Wanted!
Buy
Details
Availability: Out of Stock
Item #: 42516 -
FYI: We do not plate, paint, or prep the backside of these bumpers as they were not done that way from the factory. (Above are examples of the mirror-like shine you can expect. 1969 front bumper shown out in the sun.) These are very sought after and a rare find without the impact strip holes, therefore we cannot guarantee we will have a core available for purchase. These bumpers are re-chromed using the triple plating process. This produces a significantly higher quality finished product...
Wanted!
Buy
Details
Availability: Out of Stock
Item #: 12614 -
This option REQUIRES sending your core in advance. Here are the advantages of pre-sending your core: We can core match your bumper. Bumpers that are re-chromed using a superior quality core are always reserved for core matching. If your core is average or below average, you may be able to pay to upgrade to a re-chromed bumper that started the re-chroming process as a superior quality core. You can find out the quality of your core before paying a core charge and avoid unnecessary core charges....
Wanted!
Buy
Details
Availability: Out of Stock
Item #: 12610 -
This option REQUIRES sending your core in advance. Here are the advantages of pre-sending your core: We can core match your bumper. Bumpers that are re-chromed using a superior quality core are always reserved for core matching. If your core is average or below average, you may be able to pay to upgrade to a re-chromed bumper that started the re-chroming process as a superior quality core. You can find out the quality of your core before paying a core charge and avoid unnecessary core charges....
Wanted!
Buy
Details
Availability: Out of Stock, On Order
Item #: 41787 -
This is a complete kit for front and rear. If you own a 71 - 73 and then you will need two more bolts. mercurycougar.net: I was in Salem on business Monday when I decided to give West Coast Classic Cougar a call. Don was gone but Lin was there, talk about a nice guy I looked around the shop and Lin got me the parts I needed for my 68 Coupe. I am sure Lin was busy but he took the time to answer any questions I had, swapped a few stories and gave me a real good deal. I recommend anyone needing...
Wanted!
Buy
Details
Availability: Out of Stock
Item #: 24740 -
C9WY-17755-A Front bumper mounting bracket, 1969-70 Mercury Cougar driver side.
Wanted!
Buy
Details
Availability: Out of Stock
Item #: 11254 -
Complete five piece set includes the horizontal support as well as the two braces inside the trunk, two brackets that bolt to the bumper and hardware. Checked closely for bends, cracks and stripped threads. What is pictured is the best of what we have, we also have B grade sets that will clean up fine. Pair of inside the trunk bumper mounting brackets D3WY-17A750-A. Passenger side bumper bracket D3WY-17787-A, driver side bumper bracket D3WY-17788-A. Rear bumper center reinforcement beam...
Wanted!
Buy
Details
Availability: Out of Stock
Item #: 19681 -
D1WY-17C838-A Deflector or driver side bumper filler, 1971-72 Mercury Cougar. This icon means that we're looking to buy this part!WCCC is a buyer of used and NOS hard to find 67-73 Mercury Cougar parts. Usually we give an in store credit of 50% of our web price for parts delivered in hand or by carrier to our Brooks, Oregon location. If you're not interested in store credit, just shoot us an email and we will let you know if it's is something we can pay cash for. We do not send cash for parts...
Wanted!
Buy
Details
Availability: Out of Stock
Item #: 19696 -
Rear bumper filler for any 1971-72 Mercury Cougar. No chips or cracks. Comes with fasteners. Replaces Ford part number D1WY-17808-A . * Note - Will not fit 1973 Mercury Cougar.
Wanted!
Buy
Details
Availability: Out of Stock
Item #: 33375 -
Rear bumper filler for any 1971-72 Mercury Cougar. No chips or cracks. Does not come with fasteners or clips. See related items for new aftermarket style clips for attaching, 8 total are needed. Replaces Ford part number D1WY-17808-A . * Note - Will not fit 1973 Mercury Cougar.
Wanted!
Buy
Details
Availability: Out of Stock
Item #: 30994 -
This money saving kit gives you all four rubber bumper fillers that wedge into the 67-8 front and rear bumpers horizontally (the triangular ones) as well as the vertical ones that fasten to the leading edge of the fenders and quarters. Keep in mind when you remove the old rubber parts that we can give in-store credit for reusable parts. Please only send us parts that are not ripped, gouged or warped.
Wanted!
Buy
Details
Availability: Out of Stock, On Order
Item #: 26585 -
Replaces Ford part #C9WY-16B554/5. Good quality part made with correct type of rubber. Sold as pair only.
Wanted!
Buy
Details
Availability: Out of Stock
Item #: 26994 -
Used driver side (left hand) bumper guard for the Mercury Cougar. The chrome plating was pretty low quality back in the day and this unit will show some scratches and pitting as it is an almost 50 year old original part.Ford part # C7WY-17997-A for the driver side.
