Home > 1970 Mercury Cougar
All Available Parts - 1970 Mercury Cougar
Products (Click sub-categories above to ONLY display results for that Sub-Category) 201-300 of 5050
Sorted By:
Availability:
Display Options:
Availability: In-Stock Item
Item #: 19417 -
For those wanting to make their own "custom" package tray this will assist you in getting the correct dimensions the first time. This template is traced from a reproduction packege tray onto a piece of butcher paper.
Availability: Out of Stock
Item #: 26798 -
If losing weight in your 1969 - 1970 Coupe is what you are after then this would be a good part for you as it weighs less than one pound and the original weighs approximately five pounds. The original is made of the same material as the sound deadener found under the carpet and we rarely get good examples in stock.
Availability: In-Stock Item
Item #: 42103 -
Unfortunately this is yet another incorrect reproduction made by someone who has never even sat in a Cougar. No embossment, no courtesy light holes if you have xr7 and no foil backing. These are sold as a pair. There are two different sources that will hand make these to show quality specs, you can locate them at www.mercurycougar.net Sorry, we never get good used units in these days. *NOTE* This would be a good time to purchase trunk filler boards and package tray if you need...
Availability: In-Stock Item
Item #: 42105 -
Wow! Almost nothing is 100% correct about these rear package trays... No, your monitor is not out of adjustment, these colors are truly wrong except for the black. A couple of the colors are "close" to original but most will have to be repainted if you are concerned about correctness. The mesh is much lighter weight than the original and the speaker holes are not exact but the fit is good and overall this is a durable attractive piece. NOTE: Package Tray has a perforation you have to bend on...
Availability: In-Stock Item
Item #: 42107 -
Wow! Almost nothing is 100% correct about these rear package trays... No, your monitor is not out of adjustment, these colors are truly wrong except for the black. A couple of the colors are "close" to original but most will have to be repainted if you are concerned about correctness. The mesh is much lighter weight than the original and the speaker holes are not exact but the fit is good and overall this is a durable attractive piece. If you buy the insulation pad that lies beneath this panel...
Availability: In-Stock Item
Item #: 42109 -
Wow! Almost nothing is 100% correct about these rear package trays... No, your monitor is not out of adjustment, these colors are truly wrong except for the black. A couple of the colors are "close" to original but most will have to be repainted if you are concerned about correctness. The mesh is much lighter weight than the original and the speaker holes are not exact but the fit is good and overall this is a durable attractive piece. NOTE: Package Tray has a perforation you have to bend on...
Availability: In-Stock Item
Item #: 42111 -
Wow! Almost nothing is 100% correct about these rear package trays... No, your monitor is not out of adjustment, these colors are truly wrong except for the black. A couple of the colors are "close" to original but most will have to be repainted if you are concerned about correctness. The mesh is much lighter weight than the original and the speaker holes are not exact but the fit is good and overall this is a durable attractive piece. If you buy the insulation pad that lies beneath this panel...
Availability: In-Stock Item
Item #: 42104 -
Wow! Almost nothing is 100% correct about these rear package trays... No, your monitor is not out of adjustment, these colors are truly wrong except for the black. A couple of the colors are "close" to original but most will have to be repainted if you are concerned about correctness. The mesh is much lighter weight than the original and the speaker holes are not exact but the fit is good and overall this is a durable attractive piece. NOTE: Package Tray has a perforation you have to bend on...
Availability: Used / Wrecking Yard Item
Item #: 11367 -
These fasteners were used to keep your package tray in place. In 1969 - 1970 the two clips were held in place with screws. Sold individually. We have seen various tech type screw with both large and small heads on them for fastening these clips. Same clip as was used in 1967-68, but without the push clip. We try to supply the screw, but you would likely want to get fresh ones, they are nothing special.Replaces Ford part number C4AB-6246698-A.
Availability: In-Stock Item
Item #: 42106 -
Wow! Almost nothing is 100% correct about these rear package trays... No, your monitor is not out of adjustment, these colors are truly wrong except for the black. A couple of the colors are "close" to original but most will have to be repainted if you are concerned about correctness. The mesh is much lighter weight than the original and the speaker holes are not exact but the fit is good and overall this is a durable attractive piece. NOTE: Package Tray has a perforation you have to bend on...
