Home > 1972 Mercury Cougar
All Available Parts - 1972 Mercury Cougar
Products (Click sub-categories above to ONLY display results for that Sub-Category) 201-300 of 3477
Sorted By:
Availability:
Display Options:
Availability: Used / Wrecking Yard Item
Item #: 15-0146 -
Used Release Spring for the 1967 - 1973 Mercury Cougar / 1967 - 1973 Ford Mustang
Availability: Used / Wrecking Yard Item
Item #: 15-0145 -
Used Spring Sleeve Cap for the 1967 - 1973 Mercury Cougar / 1967 - 1973 Ford Mustang
Availability: Used / Wrecking Yard Item
Item #: 15-0190 -
Used lower steering column shaft for 70 - 73 Cougars and Mustangs with a fixed column. Identified by length, and the round style lower flange. 1968-69 lower flange is slightly smaller with flat sides. Overall length is 16-3/8 inches.
Availability: In-Stock Item
Item #: 15-0173 -
Used return spring for any 1970 - 1978 Cougar or Mustang Tilt Column. This spring provides return tension on tilt steering wheels.*NOTE* For tilt column service, you can contact Tony Augustine at 6t8cougarguy@gmail.com. Tony is a trusted colleague of WCCC and we've sent many customers his way since our column specialist retired last year.
Availability: In-Stock Item
Item #: 15-0203 -
This extension holds the inner spring tube in place on the 70 - 73 column.Ford part number: D0AA-3790-CW
Availability: In-Stock Item
Item #: 15-0178 -
Used snap ring that is used to hold the bearing on you the steering shaft. This ring was used on 67 - 78 fixed columns and 70 - 78 tilt columns. Not for use on 67 - 69 tilt columns.*NOTE* For tilt column service, you can contact Tony Augustine at 6t8cougarguy@gmail.com. Tony is a trusted colleague of WCCC and we've sent many customers his way since our column specialist retired last year. ...
Availability: In-Stock Item
Item #: 15-0179 -
Used retainer / friction clip that replaces broken injected plastic shaft retainers on fixed or tilt steering collapsible columns on most FoMoCo products starting in 1968 and through the 70's. Ford part number C9AZ-3E629-B. *NOTE* For tilt column service, you can contact Tony Augustine at 6t8cougarguy@gmail.com. Tony is a trusted colleague of WCCC and we've sent many customers his way since our column specialist retired last year. ...
Availability: In-Stock Item
Item #: 31804 -
This clip goes on the upper end of your column and keeps your steering shaft from moving around when you pull up on your steering wheel.
Spotlight!
Featured!
Availability: In-Stock Item
Item #: 32067 -
Reproduction 3D printed retainer / friction clip that replaces broken injected plastic shaft retainers on fixed or tilt steering collapsible columns on most FoMoCo products starting in 1968 and through the 70's. These installs on the upper piece of what Ford called the Steering Column Shaft Assembly, also known as the inner steering column collapsible shaft. The Steering Column Shaft Assembly is the 2 piece shaft that connects the steering wheel to the rag joint. The upper...
Availability: Used / Wrecking Yard Item
Item #: 32204 -
Used lower steering column shaft for 71 - 72 Cougars and Mustangs with a tilt column. *NOTE* For tilt column service, you can contact Tony Augustine at 6t8cougarguy@gmail.com. Tony is a trusted colleague of WCCC and we've sent many customers his way since our column specialist retired last year.
Availability: In-Stock Item
Item #: 32897 -
Used sleeve for fixed steering wheel. Special molded rubber sleeve that holds the bearing in place. Ford part # D1AZ-3518 or E2AZ-3518
Availability: Used / Wrecking Yard Item
Item #: 33445 -
Used lateral or side bracket for mounting the steering column to the instrument panel on any 1972-73 Mercury Cougar or Ford Mustang. Hooped support bracket only, there is also a large main bracket that is also needed. Tilt and fixed steering columns. Bracket also used on 1971 full sized Ford and Mercury cars. Ford part number D1AZ-3B139-A.
