Home > 1973 Mercury Cougar
All Available Parts - 1973 Mercury Cougar
Products (Click sub-categories above to ONLY display results for that Sub-Category) 701-800 of 3317
Sorted By:
Availability:
Display Options:
Availability: Used / Wrecking Yard Item
Item #: 27563 -
These B grade headlight doors will have some pitting in the chrome. Some of them will be nearly pit free, but may have a small crack. Click onto the image to enlarge the picture.Replaces Ford part number D3WB-13052 and D3WY-13064-A.
Availability: In-Stock Item
Item #: 41349 -
1967-68 XR7 over head console pad clip. Two needed per car. Sold individually # C3AB-63519A16
Availability: Used / Wrecking Yard Item
Item #: 16127 -
Used grade "B" driver side (left hand) vertical glass trim window glass for the Mercury Cougar or Ford Mustang coupe or convertible. This stainless steel trim will have light scuffing or scratches, primarily on the outside surface. Plan on purchasing new rubber weather stripping. Will not fit Mustang fastback (Sport Roof) models. Ford part @ D1ZZ-6529953-A.
Availability: In-Stock Item
Item #: 19469 -
Complete kit with 12 white plastic mounting clips, 2 black plastic mounting brackets that attach rocker mouldings to scoops, 2 aluminum rocker mouldings and 2 chrome plated scoops.
Due to supplier shortage, the metal rocker panel clips are not available at this time. Click Here to View Installation Instructions These are correct for 1969 only but can be used on any year 1967-1973 ...
Availability: In-Stock Item
Item #: 10580 -
Reproduction rocker moulding / trim end clip for the Mercury Cougar. This clip is a steel clip with a wire like the original. These units are technically for the 1969 and 1970 Cougar, but they will also work well with the 1968 rocker moulding / trim. Four of these clips were used on all 1969 Cougars except for the Sport Special which used two. The 1970 Cougar also uses two per car. Sold individually.Will work on 71-3 with modification. ...
Availability: Used / Wrecking Yard Item
Item #: 19648 -
This is the stainless steel trim for the front of the boot that attaches to the upper, back side of the back seat in a 1971 to 1973 Cougar and Ford Mustang. This is a very hard part to come by in good shape.
Availability: Used / Wrecking Yard Item
Item #: 31782 -
Used driver side, front drip rail moulding for any 1971-73 Mercury Cougar hard top Coupe. A total of 3 pieces per side slip together to form the entire drip rail system on a 1971-73 Cougar. This is only the A pillar front piece by itself. Bear in mind that these parts are made from aluminum and were originally anodized to give the polished stainless steel look. Very prone to scratches and dents. This part will be 'driver quality used'. Dented and badly scratched core grade trim parts...
Availability: Used / Wrecking Yard Item
Item #: 31783 -
Used passenger side, front drip rail moulding for any 1971-73 Mercury Cougar hard top Coupe. A total of 3 pieces per side slip together to form the entire drip rail system on a 1971-73 Cougar. This is only the A pillar front piece by itself. Bear in mind that these parts are made from aluminum and were originally anodized to give the polished stainless steel look. Very prone to scratches and dents. This part will be 'driver quality used'. Dented and badly scratched core grade trim...
Availability: In-Stock Item
Item #: 12434 -
Restored passenger side (right hand) quarter window moulding / trim for the XR7 Mercury Cougar. These are correct for the coupe only. Correctly restored and re-anodized.
Availability: Used / Wrecking Yard Item
Item #: 15810 -
Used passenger side (right hand) grade B vertical glass trim for the window glass of the Mercury Cougar or Ford Mustang both coupe and convertible. This stainless steel trim will have light scuffing or scratches, primarily on the outside surface. Plan on purchasing new rubber weather stripping. Will not fit Mustang fastback (Sport Roof) models.Ford part # D1ZZ-6529952-A.
Availability: In-Stock Item
Item #: 10136 -
Restored 6 piece vinyl top moulding / trim set for the Mercury Cougar equipped with the full vinyl top. You could have gotten your 1971-3 Cougar with either a full or half vinyl top and the moulding trim set for each is very different. This full top set has 6 pieces where the half top set is only 2 pieces. While this moulding / trim is restored, you will need to paint the detail stripe semi-gloss black yourself. *RESTORATION TIP* You will need a can of good quality semi-gloss black...
Availability: In-Stock Item
Item #: 16159 -
New pan head screws for installing the tail light bezel on any 1971-73 Mercury Cougar. Sold individually, a total of 16 are used to install the brake light bezels (8 per side). #8 black pan head Phillips screw 1-1/2 inches long. Replaces Ford part number 56001-S.