Wanted!
Buy
Details
Availability: Out of Stock
Item #: 26995 -
Used passenger side (right hand) bumper guard for the Mercury Cougar. The chrome plating was pretty low quality back in the day and this unit will show some scratches and pitting in the chrome as this is an almost 50 year old original part.Ford part # C7WY-17996-A for the passenger side. ...
Wanted!
Buy
Details
Availability: Out of Stock
Item #: 31227 -
Rare find, NOS rubber rub strip for the front bumper guard on 1971-72 Mercury Cougar. These hard rubber bump strips attach to the front bumper guards with 2 studs from the back side. Sold individually, right is the same as left, Ford Casting number as found on the back is D1WB-17A812-AB
Wanted!
Buy
Details
Availability: Out of Stock
Item #: 25558 -
D3AZ-17A812-A Front bumper guard rubber pad used prior to September 5, 1972, on a 1973 Mercury Cougar. The early front bumper guards had a narrow rubber pad early on. The rear flat surface measures 3/4 inches wide. Same rubber strip either right or left side. Hard to find without some scaring on the rubber. This pad is not nearly as common as the wider one which measures about 1-1/8 inches wide.Replaces Ford part number D3AB-17A812-A.
Wanted!
Buy
Details
Availability: Out of Stock
Item #: 25559 -
D3AZ-17A812-B Front bumper guard rubber pad used after September 5, 1972, on a 1973 Mercury Cougar. These later front bumper guards have a rubber pad that measures 1-1/8 inches wide on the flat rear surface. Same rubber strip either right or left side. Hard to find without some scaring on the rubber. This pad is more common than the thinner 3/4 inches wide pad.Replaces Ford part number D3AB-17A812-B.
Wanted!
Buy
Details
Availability: Out of Stock
Item #: 20671 -
Factory used clip for attaching the long black plastic rear bumper filler on any 1971-73 Mercury Cougar. A total of 8 clips are needed to attach the rear bumper filler. Most have either broken with age, or have broken during the removal of the filler. Sold individually. Limited supply of used, we also stock a suitable reproduction clip. See Related.
Wanted!
Buy
Details
Availability: Out of Stock
Item #: 25591 -
D3WY-17K834-A Molded rubber impact strip found on most 1973 Mercury Cougar front bumpers, driver side only. We will seldom have this part in stock, due to its low survival rate and high demand.
Wanted!
Buy
Details
Availability: Out of Stock
Item #: 25590 -
D3WY-17K833-A Molded rubber impact strip found on most 1973 Mercury Cougar front bumpers, passenger side only. We will seldom have this part in stock, due to its low survival rate and high demand.
Wanted!
Buy
Details
Availability: Out of Stock
Item #: 22957 -
The Hustler Stick features heavy-duty 1-1/4" diameter tubing, and is an alignment bar designed for bumpers, hoods, decks, panels etc. Made in the USA, it has a 1/4", 6 foot long chain with hooks at each end. This versatile tool is very useful in shaping damages on a vehicle body. To use it, hook it up to the panel or bumper, anchor the stick properly, and pull it by hand.We will loan this hustler stick for 60 days, with a 100% refundable purchase price. Tool must be returned in undamaged...
Wanted!
Buy
Details
Availability: Out of Stock, On Order
Item #: 30421 -
Exact reproduction of originals but improved!On the originals, the mounting holes did not line up properly so we made them fit perfect!Made using the original Ford blue prints and a NOS original for the pattern. Replaces Ford part numbers C7WY16B555-A and C7WY-16B554-A
Wanted!
Buy
Details
Availability: Out of Stock
Item #: 25584 -
Rubberized bumper filler combination stone deflector, that mounts on the driver side fender on a 1973 Cougar. This unit is also known as a bumper filler, rock guard, or filler panel. Grade A used condition, may have a defect that can't be seen when installed.Replaces Ford part number D3WY-17779-B.
Wanted!
Buy
Details
Availability: Out of Stock
Item #: 16133 -
Rubberized bumper filler combination stone deflector, that mounts on the driver side fender on a 1973 Cougar. This unit is also known as a bumper filler, rock guard, or filler panel. Grade B used condition, will have a minor crack or tear, which will be visible when installed. Replaces Ford part number D3WY-17779-B.
Wanted!
Buy
Details
Availability: Out of Stock
Item #: 15803 -
Rubberized bumper filler combination stone deflector, that mounts on the passenger side fender on a 1973 Cougar. This unit is also known as a bumper filler, rock guard, or filler panel. Grade B used condition, will have a minor crack or tear, which will be visible when installed. Replaces Ford part number D3WY-17779-A.