Availability: Used / Wrecking Yard Item
Item #: 33446 -
Used bracket for mounting the steering column to the instrument panel on any 1972-73 Mercury Cougar or Ford Mustang. Main bracket only, there is also a hooped support bracket that is also needed. Tilt and fixed steering columns. Bracket also used on 1971 full sized Ford and Mercury cars. Ford part number D1AZ-3676-A.
Availability: Used / Wrecking Yard Item
Item #: 33447 -
Used wiring harness retainer bracket for mounting the steering column bracket, on any 1973 Mercury Cougar or Ford Mustang. Retainer only, many of these are missing. Probably not missed, limited to stock on hand. Basic Ford part number 14A163.
Availability: Used / Wrecking Yard Item
Item #: 33450 -
Used flat headed stove bolt and nut, for attaching the two steering column mounting brackets together. Brackets for mounting the steering column to the instrument panel on any 1972-73 Mercury Cougar or Ford Mustang. Two needed per installation, sold individually. This is a 3/8-16 square neck bolt and nut. Ford part number 384527-S2.
Availability: Used / Wrecking Yard Item
Item #: 33452 -
Used lower steering column mounting bracket at firewall, for any 1971-73 Mercury Cougar or Ford Mustang. Rubber seal will need to be replaced, see related items for rubber seal. Ford part number D1ZZ-65017A50-A.
Availability: Used / Wrecking Yard Item
Item #: 15-0028 -
Correct nut that is designed not to come undone.
Availability: Ships Direct from Supplier (Except International)
Item #: 30363 -
Reproduction Chrome / Black Leather steering wheel for your 68 - 73 Mercury Cougar. This kit includes: Steering wheel, hub, horn button and center decal. Hardware included.
Availability: In-Stock Item
Item #: 30365 -
Reproduction Chrome / Woodgrain steering wheel for your 68 - 73 Mercury Cougar. This kit includes: Steering wheel, hub, horn button and center decal. Hardware included.
Availability: In-Stock Item
Item #: 30663 -
Availability: Ships Direct from Supplier (Except International)
Item #: 30876 -
Reproduction Chrome / Dark Mahogany Woodgrain steering wheel for your 68 - 73 Mercury Cougar. This kit includes: Steering wheel, hub, horn button and center decal. Hardware included.
Availability: Ships Direct from Supplier (Except International)
Item #: 32643 -
Reproduction Black Steel / Black Leather steering wheel for your 68 - 73 Mercury Cougar. This kit includes: Steering wheel, hub, horn button and center decal. Hardware included.
Availability: Ships Direct from Supplier (Except International)
Item #: 32645 -
Reproduction thick grip Mahogany Woodgrain / Chrome steering wheel for your 68 - 73 Mercury Cougar. This kit includes: Steering wheel, hub, horn button and center decal. Hardware included.
Availability: Ships Direct from Supplier (Except International)
Item #: 32649 -
Reproduction Chrome / Black Leather 4 spoke steering wheel for your 68 - 73 Mercury Cougar. This kit includes: Steering wheel, hub, horn button and center decal. Hardware included.
Availability: Ships Direct from Supplier (Except International)
Item #: 11992 -
Reproduction reinforcement plate designed to weld onto the lower control arms. Sold individually, we are not sure that you would want to even buy one of these. They don't fit very well, and are not contoured to any lower control arm on the market. You will be bending these to fit, prior to welding. *Note - This is a non-returnable item.
Availability: Used / Wrecking Yard Item
Item #: 25508 -
D2OZ-7976-A Aluminum bell housing, sometimes called a converter housing in the Ford shop manual. 1972 - 1973 Mercury Cougar and Ford Mustang with 351 engine and automatic FMX transmission, code X on your door data plate tag. Ford master part number D2OZ-7976-A.