Availability: In-Stock Item
Item #: 11198 -
Used half vinyl top roof trim from a 1971-73 Mercury Cougar for the driver side. Half vinyl top option was a partial covered vinyl roof starting at the windshield and extending rearwards past mid-way on the roof. Not to be confused with the complete vinyl roof covering trim. These have been restored with the correct bright dipped, anodize finish. This is a trim restoration service, if you do not have an acceptable core trim piece, please purchase a core driver vinyl half roof trim. Call...
Availability: In-Stock Item
Item #: 11199 -
Used half vinyl top roof trim from a 1971-73 Mercury Cougar for the passenger side. Half vinyl top option was a partial covered vinyl roof starting at the windshield and extending rearwards past mid-way on the roof. Not to be confused with the complete vinyl roof covering trim. These have been restored with the correct bright dipped, anodize finish. This is a trim restoration service, if you do not have an acceptable core trim piece, please purchase a core passenger vinyl half roof trim. Call...
Availability: In-Stock Item
Item #: 11839 -
NOTE: Some modification required to fit Cougars!This is the wheel lip mouldings for the 1969 Mustang. With very slight modifications (drilling extra holes, will not lineup with factory holes) they can be made to fit your 1971 - 1973 Mercury Cougar.
Availability: In-Stock Item
Item #: 11838 -
NOTE: Some modification required to fit Cougars!This is the wheel lip mouldings for the 1969 Mustang. With very slight modifications they can be made to fit your 1971 - 1973 Mercury Cougar.
Availability: In-Stock Item
Item #: 11841 -
NOTE: Some modification required to fit Cougars!This is the wheel lip mouldings for the 1969 Mustang. With very slight modifications (drilling extra holes) they can be made to fit your 1971 - 1973 Mercury Cougar.
Availability: Rare / NOS Part
Item #: 42386 -
Rear passenger side wheel lip moulding. Keep in mind we will take a restorable core moulding in partial trade on this very hard to find part.Replaces Ford part number D1WY-6529164-A.
Availability: Rare / NOS Part
Item #: 42385 -
Front driver side wheel lip moulding. Fits all 1971-73 Mercury Cougars.Replaces Ford part number D1WY-16039-A.
Availability: In-Stock Item
Item #: 11840 -
NOTE: Some modification required to fit Cougars!This is the wheel lip mouldings for the 1969 Mustang. With very slight modifications (drilling extra holes) they can be made to fit your 1971 - 1973 Mercury Cougar.
Availability: Used / Wrecking Yard Item
Item #: 18720 -
Front driver side wheel lip moulding. Because these pieces are original pieces, they will have far superior fit when compared to "offshore" reproductions. These are used pieces and will be showing only minor dents, dings, dullness, or scratches. These pieces are also an excellent option for those of you who like to restore your parts yourself.*Note - This is a core exchange item only, trim will not ship until your acceptable moulding core is received by WCCC. Why do we require cores be sent...
Availability: Used / Wrecking Yard Item
Item #: 18721 -
Rear passenger side wheel lip moulding. Because these pieces are original pieces, they will have far superior fit when compared to "offshore" reproductions that do not fit correctly. These are used pieces and will be showing only minor dents, dings, dullness, or scratches. These pieces are also an excellent option for those of you who like to restore your parts yourself. Due to the difficulty in obtaining trim we no longer sell these without first having you send us your cores. Click on images...
Availability: Used / Wrecking Yard Item
Item #: 18718 -
Front passenger side wheel lip moulding that has been lovingly restored to a better than new condition. Far superior fit and finish when compared to "offshore" reproductions. Due to the difficulty in obtaining trim we no longer sell these without first having you send us your cores. Click on images to enlarge. ...
Availability: Used / Wrecking Yard Item
Item #: 18723 -
Because these pieces are original pieces, they will have far superior fit when compared to "offshore" reproductions that do not fit correctly. These are used pieces and will be showing only minor dents, dings, dullness, or scratches. These pieces are also an excellent option for those of you who like to restore your parts yourself.Due to the difficulty in obtaining trim we no longer sell these without first having you send us your cores. Click on images to enlarge. ...
Availability: In-Stock Item
Item #: 20501 -
This set of four wheel lip moldings is sold on an exchange basis. We would require your cores be in hand before we ship restored mouldings. If you have extra cores you would like to sell then we would like to hear from you! Please do not send heavily damaged trim parts as the finished product will be delicately thin. Extra screw holes and elongated holes are OK but you will be getting a like product in exchange. We are happy to send your cores in for restoration and make sure you get your...
