury Cougar / Ford Mustang Ford 9 Inch Rear Axle Rubber Snubber - Used(Click Here for More Information or to Order) Part #: C9OA-4906-A
Price:$36.85 
The 69-70 looks the same as the earlier version once installed but the casting number will read C3AA-4906-C on the early unit and C9OA-4906-A.
|
|
|
 1967 Mercury Cougar / Ford Mustang 9 Inch Rear Axle Snubber Bracket - Used(Click Here for More Information or to Order) Part #: C5ZZ-4298-A
Price:$76.85 
Bracket mounts to 9 inch third member.
|
|
|
 1968 - 1970 Mercury Cougar / Ford Mustang 9 Inch Rear Axle Snubber Bracket - Used(Click Here for More Information or to Order) Part #: 68snubbracket
Price:$46.85 
Will work on 1967 9" differential but has slightly different angles as seen by our pictures.
|
|
|
 1967 - 1973 Mercury Cougar / Ford Mustang Differential Body Plate - Used(Click Here for More Information or to Order) Part #: difplate
Price:$42.75 
Since we always claim to have parts nobody else does... This welds to the bottom side of the car just above...
|
|
|
| 1968 - 1973 Mercury Cougar / Ford Mustang 9 Inch Third Member - Used (Click Here for More Information or to Order) Part #: D0OZ-4204-9A275
Price:$185.00 
Also called a pumpkin, 2.75:1 open ratio.
Check your door tag under “Axle”.
1968 code 1
1969-73 code 2
|
|
|
| 1967 - 1973 Mercury Cougar / Ford Mustang Rear Body Rubber Bumper - Used (Click Here for More Information or to Order) Part #: C6AZ-4730-A
Price:$2.00 
Mounts over rear axle ends into the body/frame.
|
|
|
| 1968 - 1973 Mercury Cougar / Ford Mustang 9 Inch Third Member - Used (Click Here for More Information or to Order) Part #: D0OZ-4204-9A300
Price:$185.00 
D0OZ-4204-9A300
1968–1973 9 Inch Third Member – Used
Also called a pumpkin, 3.00:1 open ratio. These 3rd members will have the fill plug.
Check your door tag under “Axle”.
|
|
|
| 1967 - 1973 Mercury Cougar / Ford Mustang U-Joint attaching bolts - Used (Click Here for More Information or to Order) Part #: D3AZ-4529-A
Price:$11.85 
All applications, attaches the drive shaft U-Joint to rear end pinion yoke. Sold in pairs, complete with nuts. Perfect used.
|
|
|
| 1968 - 1973 Mercury Cougar / Ford Mustang 9 Inch Third Member - Used (Click Here for More Information or to Order) Part #: D0OZ-4204-9A300
Price:$185.00
D0OZ-4204-9A300
1968–1973 9 Inch Third Member – Used
Also called a pumpkin, 3.00:1 open ratio. These 3rd members will have the fill plug.
Check your door tag under “Axle”.
|
|
|
| 1967 Mercury Cougar / Ford Mustang 9 Inch Rear End Housing Complete–Used (Click Here for More Information or to Order) Part #: C7ZZ-4010-9ASSY
Price:$565.00 
Complete rear end housing - drum to drum, with axles, and with pumpkin. 1967 9 inch rear end housings had the carry over fill plug in the steel housing as seen from...
|
|
|
| 1967 Mercury Cougar / Ford Mustang 9 Inch Rear Axle Housing - Used (Click Here for More Information or to Order) Part #: C7ZZ-4010-C
Price:$495.00 
Bare housing with proper axle pad spacing, vent location, brake line attaching, and rear fill plug. Correct for all 1967 big block Cougars. Over-sized shipping length.
|
|
|
| 1968 Mercury Cougar / Ford Mustang 9 Inch Rear Axle Housing - Used (Click Here for More Information or to Order) Part #: C8ZZ-4010-C
Price:$515.00 
Bare housing with proper axle pad spacing, vent location, and brake line attaching. For all 1968 big block Cougars. Over-sized shipping length.
|
|
|
| 1969 Mercury Cougar / Ford Mustang Rear Axle Housing - Used (Click Here for More Information or to Order) Part #: C9ZZ-4010-C
Price:$495.00 
Bare housing with proper axle pad spacing, vent location, and brake line attaching. For all 1969 Cougars. Over-sized shipping length.
|
|
|
| 1968 Mercury Cougar / Ford Mustang 9 Inch Rear End - Complete – Used (Click Here for More Information or to Order) Part #: C8ZZ-4010-9ASSY
Price:$575.00 
Complete rear end housing - drum to drum, with axles, and with pumpkin. First year for the oil fill plug in the cast third member. Also has little differences in the...