Availability: Used / Wrecking Yard Item
Item #: 16-0017 -
Used FMX transmission tail shaft or housing extension as Ford called them in the Master Parts Catalog. Fits all 1969-73 Mercury Cougar and Ford Mustang cars with transmission code X on the door tag. Cast aluminum construction. D2ZP-7A040-A version also available, we have a good supply of the updated 1972 version. The overall length of this housing is 12 7/8", which was also used on 1969 Fairlanes and Torinos. This housing will not fit full sized Ford Mercury cars that have an FMX,...
Availability: In-Stock Item
Item #: 33159 -
Replacement seal with boot for all 1965-73 C4 Ford transmissions. Tail shaft and slip yoke seal.
Availability: In-Stock Item
Item #: 33162 -
Replacement tail shaft bushing, for all 1969-73 FMX and 1967-73 C6 transmissions.
Availability: In-Stock Item
Item #: 33188 -
Shift kit for the C6 transmission valve body for all 1967-73 and 1967-73 Mercury and Ford. This is a standard shift rebuilding kit for your stock valve body.
Availability: In-Stock Item
Item #: 33190 -
Shift kit for the FMX transmission valve body for all 1969-72 and 1969-72 Mercury and Ford. This is a standard shift rebuilding kit for your stock valve body.* Note - 1973 has a different shift kit, see related items.
Availability: In-Stock Item
Item #: 33182 -
Filter / screen for the C6 transmissions, for all 1967-73 and 1967-73 Mercury and Ford.
Availability: In-Stock Item
Item #: 33179 -
Replacement cork pan gasket for all 1965-73 C4 Ford transmissions.
Availability: In-Stock Item
Item #: 33178 -
Cork pan gasket for the C6 transmission on any 1967-73 and 1967-73 Mercury and Ford. Rubber gasket also available.
Availability: In-Stock Item
Item #: 33177 -
Rubber pan gasket for the C6 transmission on any 1967-73 and 1967-73 Mercury and Ford. Cork gasket also available.
Availability: In-Stock Item
Item #: 33175 -
Rubber pan gasket for the FMX transmission on any 1969-73 and 1969-73 Mercury Cougar and Ford Mustang.
Availability: Out of Stock
Item #: 33172 -
Basic C6 transmission rebuild kit. Kit includes gaskets, seals, bands, filter, modulator, everything as shown. Fits all Ford C6 transmissions for any 1967-73 Mercury Cougar or Ford Mustang with that U code C-6 transmission. Quality kit, same as supplied to professional shops. Big and small block C6's.
Availability: In-Stock Item
Item #: 33174 -
Replacement filter for FMX transmissions. Fits all Ford FMX transmissions for any 1969-73 Mercury Cougar or Ford Mustang with that X code FMX transmission.
Availability: In-Stock Item
Item #: 10865 -
Quality reproduction for all 1969-73 Mercury Cougar and Ford Mustang with FMX automatic transmissions. This FMX switch is correct for 1972 and 1973 but works fine on 1969, 1970 and 1971. The only difference is that the later models had one extra plug and wire that will not be utilized when used on a 1969-71. All but one plug will be utilized on the 1969-71 applications. This plug and wire is not needed and can either taped off or clipped. Replaces original Ford part numbers C9ZZ-2A247-C,...
Availability: In-Stock Item
Item #: 11388 -
This reproduction radiator / core support assembly includes the lower crossmember and is the very best one made! The outer width on the frame rails for the hardtops is 35-1/2 inches, a convertible has a width of 35-1/4 inches. A good body man should be able to make a hardtop core support fit a convertible, but know that it is different. We generally have 4-6 convertibles on the ground in the wrecking yard at any given time, so please call 503-463-1130 for your convertible needs.Replaces Ford #...
Availability: Ships Direct from Supplier (Except International)
Item #: 12155 -
Good quality reproduction front cross member for your 71 - 73 Cougar or Mustang. This is the frame / body piece that goes underneath your core support and receives the front ends of the strut rods. Sold as a stand alone part and does not come with strut rods or any strut rod hardware.Width: 34.75"Diagonal from outer bottom corner to outer top edge: 5"
Availability: In-Stock Item
Item #: 11325 -
Straight Monte Carlo Bar in a black finish for Mercury Cougar and Ford Mustang. The Monte Carlo Bar was originally developed by Carroll Shelby to help maintain proper wheel alignment under hard cornering. It will also help reduce the chances that your shock towers will develop stress cracks over time. Note: Not for A/C or Convertible applications. This product will not clear the distributor or A/C Compressor. Replaces Ford part # D1ZZ-16A052-A. "Times New Roman"">...