Availability: In-Stock Item
Item #: 11644 -
Wow! Almost nothing is 100% correct about these rear package trays... No, your monitor is not out of adjustment, these colors are truly wrong except for the black. A couple of the colors are "close" to original but most will have to be repainted if you are concerned about correctness. The mesh is much lighter weight than the original and the speaker holes are not exact but the fit is good and overall this is a durable attractive piece. NOTE: Package Tray has a perforation you have to bend on...
Availability: Used / Wrecking Yard Item
Item #: 30483 -
This knurled nut is located under the front slides in each corner (1 per side, 2 per car) and is used to adjust the height of the sun roof panel.
Availability: Used / Wrecking Yard Item
Item #: 30486 -
Curved aluminum cable guide as seen on page 13 of the sun roof manual. Golde part number 100 413 682
Availability: Used / Wrecking Yard Item
Item #: 30674 -
Curved aluminum cable guide as seen on page 13 of the sun roof manual. Golde part number 100 413 681
Availability: Used / Wrecking Yard Item
Item #: 30676 -
Front guide that measures 10 5/8" long held in place by four screws. The driver side has no markings but the passenger side is stamped with an R and the inner 2 screw holes are in a different place than the driver.
Availability: Used / Wrecking Yard Item
Item #: 30675 -
Front guide that measures 10 5/8" long held in place by four screws. The driver side has no markings but the passenger side is stamped with an R and the inner 2 screw holes are in a different place than the passenger.
Availability: Used / Wrecking Yard Item
Item #: 30677 -
Guide that measures 10 5/8" long held in place by the outer trim that has four screws. Driver and Passenger are interchangeable.
Availability: Used / Wrecking Yard Item
Item #: 30678 -
This part mates to and is held down by Golde #100 413 682. The Golde part number for the smaller, lower elbow guide is 100 413 663
Availability: Used / Wrecking Yard Item
Item #: 30679 -
This part mates to and is held down by Golde #100 413 681. The Golde part number for the smaller, lower elbow guide is 100 413 664
Availability: Used / Wrecking Yard Item
Item #: 32915 -
This strip has a series of five retaining clips that hold the headlining panel to the roof panels as seen on page 14 of the sun roof manual.This is for the 1971-73 Mercury Cougar with factory sunroof. Sunroof measurements are roughly 19-1/2 x 39 inches. This panel is 32-1/4 inches long with 5 clips as shown.
Availability: Used / Wrecking Yard Item
Item #: 15-0401 -
Reproduction wrench or crank, for manually closing the factory installed sunroof installed on any 1967-73 Mercury Cougar. Sunroofs, technically moonroofs, were originally installed by ASC or American Sunroof Corporation. Hertz 1968 XR7-G cars all came with factory sunroofs, as did the Hertz rental 1969-70 Cougar Eliminators. ASC also installed sunroofs in Ford Thunderbird, Lincoln MK III.ASC used Golde mechanical parts from Germany. Golde was a manufacturer of sliding canvas and metal roofs on...
Availability: Used / Wrecking Yard Item
Item #: 30480 -
This strip has a series of seven retaining clips that hold the headlining panel to the roof panels as seen on page 14 of the sun roof manual.
Availability: Used / Wrecking Yard Item
Item #: 30481 -
This part is located in the right front corner of the panel and has to be rotated inward to remove it from the guide rail so the panel cannot be removed. Imprinted on the plastic portion of the part is a Golde part number 100 414 645. Ford part number C8WY-65502L08-A
Availability: In-Stock Item
Item #: 26181 -
For fixed steering wheel. Special molded rubber sleeve that holds the bearing in place. Exact reproduction. Replaces Ford part # D1AZ-3518 or E2AZ-3518
Availability: Used / Wrecking Yard Item
Item #: 15-0021 -
Good used part without excessive rust or damaged rubber. For use with fixed column only.
Availability: Out of Stock
Item #: 15-0083 -
Used plunger spring used in the bale of the tilt / tilt away steering column found in the Mercury Cougar or Ford Mustang. Small plunger spring for 1967-69 tilt columns. Maintains pressure on the heavy wire tilt release bale. This icon means that we're looking to buy this part!WCCC is a buyer of used and NOS hard to find 67-73 Mercury Cougar parts. Usually we give an in store credit of 50% of our web price for parts delivered in hand or by carrier to our Brooks, Oregon location. If you're not...
