 |
 1967 - 1968 Mercury Cougar XR7 Overhead Console Map Lights - Repro(Click Here for More Information or to Order) Price:$44.00
Sale price: $39.00
These are a great reproduction at a great price. These are always pitted and before these came out three years ago...
|
|
|
 1967 - 1968 Mercury Cougar Overhead Console mounting bracket - Used(Click Here for More Information or to Order) Price:$35.00
This part is now reproduced but at a retail cost of $50. This good used original unit is a better fit for less money. Also fits 1967 - 1968 Coupe and Fastback Ford Mustang.
|
|
|
 1967 - 1970 Mercury Cougar Sun Visor Bracket & Rod - Repro(Click Here for More Information or to Order) Price:$15.00
Great quality and fit, left and right use same part, sold separately.
|
|
|
 1968 Mercury Cougar Center Visor Bracket - Repro(Click Here for More Information or to Order) Price:$22.00
Sale price: $15.85
Available only in black or neutral. We have a large selection of good colored used brackets.
|
|
|
 1969 - 1973 Mercury Cougar Coat & Shoulder Hook - Repro(Click Here for More Information or to Order) Price:$10.00
Sold in a pair, black only. We have an array of colors in good used condition used . . .
|
|
|
 1968 - 1973 Mercury Cougar Coat Hook Base - Repro(Click Here for More Information or to Order) Price:$4.00
These are the plastic brackets that screw to you roof and then slide the vinyl colored piece over.
|
|
|
 1969 - 1970 Mercury Cougar / Ford Mustang Interior Convertible "A" Pillar Mouldings - Repro(Click Here for More Information or to Order) Price:$110.00
Nice reproduction of a commonly damaged part...
|
|
|
 1971 - 1973 Mercury Cougar Dome Lamp Lens Housing - Repro(Click Here for More Information or to Order) Price:$20.00
Includes bulb, nice chrome finish. This was used on many Ford products but only your basic 71-3 hardtop Cougar's. No Cougar had a dome light in 1967-70.
|
|
|
 1971 - 1973 Mercury Cougar Dome Light Lens - Repro(Click Here for More Information or to Order) Price:$11.00
Great fit. There were two different mounting tab styles used in the 1970's, this one is correct for the housing we sell and the only type offered.
|
|
|
 1971 - 1973 Mercury Cougar Visor Pin & Tip - Repro(Click Here for More Information or to Order) Price:$3.85
Gray plastic rod with rubber visor tip. Fits most 70's cars built by Ford.
|
|
|
 1967 Mercury Cougar Coat Hooks - Repro(Click Here for More Information or to Order) Price:$10.00
Sold as pair, exact copy. These also double to keep your wind lace firmly in place.
|
|
|
 1968 Mercury Cougar Shoulder Harness Seat Belt Hook Passenger Side - Used(Click Here for More Information or to Order) Price:$22.00
Used to store your shoulder belt above the wind lace on the passenger side. These are often rusty, missing or broken. I am not aware of any reproductions being made.
|
|
|
| 1968 Mercury Cougar Shoulder Harness Seat Belt Hook Drivers Side - Used (Click Here for More Information or to Order) Price:$28.00
Used to store your shoulder belt above the wind lace on the drivers side (harder to find than passenger side). These are often rusty, missing or broken. I am not aware of any reproductions being made.
|
|
|
 1967 - 1973 Mercury Cougar Sun Visor Tips - Repro(Click Here for More Information or to Order) Price:$1.80
If your visors constantly fall out of the center holder these are probably missing or shrunken.
|
|
|
 1969 - 1970 Mercury Cougar Center Visor Bracket - Repro(Click Here for More Information or to Order) Price:$22.00
Sale price: $15.85
Reproductions only come in black but we have most all colors in used.
|
|
|
 1967 - 1968 Mercury Cougar Interior Headliner - Repro(Click Here for More Information or to Order) Price:$60.00
Sale price: $48.50
Correct Moon Crater texture available in most stock colors. We also have . . .
|
|
|
| 1971 - 1973 Mercury Cougar Headliner - Repro (Click Here for More Information or to Order) Price:$70.00
Sale price: $49.00
Correct Reproduction Headliner for the 1971, 1972 & 1973 Mercury Cougar
|
|
|
 1967 - 1973 Mercury Cougar Headliner Bow Set - Used(Click Here for More Information or to Order) Price:$42.00
This is a good used set of headliner bows taken from a...
|
|
|
 1967 - 1973 Mercury Cougar Sun Visors - Repro(Click Here for More Information or to Order) Price:$40.00
Sale price: $35.00
Visors are fully padded and covered with the correct textured vinyl your your application. 1967-1968 used a moon skin texture to match the headliner, 1969-1970 used a smooth vinyl to match the seats and 1971-1973 most often used a smooth vinyl but many of them used a tier grain vinyl to match the headliner. Our 1971-1973 visors are smooth grain but we do have good used visors for your 1971-1973 in the tier grain. Sold as a Pair.
|
|
|
 1969 - 1970 Mercury Cougar Interior Sail Panels - Repro(Click Here for More Information or to Order) Price:$19.00
Yet another incorrect reproduction sold by West Coast Classic Cougar and made by someone who has never even sat in a Cougar...
|
|
|
 Package Tray Covers / Insulation(Click Here for More Information or to Order)
Trim, Fasteners, Templates and all things associated with the package tray can be found in this section.