Availability: In-Stock Item
Item #: 12122 -
Good for all 71-73 Cougars and Mustangs. This extension extends from the passenger side rear fender apron to the top of the cowl.This rear fender apron extension is a great choice for your damaged, rusted or missing panel. Made from stamped steel, just like the original. The extension fits in place between the passenger side rear fender apron and the top of the cowl. It provides for a sturdy, stable mounting area for the far rear top fender bolt and the rear hood hinge bolts. ...
Availability: In-Stock Item
Item #: 12817 -
Good for all 71-73 Cougars and Mustangs. This extension extends from the driver side rear fender apron to the top of the cowl.This rear fender apron extension is a great choice for your damaged, rusted or missing panel. Made from stamped steel, just like the original. The extension fits in place between the passenger side rear fender apron and the top of the cowl. It provides for a sturdy, stable mounting area for the far rear top fender bolt and the rear hood hinge bolts. ...
Availability: Used / Wrecking Yard Item
Item #: 13369 -
Metal reinforcing plate welded to the center of the rear body, where the 9 inch third member may come into contact with the floor. Cut from one of our many parts cars. Likely originally had a Ford part number of 4731. Removed from a 1971-73 Mercury Cougar, we suspect that it will not be a direct fit for a Mustang.This part will come as shown, spot welds will need to be drilled and the plate welded to your chassis.
Availability: Used / Wrecking Yard Item
Item #: 33492 -
Used corner cut from a 1971-73 Mercury Cougar. This would be the passenger side where the quarter extension and bumper filler mount. Really it is two pieces spot welded together to the tail panel, quarter panel, and trunk drop off. These may have some pitting or minor rust in the trunk drop off area.
Availability: Used / Wrecking Yard Item
Item #: 33491 -
Used corner cut from a 1971-73 Mercury Cougar. This would be the driver side where the quarter extension and bumper filler mount. Really it is two pieces spot welded together to the tail panel, quarter panel, and trunk drop off. These may have some pitting or minor rust in the trunk drop off area.
Availability: In-Stock Item
Item #: 26554 -
Two-piece Stainless Rear Axle Brake Line Set 71, 72 & 73 Mercury Cougar and Ford Mustang with the 8" or 9" Rear Axle. The Rear Axle Brake Lines are mounted on the axle going to the left and right rear wheels. These will either connect to a caliper hose or thread directly into a wheel cylinder. All lines come Pre-Bent and flared with the correct threaded fittings which reduces your install time tremendously. These stainless-steel lines are T304 but are of a special softer blend to help...
Availability: In-Stock Item
Item #: 26555 -
Two-piece OE-Style steel Rear Axle Brake Line Set 71, 72 & 73 Mercury Cougar and Ford Mustang with the 8" or 9" Rear Axle. The Rear Axle Brake Lines are mounted on the axle going to the left and right rear wheels. These will either connect to a caliper hose or thread directly into a wheel cylinder. All lines come Pre-Bent and flared with the correct threaded fittings which reduces your install time tremendously. These mild steel lines are Galphan coated for added protection. ...
Availability: In-Stock Item
Item #: 14685 -
72 - 73 Mercury Cougar and Ford Mustang Front Drum Intermediate Brake Line made of OE-style steel. Intermediate Brake Lines are the lines running from the front of the car to the back feeding your rear brakes. These lines will run along your chassis all the way back to the rear brake drop hose. All lines come Pre-Bent and flared with the correct threaded fittings which reduces your install time tremendously. These mild steel lines are Galphan coated for added protection. ...