Availability: In-Stock Item
Item #: 15-0115 -
New foam insulation for the lower tube of the steering columns. Can be used on fixed and tilt columns, from 1968-73, on all Mercury Cougars, Ford Mustangs, and most all other Ford steering columns with a lower tube with inside diameter of 1-5/8 inches. The originals have almost always disintegrated. Adhesive probably isn't needed, but we recommend just a little drop of something to hold it in place. This is a dense foam insulation ring. DIY guys, this material can be found in bulk at home...
Availability: In-Stock Item
Item #: 10121 -
Reproduction rag joint for the fixed steering column in the Mercury Cougar or Ford Mustang. This assembly is for the fixed column only and will not work for the tilt / tilt away steering column. Our reproduction rag joint comes assembled with the lower splined casting.
Availability: In-Stock Item
Item #: 11822 -
12-point bolt for attaching the steering column coupler to the steering box. Works for all 1967-73 Mercury Cougars and most other Fords, Mercury, and Lincolns. One bolt used for fixed columns, two bolts used on tilt steering columns. Sold individually.
Availability: In-Stock Item
Item #: 27601 -
Reproduction insulator for the lower portion of the steering column found on all 1969-73 Mercury Cougar or Ford Mustangs. Unique slide in plastic bushing or insulator, which slides into the bottom tube of both fixed and tilt columns. Most originals are broken or missing. Two sizes of insulators, please verify year and diameter.1968 tube measures 1 3/8"1969 - 1973 tube measures 1 5/8"*NOTE* WCCC services all FoMoCo tilt and tilt-tilt away steering columns 1967-1979. Our shop rate for this...
Availability: Used / Wrecking Yard Item
Item #: 15-0146 -
Used Release Spring for the 1967 - 1973 Mercury Cougar / 1967 - 1973 Ford Mustang
Availability: Used / Wrecking Yard Item
Item #: 15-0145 -
Used Spring Sleeve Cap for the 1967 - 1973 Mercury Cougar / 1967 - 1973 Ford Mustang
Availability: Out of Stock
Item #: 26213 -
This kit is similar to the original type mounted in every drivers side door. These OEM style Riv-Nuts will be a challenge to install unless you have the special tool. Almost every body shop will have this rivet gun type of tool but here are a couple of ways to tackle the installation without the correct tool. Hole size is 1/4". Replaces Ford Part #: C7AZ-17696. Check out our video below for more info on mirror installation: Still have riv-nut questions? Here are riv-nut answers! ...
Availability: Used / Wrecking Yard Item
Item #: 15-0151 -
This is the brass piece that connects the keylock to the ignition switch.
Availability: Used / Wrecking Yard Item
Item #: 15-0180 -
Floor mounting column bracket for the 69-70 Cougar or Mustang. Rubber gasket may not come with bracket, and if it does will most likely need replacing. Undamaged with original fasteners. Get the gasket here.Ford part number C9ZZ-65017A50-A.
Availability: In-Stock Item
Item #: 15-0173 -
Used return spring for any 1970 - 1978 Cougar or Mustang Tilt Column. This spring provides return tension on tilt steering wheels.*NOTE* For tilt column service, you can contact Tony Augustine at 6t8cougarguy@gmail.com. Tony is a trusted colleague of WCCC and we've sent many customers his way since our column specialist retired last year.
Availability: In-Stock Item
Item #: 15-0203 -
This extension holds the inner spring tube in place on the 70 - 73 column.Ford part number: D0AA-3790-CW
Availability: In-Stock Item
Item #: 15-0178 -
Used snap ring that is used to hold the bearing on you the steering shaft. This ring was used on 67 - 78 fixed columns and 70 - 78 tilt columns. Not for use on 67 - 69 tilt columns.*NOTE* For tilt column service, you can contact Tony Augustine at 6t8cougarguy@gmail.com. Tony is a trusted colleague of WCCC and we've sent many customers his way since our column specialist retired last year. ...