Availability: In-Stock Item
Item #: 11517 -
Restored four piece aluminum rear window moulding / trim set correctly restored with an anodized and a bright dip finish and polished to a very high luster.Ford part #s D1ZZ-6542405-A, D1ZZ-6542404-A, D1ZZ-6542430-A, D1ZZ-6542431-A.
Availability: Used / Wrecking Yard Item
Item #: 11518 -
Good used four piece aluminum rear window moulding / trim set with some dings and or minor scratches. Ready to install on your Cougar as is, or polish them to be installed on a daily driver. These original FoMoCo mouldings are far superior to the off shore reproductions that do not fit well and have an incorrect color to them. Ford part #s D1ZZ-6542405-A driver side (left hand) lower, D1ZZ-6542404-A passenger side (right hand) lower, D1ZZ-6542430-A passenger side upper, and D1ZZ-6542431-A...
Availability: Used / Wrecking Yard Item
Item #: 11519 -
Our used passenger (right hand) side upper rear aluminum window mouldings / trim will have light scratches and minor dings. These are suitable for restoration or for a lower quality daily driver. We will not send you kinked or gouged trim as it is not feasible to restore heavily damaged trim. Ford part # D1ZZ-6542430-A.
Availability: Used / Wrecking Yard Item
Item #: 11520 -
Our used passenger (right hand) side lower rear aluminum window mouldings / trim will have light scratches and minor dings. These are suitable for restoration or for a lower quality daily driver. We will not send you kinked or gouged trim as it is not feasible to restore heavily damaged trim. Ford part # D1ZZ-6542404-A.
Availability: Used / Wrecking Yard Item
Item #: 11521 -
Our used driver (left hand) upper rear aluminum window mouldings / trim will have light scratches and minor dings. These are suitable for restoration or for a lower quality daily driver. We will not send you kinked or gouged trim as it is not feasible to restore heavily damaged trim. Ford part # D1ZZ-6542430-A. ...
Availability: Used / Wrecking Yard Item
Item #: 11522 -
Our used driver (left hand) lower rear aluminum window mouldings / trim will have light scratches and minor dings. These are suitable for restoration or for a lower quality daily driver. We will not send you kinked or gouged trim as it is not feasible to restore heavily damaged trim. Ford part # D1ZZ-6542430-A.
Availability: Used / Wrecking Yard Item
Item #: 13098 -
Used driver side (left hand) windshield moulding / trim for the Mercury Cougar or Ford Mustang coupe. The bright dip anodize has worn off of this unit and it may have some very fine scratches, but will not be dented or have any heavy scratching. Suitable for your daily driver or for restoration. Ford part # D1ZZ-6503145-A.
Availability: Restored / Remanufactured
Item #: 31935 -
Restored driver (left hand) side upper headlight housing moulding for any 1973 Mercury Cougar. We also have grade A and B used mouldings. Refundable core charge additional.Like all of our rechromed parts, if you have exceptionally clean cores and have high standards you will want to send your cores in advance. When you do we will do what we call "core matching". If you send in parts with ZERO pits you will get back restored parts that had no pits prior to replating. If you pay the core...
Availability: Used / Wrecking Yard Item
Item #: 31142 -
Used upper rear bumper bracket for any 1973 Mercury Cougars. Right and left are the same, two needed per car. Ford part number D3WY-17A750-A.
Availability: Rare / NOS Part
Item #: 32102 -
New Old Stock driver side bumper filler. These 73 side fillers are made of a rubber material as opposed to plastic like the 71-72. 1973 is also different than 71-72 in that 1973 brought about new federal crash requirements. The 73 model has the bumper spaced further out which makes all three of the rear bumper fillers wider. 1973 has longer rear bumper brackets than 1971-72. Mercury master part number D3WY-17C838-A, also called a deflector, would be painted body color.
Availability: Used / Wrecking Yard Item
Item #: 32944 -
License to rear bumper spacer used on all 1973 Cougars. Usually this item is badly cracked or missing. This is a show quality used part for those that are concerned about less than obvious detail items.NOTE: The difference between the 71-72 version and this 73 version is that the 73 did not have a casting number and the earlier year versions did.
Availability: Used / Wrecking Yard Item
Item #: 13070 -
Used driver side (left hand) bumper guard for the Mercury Cougar. The chrome platting was pretty low quality back in the day and this unit will have some scratches and pitting in the chrome. Will not come with rubber bumper guard pad, pad sold separately. Ford part # D3WY-17797-A for the driver side. Keep in mind we are always in need of: 69 Front Bumper Cores70 Front Bumper Cores1971 - 1972 Front without Bumper Guard Holes1973 Front Bumper Cores without the holes for the horizontal black...