Availability: In-Stock Item
Item #: 14686 -
Availability: In-Stock Item
Item #: 14687 -
Availability: In-Stock Item
Item #: 14688 -
Availability: Used / Wrecking Yard Item
Item #: 20500 -
These courtesy lights are located on the very outer right and left under the dash. Sold individually, two required per car. These are inspected for damage, contacts cleaned, and include a working lamp.Replaces Ford part number D1ZB-13707-AB.Fits:1971 Mercury Cougar1972 Mercury Cougar1973 Mercury Cougar1971 Ford Mustang1972 Ford Mustang1973 Ford Mustang ...
Availability: Used / Wrecking Yard Item
Item #: 10818 -
Starting in 1972 the 'Fasten Seat Belt' warning light was relocated to the center of the dash for visibility of all occupants of the vehicle. This is a tested, and working seatbelt warning light fits into the steel holder on the instrument clusters of all 1972-73 Mercury Cougar and Ford Mustangs.Ford part number D2ZB-10C859-AA. This icon means that we're looking to buy this part!WCCC is a buyer of used and NOS hard to find 67-73 Mercury Cougar parts. Usually we give an in store credit of 50%...
Availability: Used / Wrecking Yard Item
Item #: 10819 -
Starting in 1972 the 'Fasten Seat Belt' warning light was relocated to the center of the dash for visibility of all occupants of the vehicle. This is the bezel only that fastens to the instrument clusters of all 1972-73 Mercury Cougar models.Replaces Ford part # D2WB-10D841-AB.
Availability: In-Stock Item
Item #: 30385 -
New LED dash light kit for the gauges in your Mercury Cougar. Finally, a kit that will provide you the light you need to see your gauges! Not only are these LED lights 8 times brighter than stock, but they will also provide a true factory color while retaining your dimmer function. No modifications are required to use these LED's. NOTE: THESE LED'S ARE NOT DIMMABLE.
Availability: Used / Wrecking Yard Item
Item #: 30987 -
Used wiring harness that goes into the shifter bucket for any 1971-73 Mercury Cougar or Ford Mustang with C6 transmission. This is for the PRNDL light on your shift lever. Automatic C-6 transmission only code U on your door tag. FMX transmissions had the neutral safety switch installed in the shift bucket. Rare part, only found on Q code engines and select H code engines. D1ZZ-15A808-A, D1ZB-15A808-AB, D2ZB-15A808-AA This icon means that we're looking to buy this part!WCCC is a buyer of used...
Availability: In-Stock Item
Item #: 33067 -
Reproduction pair of brass 3/8 ID bushings for the clutch rod. Protects clutch equalizer and rod, and removes excess play.We also sell these in nylon. Replaces Ford Part #: C0AZ-7526-B. Customer review: Called WCCC the other day after calling around to a lot of garages and auto parts stores trying to find out the torq specs for my rocker arms on my Cougar. I wanted to check to make sure they where in specs when I was replacing my valve cover gaskets. No one I called could tell me because it...
Availability: In-Stock Item
Item #: 41497 -
Reproduction clutch pedal return spring, comes complete with two new nylon bushings. Replaces Ford Part #: C8OZ-7534-B.
Availability: Out of Stock
Item #: 31675 -
NOS upper clutch rod that connects the clutch pedal and the Z-bar on any 3 or 4 speed manual transmission in a 1969-70 Mercury Cougar or Ford Mustang. Ford part number C9ZZ-7521-A.
Availability: In-Stock Item
Item #: 33407 -
Reproduction D1ZZ-7528-C Equalizer bar or "Z" bar assembly, for 351 and 429CJ engines with a manual transmission. Fits all years 1971-73 Mercury Cougar and Ford Mustang. Includes frame rail bracket and clutch rod as shown.
Availability: Download
Item #: 90003 -
Here is our free download for the 1968 Mercury Cougar sunroof panel service procedures.