Availability: In-Stock Item
Item #: 15-0179 -
Used retainer / friction clip that replaces broken injected plastic shaft retainers on fixed or tilt steering collapsible columns on most FoMoCo products starting in 1968 and through the 70's. Ford part number C9AZ-3E629-B. *NOTE* For tilt column service, you can contact Tony Augustine at 6t8cougarguy@gmail.com. Tony is a trusted colleague of WCCC and we've sent many customers his way since our column specialist retired last year. ...
Availability: In-Stock Item
Item #: 31804 -
This clip goes on the upper end of your column and keeps your steering shaft from moving around when you pull up on your steering wheel.
Availability: Used / Wrecking Yard Item
Item #: 32024 -
Used upper and lower inner steering column shafts for a fixed steering column on the 1970 Cougar or Mustang. Bushings will be intact and in good shape.
Spotlight!
Featured!
Availability: In-Stock Item
Item #: 32067 -
Reproduction 3D printed retainer / friction clip that replaces broken injected plastic shaft retainers on fixed or tilt steering collapsible columns on most FoMoCo products starting in 1968 and through the 70's. These installs on the upper piece of what Ford called the Steering Column Shaft Assembly, also known as the inner steering column collapsible shaft. The Steering Column Shaft Assembly is the 2 piece shaft that connects the steering wheel to the rag joint. The upper...
Availability: In-Stock Item
Item #: 22619 -
Reproduction transmission selector tube seal for the 69 - 70 Cougar or Mustang steering columns.
Availability: Out of Stock
Item #: 15-0189 -
Inner steering column shaft for a fixed steering column on the 1970 Cougar or Mustang.
Availability: Used / Wrecking Yard Item
Item #: 15-0190 -
Used lower steering column shaft for 70 - 73 Cougars and Mustangs with a fixed column. Identified by length, and the round style lower flange. 1968-69 lower flange is slightly smaller with flat sides. Overall length is 16-3/8 inches.
Availability: In-Stock Item
Item #: 32897 -
Used sleeve for fixed steering wheel. Special molded rubber sleeve that holds the bearing in place. Ford part # D1AZ-3518 or E2AZ-3518
Availability: Used / Wrecking Yard Item
Item #: 33443 -
Used bracket for mounting a steering column to the instrument panel on any 1970-71 Mercury Cougar or Ford Mustang. Main bracket only, there is also a side support bracket that is also needed. Bracket also used on 1970 full sized Ford and Mercury cars, and 1970-71 Ford Maverick. Tilt and fixed steering columns.Ford part number D0AZ-3676-A.
Availability: Used / Wrecking Yard Item
Item #: 33444 -
Used lateral or side bracket for mounting the steering column to the instrument panel on any 1970-71 Mercury Cougar or Ford Mustang. Support bracket only, there is also a large support bracket that is also needed. Tilt and fixed steering columns.Bracket also used on 1970 full sized Ford and Mercury cars, and 1970-71 Ford Maverick. Ford part number D0ZZ-3B139-A.
Availability: Used / Wrecking Yard Item
Item #: 15-0028 -
Correct nut that is designed not to come undone.
Availability: Ships Direct from Supplier (Except International)
Item #: 30363 -
Reproduction Chrome / Black Leather steering wheel for your 68 - 73 Mercury Cougar. This kit includes: Steering wheel, hub, horn button and center decal. Hardware included.
Availability: In-Stock Item
Item #: 30365 -
Reproduction Chrome / Woodgrain steering wheel for your 68 - 73 Mercury Cougar. This kit includes: Steering wheel, hub, horn button and center decal. Hardware included.
Availability: Ships Direct from Supplier (Except International)
Item #: 30876 -
Reproduction Chrome / Dark Mahogany Woodgrain steering wheel for your 68 - 73 Mercury Cougar. This kit includes: Steering wheel, hub, horn button and center decal. Hardware included.
Availability: Ships Direct from Supplier (Except International)
Item #: 32643 -
Reproduction Black Steel / Black Leather steering wheel for your 68 - 73 Mercury Cougar. This kit includes: Steering wheel, hub, horn button and center decal. Hardware included.
Availability: Ships Direct from Supplier (Except International)
Item #: 32645 -
Reproduction thick grip Mahogany Woodgrain / Chrome steering wheel for your 68 - 73 Mercury Cougar. This kit includes: Steering wheel, hub, horn button and center decal. Hardware included.