Availability: In-Stock Item
Item #: 21602 -
Aftermarket clip for attaching the long black plastic rear bumper filler on any 1971-73 Mercury Cougar. A total of 8 clips are needed to attach the rear bumper filler. Most have either broken with age, or have broken during the removal of the filler. Sold individually.
Availability: In-Stock Item
Item #: 18719 -
Front driver side wheel lip moulding that has been lovingly restored to a better than new condition. Far superior fit and finish when compared to "offshore" reproductions. Due to the difficulty in obtaining trim we no longer sell these without first having you send us your RESTORABLE cores.
Availability: In-Stock Item
Item #: 18717 -
Front passenger side wheel lip moulding that has been lovingly restored to a better than new condition. Far superior fit and finish when compared to "offshore" reproductions. Due to the difficulty in obtaining trim we no longer sell these without first having you send us your RESTORABLE cores. Do you have questions about your cores trim pieces? This video should help! ...
Availability: In-Stock Item
Item #: 18722 -
Rear driver side wheel lip moulding that has been lovingly restored to a better than new condition. Far superior fit and finish when compared to "offshore" reproductions. Due to the difficulty in obtaining trim we no longer sell these without first having you send us your RESTORABLE cores. ...
Availability: In-Stock Item
Item #: 25371 -
Rear passenger side wheel lip moulding that has been lovingly restored to a better than new condition. Far superior fit and finish when compared to "offshore" reproductions. Due to the difficulty in obtaining trim we no longer sell these without first having you send us your RESTORABLE cores.
Availability: In-Stock Item
Item #: 42515 -
These bumpers are re-chromed using the triple plating process. This produces a significantly higher quality finished product because they have a layer of copper, nickel and chrome. It is well worth the hassle and expense by paying a little extra now rather than changing out your bumpers out again in one to five years because the chrome is beginning to deteriorate. For years now, many of the nations top honor Cougar's have worn our bumpers. These have a two year warranty, double that of most of...
Availability: Rare / NOS Part
Item #: 30441 -
1973 Mercury Cougar plastic top license plate bracket. This mounts to the bumper beam and the top most portion sticks through the window of the bumper. This top bracket holds the top section of the license plate in the lip. Very hard to find, delicate one year only. Ford part # D3WY-17A385-B
Availability: In-Stock Item
Item #: 27469 -
Correct size and style white square plastic insert that clips onto front or rear license plate bracket on any 1967-73 Mercury Cougar. Each kit allows one license plate to be mounted. The actual screw has a large head which is made for license plates, but is not the factory Ford style of fastener for Concours judged cars. We also sell an accepted original style of screw, see item 8286.
Availability: Used / Wrecking Yard Item
Item #: 15732 -
One year only passenger side (right hand) bracket that attaches the beam to the frame. You will notice a big difference in quality from our Western parts that have never seen salt compared to those that have been subject to road salt. Ford called these parts isolator assembly arms. Ford part # D3WY-17C882-A.
Availability: In-Stock Item
Item #: 16136 -
New black plastic retainer for attaching the front license plate bracket to the bumper beam on all 1973 Mercury Cougar. Two total needed for installing the lower license plate bracket. These "T" shaped retainers very closely resemble the originals. *Note - These are included with the purchase of our used front license plate bracket.
Availability: Used / Wrecking Yard Item
Item #: 13673 -
Used passenger side (right hand) bumper guard for the Mercury Cougar. The chrome platting was pretty low quality back in the day and this unit will have some scratches and pitting in the chrome. Will not come with rubber bumper guard pad, pad sold separately. Ford part # D3WY-17796-A for the passenger side. Keep in mind we are always in need of: 69 Front Bumper Cores70 Front Bumper Cores1971 - 1972 Front without Bumper Guard Holes1973 Front Bumper Cores without the holes for the...
Availability: In-Stock Item
Item #: 42505 -
This option includes paying a core charge. By choosing this option, the re-chromed item you receive will have started the re-chroming process as an average quality core.We highly recommend that you send us your core first. Here's why: We can core match your bumper guards. Bumpers guards that are re-chromed using a superior quality core are always reserved for core matching. If your core is average or below average, you may be able to pay to upgrade to a re-chromed bumper that started the...
Availability: In-Stock Item
Item #: 42506 -
This options includes the core charge, but there are advantages of sending cores in advance:Advantages of Pre-Sending Cores: - We core match your Bumper Guards. We recommend you pre-sending your core if you have a good quality core, as our A grade Bumper Guards are always reserved for core matching. If your core is not a grade A core, you may be able to pay a charge to upgrade to a higher grade re-chromed Bumper Guards.- Ships after we receive and inspect your Bumper Guards core, avoiding...