Availability: Download
Item #: 90035 -
11MB Downloadable PDF file of the complete 1972 Mercury Cougar electrical wiring diagram used by Ford Technicians. You will receive a download link both on the order confirmation screen and via email once your order is complete. In this download you will find diagrams for the following systems: Air Conditioning Brake Lights Charging Cigar / Cigarette Lighter Circuit Protection Clock Convenience Systems Convertible Top Defogger Exterior Lights Gauges Head Lamp on Warning Buzzer Heater Defroster...
Availability: In-Stock Item
Item #: 41260 -
Sold individually. Used on factory 2V Ford carburetors. Zinc (dark gray)
Availability: Download
Item #: 90037 -
900KB Downloadable PDF file of the 1971 - 1972 Mercury Cougar Exploded View Grille diagram used by Ford Technicians. You will receive a download link both on the order confirmation screen and via email once your order is complete.
Availability: Download
Item #: 90012 -
This is a digital copy of the installation instructions and troubleshooting guide that comes with the 69-73 electronic sequential units that we sell. Click here to view the Low Quality version of this Trouble Shooting Guide. Add it to your cart to download the High Quality version of this Troubleshooting Guide.*NOTE* Need help diagnosing a Cougar turn signal problem? Victor Yarberry is the world’s most knowledgeable expert on the subject. Vic has owned Cougars since the 1970's and is the...
Availability: Download
Item #: 90021 -
Another great free download for you, our customer! In this free download, John Brower guides you through the installation of an overlay on your dashboard on your Mercury. Simply add this item to your cart and you will receive the download link via email after you complete the order.
Availability: In-Stock Item
Item #: 76547 -
Master clip kit which includes the following fasters:Back up light to firewallDoor speakersEngine ffeedRadio cable to dashSide marker and headlightsTaillight wiring and groundUnder dashVarious location zip tiesKeep in mind that not all fasteners found on 1971-73 Cougars / Mustangs are in this kit.
Availability: In-Stock Item
Item #: 19951 -
These retainer clips work for both the windshield and rear window stainless steel mouldings. These are often times rusty so when you are replacing your seal or trim be prepared to replace a few if not all of them. See chart below to determine how many you need for your application. Replaces Ford Part # :C5ZZ-6542413-C, C5ZZ-65423A26-B or C5ZZ-6543413-B.Sold Individually.We recommend buying the box of 100 clips to be certain you have enough clips with plenty to spare. You'll also save...
Availability: Out of Stock
Item #: 26123 -
This 1/2" tall unique little screw was used on several different trim parts on the early Mercury Cougars. You will notice the reproduction has a larger head (The two on the right in the lower picture are repros) than both of the used versions typically found on 67-73 Cougars. This will be a benefit to those that have elongated screw holes on your wheel lip mouldings from corrosion or improper removal. In 1967 - 1968 there were eight per wheel lip moulding, two per fender extension moulding,...
Availability: In-Stock Item
Item #: 41280 -
Stainless screw, most correct looking we have found. In 1967 - 1968 there were eight per wheel lip moulding, two per fender extension moulding, two per center grille moulding and five per hood lip moulding for a total of 50 screws. In 1969 - 1973 they were used on the wheel lips mouldings. The 1971 - 1973 hood lip mouldings used the same screw but it was 5/8" tall. SOLD AS A SET OF 10.Fits:1967 Mercury Cougar1968 Mercury Cougar1969 Mercury Cougar1970 Mercury Cougar1971 Mercury Cougar1972...
Availability: In-Stock Item
Item #: 41336 -
This is our reproduction quarter panel extension nut for the Mercury Cougar or Ford Mustang. These are sold individually.Replaces Ford part # 373556-S. Fits: 1967 Mercury Cougar1968 Mercury Cougar1969 Mercury Cougar1970 Mercury Cougar 1967 Ford Mustang1968 Ford Mustang1969 Ford Mustang1970 Ford Mustang ...
Availability: In-Stock Item
Item #: 41253 -
Sold individually.
Zinc (dark silver)
Availability: In-Stock Item
Item #: 14321 -
Self threading white plastic. Used on front and rear valances.Sold individually.