Availability: Ships Direct from Supplier (Except International)
Item #: 32649 -
Reproduction Chrome / Black Leather 4 spoke steering wheel for your 68 - 73 Mercury Cougar. This kit includes: Steering wheel, hub, horn button and center decal. Hardware included.
Availability: Ships Direct from Supplier (Except International)
Item #: 11992 -
Reproduction reinforcement plate designed to weld onto the lower control arms. Sold individually, we are not sure that you would want to even buy one of these. They don't fit very well, and are not contoured to any lower control arm on the market. You will be bending these to fit, prior to welding. *Note - This is a non-returnable item.
Availability: Used / Wrecking Yard Item
Item #: 30488 -
Ultra rare C-6 transmission cast iron tail shaft for any 428 Cobra Jet or 429 Cobra Jet. Nice condition, has casting number RT-C8OP-7A040-A on side as shown. 1968-71 Mercury Cougar, Ford Mustang and Torino / Cyclone / Ranchero with Q or R code 428CJ engines including 428SCJ engines. J and C code 429CJ engines too for 1970-71.Ford MPC number C8OZ-7A039-B.
Availability: Used / Wrecking Yard Item
Item #: 30787 -
Good used OEM flex plate for all 69 - 73 Mercury Cougar and Ford Mustang with 302 / 351W engines, and C4 or FMX transmissions. Not for use on a 1968 with 302. The starter ring will show wear and some will choose to replace, others have removed the starter ring and just turned it around so the unused portion of the ring will now contact the starter drive gear. ...
Availability: In-Stock Item
Item #: 31243 -
New torque converter nuts for connecting torque converters to flex plates on 1967-73 Mercury Cougar or 1967-73 Ford Mustang or other Ford Lincoln Mercury that is not metric. 3/8-24 threads, Grade 8 nut with a 9/16 inch hex. 0.79" OD and 0.39" thick. Torque converters use 4 nuts for attachment.Ford number 377704-S
Availability: Used / Wrecking Yard Item
Item #: 16-0017 -
Used FMX transmission tail shaft or housing extension as Ford called them in the Master Parts Catalog. Fits all 1969-73 Mercury Cougar and Ford Mustang cars with transmission code X on the door tag. Cast aluminum construction. D2ZP-7A040-A version also available, we have a good supply of the updated 1972 version. The overall length of this housing is 12 7/8", which was also used on 1969 Fairlanes and Torinos. This housing will not fit full sized Ford Mercury cars that have an FMX,...
Availability: Used / Wrecking Yard Item
Item #: 16-0087 -
Used FMX transmission tail shaft or housing extension as Ford called them in the Master Parts Catalog. Fits all 1969-73 Mercury Cougar and Ford Mustang cars with transmission code X on the door tag. Cast aluminum construction. C9ZP-7A040-A version also available for slightly more money. Exact same part, just got updated for some engineering or manufacturing reason. The overall length of this housing is 12 7/8", which was also used on 1969 Fairlanes and Torinos. This housing will not...
Availability: In-Stock Item
Item #: 11274 -
Curved Monte Carlo Bar in a chrome finish for Mercury Cougar and Ford Mustang. The Monte Carlo Bar was originally developed by Carroll Shelby to help maintain proper wheel alignment under hard cornering. Not only will this item help stiffen the notoriously flexy front end, it will also help reduce the chances that your shock towers will develop stress cracks over time. Replaces Ford part # C9ZZ-16A052-BRC. ...
Availability: In-Stock Item
Item #: 10135 -
Curved Monte Carlo Bar in a black finish for Mercury Cougar and Ford Mustang. The Monte Carlo Bar was originally developed by Carroll Shelby to help maintain proper wheel alignment under hard cornering. Not only will this item help stiffen the notoriously flexy front end, it will also help reduce the chances that your shock towers will develop stress cracks over time. Replaces Ford Part # C9ZZ-16A052-BRB. ...