|
|
|
| 1969 Mercury Cougar / Ford Mustang 9 Inch Rear End Housing Complete – Used (Click Here for More Information or to Order) Part #: C9ZZ-4010-9ASSY
Price:$495.00 
Complete rear end housing - drum to drum, with axles, and with pumpkin. As removed from...
|
|
|
| 1971 - 1973 Mercury Cougar / Ford Mustang 9 Inch Rear End Housing Complete – Used (Click Here for More Information or to Order) Part #: D1ZZ-4010-9ASSY
Price:$265.00 
Complete rear end housing - drum to drum, with axles, and with pumpkin. As removed from West Coast...
|
|
|
| 1967 Mercury Cougar / Ford Mustang 9 Inch Third Member – Used (Click Here for More Information or to Order) Part #: C7OZ-4204-9A300
Price:$225.00 
Also called a pumpkin, 3.00:1 open ratio. 1967 9 inch third members did not originally come with fill plugs. The back of the housing...
|
|
|
| 1971 - 1973 Mercury Cougar / Ford Mustang 9 Inch Rear Axle Rubber Snubber - Used (Click Here for More Information or to Order) Part #: D1ZZ-4730-A
Price:$35.00 
D1ZZ-4730-A Rubber bumper that mounts to the metal axle snubber on Ford nine inch rear ends on 1971 - 1973 Mercury Cougar and Ford Mustangs. Good used part with solidly mounted metal threaded stud. Pinion bumper.
|
|
|
 1967 - 1973 Mercury Cougar / Ford Mustang Differential Carrier Washer EACH - Repro(Click Here for More Information or to Order) Part #: F2J03
Price:$0.30 
#373820-S Copper washer for attaching the 8 inch or 9 inch third members to the axle housings. Steel washers will leak, made from copper which is a soft metal...
|
|
|
 1967 - 1973 Mercury Cougar / Ford Mustang REAR GR-2 KYB Shock - Repro(Click Here for More Information or to Order) Part #: i7b6
Price:$29.85 
This gas shock improves handling without sacrificing ride comfort. A very good choice for the daily driver wanting a smooth ride with the response of a gas shock.
|
|
|
 1967 - 1973 Mercury Cougar / Ford Mustang Rear Gas-A-Just KYB Shock - Repro(Click Here for More Information or to Order) Part #: i8b10
Price:$49.85 
This shock is the perfect choice for the performance oriented.
|
|
|
| 1967 - 1973 Mercury Cougar / Ford Mustang 1 Inch Lowering Block - Repro (Click Here for More Information or to Order) Part #: i9c1
Price:$24.85 
This block goes between the spring perches and the leaf springs to lower the height of the rear of your car by 1 inch . . .
|
|
|
| 1967 - 1973 Mercury Cougar / Ford Mustang 2 Inch Lowering Block - Repro (Click Here for More Information or to Order) Part #: i9c3
Price:$24.85 
This block goes between the spring perches and the leaf springs to lower the height of the rear of your car by 2 inches . . .
|
|
|
 1967 - 1973 Mercury Cougar / Ford Mustang 1 Inch Rear End Lowering Kit - Repro(Click Here for More Information or to Order) Part #: i9c2
Price:$44.85 
The Kit includes 2 lowering blocks, 4 u-bolts, 8 nuts and instructions . . .
|
|
|
| 1967 - 1973 Mercury Cougar / Ford Mustang 2 Inch Rear End Lowering Kit - Repro (Click Here for More Information or to Order) Part #: 2inLowerKit
Price:$64.85 
The Kit includes 2 lowering blocks, 4 u-bolts and 8 nuts . . .
|
|
|
 1967 - 1973 Mercury Cougar / Ford Mustang Leaf Spring Anti-Squeak Pads - Repro(Click Here for More Information or to Order) Part #: f4f8
Price:$1.85 
Replaces Ford Part # C0AA-5586
|
|
|
 1967-1973 Mercury Cougar / Ford Mustang 'Scott Drake' High Performance REAR Shock Absorbers - Repro(Click Here for More Information or to Order) Part #: f5h11
Price:$39.85 
|
|
|
 1967 - 1973 Mercury Cougar / Ford Mustang Stabilizer End Link Bushing EACH - Repro(Click Here for More Information or to Order) Part #: F2H51
Price:$1.00 
This is the bushing that Ford lists as the REAR stabilizer end link bushing, but it works for both front and rear.
|
|
|
 1967 - 1973 Mercury Cougar / Ford Mustang Stabilizer End Link Bushings (SET OF 4) - New(Click Here for More Information or to Order) Part #: D2G16
Price:$3.85 
This is the bushing that Ford lists as the REAR stabilizer end link bushing, but it works for both front and rear.
|
|