Availability: In-Stock Item
Item #: 41610 -
Reproduction exterior convertible boot moulding / trim nuts for the Mercury Cougar or Ford Mustang and Torino. Here's another great reproduction brought to you by WCCC! Each vehicle will require 20 nuts. Sold individually.
Availability: In-Stock Item
Item #: 30880 -
This stepped window trim clip is great for times when your stainless trim just will not click into place. We have found that the reproduction cougar rear window gasket is a little taller than OEM and this adjustable clip allows you to compensate. Another instance this multi-fit clip works is when someone has replaced one or more nail-heads that the clip fastens to and located them in the wrong place.Sold Individually.These clips attach to posts built in to the car. In case you're missing some...
Availability: In-Stock Item
Item #: 32084 -
These retainer clips work for both the windshield and rear window stainless steel mouldings. These are often times rusty so when you are replacing your seal or trim be prepared to replace a few if not all of them. See chart below to determine how many you need for your application. Replaces Ford Part # :C5ZZ-6542413-C, C5ZZ-65423A26-B or C5ZZ-6543413-B.This listing is for a bag of 25 clips. We recommend buying the box of 100 clips to be certain you have enough clips with plenty to spare....
Availability: In-Stock Item
Item #: 32650 -
These retainer clips work for both the windshield and rear window stainless steel mouldings. These are often times rusty so when you are replacing your seal or trim be prepared to replace a few if not all of them. See chart below to determine how many you need for your application. Replaces Ford Part # :C5ZZ-6542413-C, C5ZZ-65423A26-B or C5ZZ-6543413-B.This particular clip is used on many Ford cars throughout the 60's and 70's.This listing is for a box of 100 clips. We recommend buying...
Availability: In-Stock Item
Item #: 30852 -
Stainless screw, most correct looking we have found. In 1967 - 1968 there were eight per wheel lip moulding, two per fender extension moulding, two per center grille moulding and five per hood lip moulding for a total of 50 screws. In 1969 - 1973 they were used on the wheel lips mouldings. The 1971 - 1973 hood lip mouldings used the same screw but it was 5/8" tall. SOLD individually. See related items for kit of 10 screws. Fits: 1967 Mercury Cougar1968 Mercury Cougar1969 Mercury Cougar1970...
Availability: In-Stock Item
Item #: 10627 -
New timing cover gasket set for 1970-73 Mercury Cougar and Ford Mustang with 351C engine. Includes gaskets as shown, timing cover, water pump to timing cover, fuel pump, crankshaft seal, and oil pan saddle.
Availability: In-Stock Item
Item #: 20668 -
Set of 3 bolts for installing an OEM Ford timing cover, which originally came on all 1970-73 Mercury Cougars with 351C or Cleveland engines or 1970-74 Fords including Mustang with 351 Cleveland engines. Also fits 351M and 400M Ford engines*Note - this kit is not applicable to the 351W or Windsor engine. See related items for other kit.
Availability: In-Stock Item
Item #: 12208 -
Reproduction stainless Allen head valve cover bolts. The bolts a re a bit longer to accommodate for the extra spacing required on the aluminum finned valve covers.
Availability: Discontinued
Item #: 12207 -
Reproduction black Allen head valve cover bolts. The bolts a re a bit longer to accommodate for the extra spacing required on the aluminum finned valve covers.
Availability: Used / Wrecking Yard Item
Item #: 31183 -
Crankshaft oil slinger for all 351C or Cleveland engines. Goes on the crankshaft after the timing gear and before the timing chain cover. It does have a purpose on the vintage engines. Ford part number D0AZ-6310-A.
Availability: Discontinued
Item #: 10629 -
New timing cover gasket set for 1970-73 Mercury Cougar and Ford Mustang with 351C engine. Includes gaskets as shown, timing cover, water pump to timing cover, fuel pump, crankshaft seal, and oil pan saddle.
Spotlight!
Featured!