Availability: In-Stock Item
Item #: 11277 -
Straight Monte Carlo Bar in a black finish for Mercury Cougar and Ford Mustang. The Monte Carlo Bar was originally developed by Carroll Shelby to help maintain proper wheel alignment under hard cornering. Not only will this item help stiffen the notoriously flexy front end, it will also help reduce the chances that your shock towers will develop stress cracks over time. Replaces Ford part # C9ZZ-16A052-ARB.
Availability: Used / Wrecking Yard Item
Item #: 13157 -
Metal reinforcing plate welded to the center of the rear body, where the 9 inch third member may come into contact with the floor. Cut from one of our many parts cars. Likely originally had a Ford part number of 4731. Removed from a 1969-70 Mercury Cougar, we suspect that it will not be a direct fit for a Mustang. This part will come as shown, spot welds will need to be drilled and the plate welded to your chassis.
Availability: In-Stock Item
Item #: 11276 -
Straight Monte Carlo Bar in a chrome finish for Mercury Cougar and Ford Mustang. The Monte Carlo Bar was originally developed by Carroll Shelby to help maintain proper wheel alignment under hard cornering. Not only will this item help stiffen the notoriously flexy front end of your coddled cream puff cruiser or hardcore corner carver, it will also help reduce the chances that your shock towers will develop stress cracks over time. Replaces Ford part # C9ZZ-16A052-ARC. ...
Availability: Ships Direct from Supplier (Except International)
Item #: 26546 -
Two-piece Stainless Rear Axle Brake Line Set 70 Mercury Cougar and Ford Mustang with 9" Rear Axle. The Rear Axle Brake Lines are mounted on the axle going to the left and right rear wheels. These will either connect to a caliper hose or thread directly into a wheel cylinder. All lines come Pre-Bent and flared with the correct threaded fittings which reduces your install time tremendously. These stainless-steel lines are T304 but are of a special softer blend to help with any possible leaks. ...
Availability: In-Stock Item
Item #: 26547 -
Two-piece OE-Style steel Rear Axle Brake Line Set 67 Mercury Cougar and Ford Mustang with 9"-28 Spline Rear Axle. The Rear Axle Brake Lines are mounted on the axle going to the left and right rear wheels. These will either connect to a caliper hose or thread directly into a wheel cylinder. All lines come Pre-Bent and flared with the correct threaded fittings which reduces your install time tremendously. These mild steel lines are Galphan coated for added protection. 1970 differs from 69...
Availability: Special Order, Ships Direct from Supplier
Item #: 14547 -
Upholstery components have an ETA of 5 - 9 weeks.Door Tag Trim Code: FA. White XR7 vinyl upholstery to cover the front buckets.*NOTE* This product will take 4 – 6 weeks for delivery.
Availability: Special Order, Ships Direct from Supplier
Item #: 14383 -
Upholstery components have an ETA of 5 - 9 weeks.Door Tag Trim Code: 6A. Black XR7 Vinyl Upholstery to cover the front buckets and rear seat.*NOTE* This product will take 6 - 8 weeks for delivery.
Availability: Special Order, Ships Direct from Supplier
Item #: 14393 -
Upholstery components have an ETA of 5 - 9 weeks.Door Tag Trim code: 6D. Dark Red XR7 vinyl upholstery kit to cover the front buckets and rear seat for the convertible.*NOTE* This product will take 6 - 8 weeks for delivery.
Availability: Special Order, Ships Direct from Supplier
Item #: 14388 -
Upholstery components have an ETA of 5 - 9 weeks.Door Tag Trim Code: 6B. Medium Blue XR7 Vinyl Upholstery to cover the front buckets and rear seat.*NOTE* This product will take 6 - 8 weeks for delivery.
Availability: Special Order, Ships Direct from Supplier
Item #: 14541 -
Upholstery components have an ETA of 5 - 9 weeks.Door Tag Trim Code: 6F. Medium Brown XR7 Vinyl Upholstery to cover the front buckets and rear seat.*NOTE* This product will take 6 - 8 weeks for delivery.
Availability: Special Order, Ships Direct from Supplier
Item #: 14543 -
Upholstery components have an ETA of 5 - 9 weeks.Door Tag Trim Code: 6G. Medium Green XR7 Vinyl Upholstery to cover the front buckets and rear seat.*NOTE* This product will take 6 - 8 weeks for delivery.