|
|
|
 1969 - 1970 Mercury Cougar Perforated Head Liner - Repro(Click Here for More Information or to Order) Price:$49.00
We have finally found a supplier that produces the correct dark red, medium blue . . .
|
|
|
 1969 - 1970 Mercury Cougar / Ford Mustang Convertible Top Bow Pads - Repro(Click Here for More Information or to Order) Price:$35.00
Used to cushion and protect top vinyl from excessive wear from side rails.
|
|
|
 1971 - 1973 Mercury Cougar / Ford Mustang Convertible Top Bow Pads - Repro(Click Here for More Information or to Order) Price:$35.00
Used to cushion and protect top vinyl from excessive wear from side rails.
|
|
|
 1971 - 1973 Mercury Cougar Coupe / Convertible Interior "A" Pillar Trim / Moulding Driver Side - Used(Click Here for More Information or to Order) Price:$62.75
This moulding is correct for coupe and convertible. On convertibles the top portion is trimmed to allow it to slide under the sun visor bracket.
|
|
|
 1971 - 1973 Mercury Cougar Coupe / Convertible Interior "A" Pillar Trim / Moulding Passenger Side - Used(Click Here for More Information or to Order) Price:$62.75
This moulding is correct for coupe and convertible. On convertibles the top portion is trimmed to allow it to slide under the sun visor bracket. The engineering number imprinted on the back is D1ZB-6503599-AWD for 1971-1972 and D3ZB-6503599-AWD for 1973.
|
|
|
 1971 - 1973 Mercury Cougar Coupe Interior Roof Trim Passenger Side - Used(Click Here for More Information or to Order) Price:$19.75
Metal trim part that connects the "A" pillar plastic moulding to the rear window (quarter window) moulding on the inside.
|
|
|
 1971 - 1973 Mercury Cougar Coupe Interior Roof Trim Driver Side - Used(Click Here for More Information or to Order) Price:$19.75
Driver side metal trim part that that runs along the interior roof edge and connects the "A" pillar plastic moulding to the rear window (quarter window) moulding on the inside.
|
|
|
 1971 - 1973 Mercury Cougar Coupe Interior Quarter Window Trim Driver Side - Used(Click Here for More Information or to Order) Price:$24.75
Ford engineering number found on the back of 1971-1972 examples is D1WB-65517A87-AWA and D3WB-65517A87-AWA found on 1973 Coupes. This trim installs vertically behind the quarter window. We cannot guarantee we will be able to supply the color of your choice but we will try to accommodate.
|
|
|
 1971 - 1973 Mercury Cougar Coupe Interior Quarter Window Trim Passenger Side - Used(Click Here for More Information or to Order) Price:$24.75
Ford engineering number found on the back of 1971-1972 examples is D1WB-65517A86-AWA and D3WB-65517A86-AWA found on 1973 Coupes. This trim installs vertically behind the quarter window. We cannot guarantee we will be able to supply the color of your choice but we will try to accommodate.
|
|
|
 1971 - 1973 Mercury Cougar Coupe Interior Rear Package Tray Trim Passenger Side - Used(Click Here for More Information or to Order) Price:$24.75
This trim part fits at the passenger side of the rear window package tray. These are often sun baked but will will be sure and pick out a clean one. The engineering number on the backside is D1WB-65310A32-AWA. We cannot guarantee we will be able to supply the color of your choice but we will try to accommodate.
|
|
|
 1971 - 1973 Mercury Cougar Coupe Interior Rear Package Tray Trim Driver Side - Used(Click Here for More Information or to Order) Price:$24.75
This trim part fits at the driver side of the rear window package tray. These are often sun baked but will will be sure and pick out a clean one. The engineering number on the backside is D1WB-65310A33-AWA. We cannot guarantee we will be able to supply the color of your choice but we will try to accommodate.
|
|
|
 1967 - 1968 Mercury Cougar Rear Courtesy Light Lenses Grade "B" - Used(Click Here for More Information or to Order) Price:$23.75
These less than perfect lights are driver quality at best and are sure to have a few "warts" which can show up as pitting in the chrome, stress cracks in the lens or a little of both. We will not send you junk but if you are a perfectionist you certainly will not like them. Our suggestion is you wait until 2009 when our reproductions are available. They will cost about what these grade "B" lenses do.
|
|
|
 1967 - 1968 Mercury Cougar Rear Courtesy Light Lenses Grade "A" - Used(Click Here for More Information or to Order) Price:$72.50
These used lights are sold individually and are they very best we can provide but as shown will not be 100% mint. Our reproductions should be available Spring 2009 and will be a fraction of the cost. Stay tuned!
|
|
|
 1967 - 1968 Mercury Cougar Rear Courtesy Light Housings - Used(Click Here for More Information or to Order) Price:$34.85
These two lights are marked LH for the driver side and RH for the passenger side. They are located on the "C" pillar just above the rear package tray. We hope to have reproduction covers (lenses) for them in 2009 at a very reasonable price.
|
|
|
 1971 - 1973 Mercury Cougar Convertible Visor Bracket - Repro(Click Here for More Information or to Order) Price:$22.00
Sale price: $15.85
Not an exact match, but will work . . .
|
|
|
 1971 - 1973 Mercury Cougar Coupe Visor Bracket - Repro(Click Here for More Information or to Order) Price:$22.00
Sale price: $15.85
Only Available in Black. We have most other colors in unfaded used.
|
|