Availability: In-Stock Item
Item #: 13840 -
These valve covers no longer come with the word "Cougar", only the walking cat. Before these high quality reproductions were reproduced original pairs often traded hands for $400-600. This pair is better quality than the originals in every way. They will allow for roller tip rockers (unlike originals) have better quality casting characteristics and are made from better material. These were standard on every 1968 302 XR7-G and an over the counter option for any 289 302 or 351 Windsor equipped...
Availability: In-Stock Item
Item #: 11666 -
Same as our crinkle finished Mercury Cougar valve covers but with a polished finish. These are rarely in stock so do not be surprised if our system will not let you order. We get these from Scott Drake and the only reason they polish a few sets a year is when they find a set of black covers that have a defect, they send them in to be polished. So... The only time we have these in stock is when they find blems to polish. Please do not ask us when we expect to get more in, we have no idea when...
Availability: In-Stock Item
Item #: 26038 -
These "Cal Custom" style Valve Covers look great and really compliment the Finned Oil Pan and Air Cleaner. These covers offer a true "old school" look. * Requires one of each of the following (sold separately): PVC grommet, oil cap grommet, and push on style oil cap.
Availability: In-Stock Item
Item #: 42059 -
These Spark Plug Wire Separators are made of high-quality ABS plastic. Constructed to hold both standard 7mm and 8mm high-performance spark plug wires. Fits directly on valve cover clip. Available in blue, red and OE black.
Availability: In-Stock Item
Item #: 42060 -
These Spark Plug Wire Separators are made of high-quality ABS plastic. Constructed to hold both standard 7mm and 8mm high-performance spark plug wires. Fits directly on valve cover clip. Available in blue, red and OE black.
Availability: In-Stock Item
Item #: 41613 -
Rubber valve cover gaskets for any 289 302 351W Ford engine. Sold in pairs, works well with either stamped steel or cast aluminum valve covers. Excludes Boss 302.
Availability: In-Stock Item
Item #: 41616 -
Cork valve cover gaskets for any 351C or 351 Cleveland Ford engine. Sold in pairs, works well with either stamped steel or cast aluminum valve covers.
Availability: In-Stock Item
Item #: 41607 -
Cork valve cover gaskets for any 289/302/351W Ford engine. Sold in pairs, works well with either stamped steel or cast aluminum valve covers. Excludes Boss 302.
Availability: In-Stock Item
Item #: 41617 -
Rubber valve cover gaskets for any 351C Ford engine. Sold in pairs, works well with either stamped steel or cast aluminum valve covers.
Availability: In-Stock Item
Item #: 11375 -
Reproduction Ford blue painted valve covers for 289 - 302- 351W engines. These have 6 bolts to attach the valve covers. Excludes 351 Cleveland engines, they have 8 bolts for attaching.
Availability: In-Stock Item
Item #: 11376 -
Reproduction chromed valve covers for 289 - 302- 351W engines. These have 6 bolts to attach the valve covers. Excludes 351 Cleveland engines, they have 8 bolts for attaching.
Availability: In-Stock Item
Item #: 27450 -
This adapter allows for slip-on type oil caps to be used on valve covers with the twist-on style cap hole. 1.25" O.D.
Availability: Used / Wrecking Yard Item
Item #: 31972 -
Original used oil filler cap adapter for any 1967 Mercury Cougar or 1965-67 Ford Mustang. This is for use with the open emissions, push on oil cap. This adapter allows for slip-on type oil caps to be used on valve covers with the twist-on style cap hole. 1.25" O.D. Will most definitely need a new gasket. These will ship "as found" or fresh from our wrecking yard. Photo is most cases will show a cleaned part for glamour photography shots. Also have reproduction version.Ford part...
Availability: Used / Wrecking Yard Item
Item #: 12764 -
Please remove your regulator prior to shipping. Be careful of the mechanical energy stored with the spring under tension. This is a rebuild service for the rear pancake motor for the Mercury Cougar or Ford Mustang. We completely disassemble these units, then clean and inspect them. Then we will repair or replace minor pieces inside. Please note that if your core is not rebuildable, there will be an extra charge for installing working parts. After the motor is repaired, we...