Availability: Special Order, Ships Direct from Supplier
Item #: 14549 -
Upholstery components have an ETA of 5 - 9 weeks.Door Tag Trim Code: FA. White XR7 Vinyl upholstery to cover the front buckets and rear seat.*NOTE* This product will take 4 – 6 weeks for delivery.
Availability: Special Order, Ships Direct from Supplier
Item #: 14387 -
Upholstery components have an ETA of 5 - 9 weeks.Door Tag Trim Code: 6B. Medium Blue XR7 vinyl upholstery kit the cover the front buckets.*NOTE* This product will take 4 – 6 weeks for delivery.
Availability: Special Order, Ships Direct from Supplier
Item #: 14392 -
Upholstery components have an ETA of 5 - 9 weeks.Door Tag Trim Code: 6A. Black XR7 vinyl upholstery kit to cover the front buckets.*NOTE* This product will take 4 – 6 weeks for delivery.
Availability: Special Order, Ships Direct from Supplier
Item #: 14395 -
Upholstery components have an ETA of 5 - 9 weeks.Door Tag Trim Code: 6D. Dark Red XR7 vinyl upholstery kit to cover the front buckets.*NOTE* This product will take 4 – 6 weeks for delivery.
Availability: Special Order, Ships Direct from Supplier
Item #: 14544 -
Upholstery components have an ETA of 5 - 9 weeks.Door Tag trim Code: 6F. Medium Brown XR7 vinyl upholstery kit to cover the front buckets.*NOTE* This product will take 4 – 6 weeks for delivery.
Availability: Special Order, Ships Direct from Supplier
Item #: 14556 -
Upholstery components have an ETA of 5 - 9 weeks.Door Tag trim Code: 6G Medium Green XR7 vinyl upholstery to cover the front buckets.*NOTE* This product will take 4 – 6 weeks for delivery.
Availability: Special Order, Ships Direct from Supplier
Item #: 14385 -
Upholstery components have an ETA of 5 - 9 weeks.Door Tag Trim Code: 6A. Black XR7 Vinyl Upholstery kit to cover the rear seat for the convertible.*NOTE* This product will take 4 – 6 weeks for delivery.
Availability: Special Order, Ships Direct from Supplier
Item #: 14396 -
Upholstery components have an ETA of 5 - 9 weeks.Door Tag Trim Code: 6D. Dark Red XR7 vinyl upholstery kit to cover the rear seat for the convertible.*NOTE* This product will take 4 – 6 weeks for delivery.
Availability: Special Order, Ships Direct from Supplier
Item #: 14545 -
Upholstery components have an ETA of 5 - 9 weeks.Door Tag Trim Code: 6F. Medium Brown XR7 vinyl upholstery kit to cover the rear seat.*NOTE* This product will take 4 – 6 weeks for delivery.
Availability: Special Order, Ships Direct from Supplier
Item #: 14390 -
Upholstery components have an ETA of 5 - 9 weeks.Door Tag Trim Code: 6B. Medium Blue XR7 vinyl upholstery to cover the rear seat.*NOTE* This product will take 4 – 6 weeks for delivery.
Availability: Special Order, Ships Direct from Supplier
Item #: 14551 -
Upholstery components have an ETA of 5 - 9 weeks.Door Tag Trim Code: FA. White XR7 Vinyl Upholstery to cover the rear seat.*NOTE* This product will take 4 – 6 weeks for delivery.
Availability: Special Order, Ships Direct from Supplier
Item #: 14559 -
Upholstery components have an ETA of 5 - 9 weeks.Door Tag Trim Code: 6G. Medium Green XR7 vinyl upholstery to cover the rear seat.*NOTE* This product will take 4 – 6 weeks for delivery.
Availability: Special Order, Ships Direct from Supplier
Item #: 14384 -
Upholstery components have an ETA of 5 - 9 weeks.Door Tag Trim Code: 6A. Black XR7 Vinyl Upholstery kit to cover the Front Buckets and rear seat.*NOTE* This product will take 4 – 6 weeks for delivery.
Availability: Special Order, Ships Direct from Supplier
Item #: 14394 -
Upholstery components have an ETA of 5 - 9 weeks.Door Tag Trim Code: 6D. Dark Red XR7 vinyl upholstery kit to cover the front buckets and rear seat for the coupe.*NOTE* This product will take 6 - 8 weeks for delivery.
Availability: Special Order, Ships Direct from Supplier
Item #: 14542 -
Upholstery components have an ETA of 5 - 9 weeks.Door Tag Trim Code: 6F. Medium Brown XR7 vinyl upholstery kit to cover the front buckets and rear seat for the coupe.*NOTE* This product will take 6 - 8 weeks for delivery.
Availability: Special Order, Ships Direct from Supplier
Item #: 14548 -
Upholstery components have an ETA of 5 - 9 weeks.Door Tag Trim Code: FA. White XR7 upholstery kit to cover the front buckets and rear seat.*NOTE* This product will take 4 – 6 weeks for delivery.
Availability: Special Order, Ships Direct from Supplier
Item #: 14389 -
Upholstery components have an ETA of 5 - 9 weeks.Door Tag Trim Code: 6B. Medium Blue XR7 vinyl upholstery to cover the front buckets and rear seat.*NOTE* This product will take 4 – 6 weeks for delivery.
Availability: Special Order, Ships Direct from Supplier
Item #: 14560 -
Upholstery components have an ETA of 5 - 9 weeks.Door Tag Trim Code: 6G. Green XR7 vinyl upholstery to cover the front buckets and rear seat.*NOTE* This product will take 4 – 6 weeks for delivery.
Availability: Special Order, Ships Direct from Supplier
Item #: 14386 -
Upholstery components have an ETA of 5 - 9 weeks.Door Tag Trim Code: 6A. Black XR7 vinyl upholstery kit to cover the rear seat for the coupe.*NOTE* This product will take 4 – 6 weeks for delivery.
Availability: Special Order, Ships Direct from Supplier
Item #: 14397 -
Upholstery components have an ETA of 5 - 9 weeks.Door tag Trim Code: 6D. Dark Red XR7 vinyl upholstery kit to cover the rear sear for the coupe.*NOTE* This product will take 4 – 6 weeks for delivery.
Availability: Special Order, Ships Direct from Supplier
Item #: 14546 -
Upholstery components have an ETA of 5 - 9 weeks.Door Tag Trim Code: 6F. Medium Brown XR7 Upholstery to cover the rear seat in the coupe.*NOTE* This product will take 4 – 6 weeks for delivery.
Availability: Special Order, Ships Direct from Supplier
Item #: 14391 -
Upholstery components have an ETA of 5 - 9 weeks.Door Tag Trim Code: 6B. Medium Blue vinyl upholstery to cover the rear seat.*NOTE* This product will take 4 – 6 weeks for delivery.
Availability: Special Order, Ships Direct from Supplier
Item #: 14550 -
Upholstery components have an ETA of 5 - 9 weeks.Door Tag Trim Code: FA. White XR7 Vinyl upholstery to cover the rear seat.*NOTE* This product will take 4 – 6 weeks for delivery.
Availability: Special Order, Ships Direct from Supplier
Item #: 14558 -
Upholstery components have an ETA of 5 - 9 weeks.Door Tag Trim Code: 6G. Medium Green XR7 vinyl upholstery to cover the rear seat.*NOTE* This product will take 4 – 6 weeks for delivery.
Availability: In-Stock Item
Item #: 13720 -
Reproduction high pressure hose that goes from the control valve to ram cylinder for the Mercury Cougar or Ford Mustang. Ford updated this hose for the 1970 model year and uses the same part number as the early hoses, but with a double crimp. This unit features all of the correct ribbing, striping and crimping. Hose with 5/16 fittings used 1970 Mercury and Ford.*NOTE* Two different hoses attach between the control valve and the ram cylinder, PS7U8B and PS4U8A.Replaces Ford part...
Availability: In-Stock Item
Item #: 13719 -
Reproduction high pressure hose that goes from the ram cylinder to control valve for the Mercury Cougar or Ford Mustang. Ford updated this hose for the 1970 model year and it uses the same part number as the early hoses, but with a double crimp. This unit features all of the correct ribbing, striping and crimping. Hose with 5/16 fittings used 1970 Mercury and Ford. *NOTE* Two different hoses attach between the control valve and the ram cylinder, PS7U8B and PS4U8A. Replaces Ford part...