Availability: In-Stock Item
Item #: 14-0017 -
Many of our customers have asked and requested how we clean and detail our parts. We use a combination of items, mostly fine steel wool and elbow grease. Cleans haze, crud, and years of oxidation and water spots from glass, aluminum, chrome, and rubber. 16 individual pads in a package.
Availability: Used / Wrecking Yard Item
Item #: 11255 -
Complete five piece set includes the horizontal support as well as the two braces inside the trunk, two brackets that bolt to the bumper and hardware. Checked closely for bends, cracks and stripped threads. What is pictured is the best of what we have, we also have. These B grade sets will clean up, but have some slight surface rust. Pair of inside the trunk bumper mounting brackets D3WY-17A750-A. Passenger side bumper bracket D3WY-17787-A, driver side bumper bracket D3WY-17788-A. Rear bumper...
Availability: In-Stock Item
Item #: 42514 -
This option includes paying a core charge. By choosing this option, the re-chromed bumper you receive will have started the re-chroming process as an average quality core. We highly recommend that you send us your core first. Here's why: We can core match your bumper. Bumpers that are re-chromed using a superior quality core are always reserved for core matching. If your core is average or below average, you may be able to pay to upgrade to a re-chromed bumper that started the re-chroming...
Availability: Used / Wrecking Yard Item
Item #: 23331 -
1973 Mercury Cougar top, plastic license plate bracket. This mounts to the bumper beam and the top most portion sticks through the window of the bumper. This top bracket holds the top section of the license plate in the lip.
Availability: In-Stock Item
Item #: 14052 -
This is a complete bumper bolt kit for front and rear.Please know that chrome cracking from the installation of bumper bolts on our rechromed bumpers is not covered under warranty. We have observed that some reproduction wavy washers are of a thicker material than original and require more torque to flatten out properly for a good fit. We suggest that no matter what thickness your repro wavy washer is that you flatten them out in a vise prior to installation so as not to have to apply as much...
Availability: In-Stock Item
Item #: 14099 -
This part is what holds on 1969 - 1973 Mercury Cougar / Ford Mustang Rear License Lamp Lens. Replaces Ford part # C5OZ-13566-B or C4AZ-13564-A.
Availability: In-Stock Item
Item #: 12612 -
These bumpers are re-chromed using the triple plating process. This produces a significantly higher quality finished product because they have a layer of copper, nickel and chrome. It is well worth the hassle and expense by paying a little extra now rather than changing out your bumpers out again in one to five years because the chrome is beginning to deteriorate. For years now, many of the nations top honor Cougar's have worn our bumpers.Please know that chrome cracking from the installation...
Availability: Used / Wrecking Yard Item
Item #: 25352 -
D1WY-17A914-A Rear bumper center beam, mounts on top of the bumper brackets behind the rear bumper.
Availability: Used / Wrecking Yard Item
Item #: 25586 -
Used passenger side (right hand) lower rear bumper bracket for any model of 1973 Mercury Cougar.Ford part # D3WY-17787-A.
Availability: Used / Wrecking Yard Item
Item #: 25587 -
Used driver side (left hand) lower rear bumper bracket for any model of the 1973 Mercury Cougar. D3WY-17787-A *NOTE* The pictures showing the bracket installed are of the passenger side and are for mounting reference.
Availability: Used / Wrecking Yard Item
Item #: 23741 -
Black plastic filler that attaches to the rear of the stone guard. Fills in the portion between the stone guard and headlights. 1973 passenger side only.
Availability: Used / Wrecking Yard Item
Item #: 23740 -
Black plastic filler that attaches to the rear of the stone guard. Fills in the portion between the stone guard and headlights. 1973 driver side only.
Availability: Used / Wrecking Yard Item
Item #: 13471 -
17A385 Front license plate mounting bracket, fastens to the center of a 1973 Mercury Cougar front bumper. Bottom steel bracket only.
Availability: Used / Wrecking Yard Item
Item #: 25589 -
D3WY-17C760-A Rubber insulator that fits along the front edge of the stone deflector. We call it an anti rattle bumper, there are a total of 6 of these used on the 1973 Cougar stone deflector. Sold individually.
Availability: Used / Wrecking Yard Item
Item #: 25583 -
Rubberized bumper filler combination stone deflector, that mounts on the passenger side fender on a 1973 Cougar. This unit is also known as a bumper filler, rock guard, or filler panel. Grade A used condition, may have a defect that can't be seen when installed.Replaces Ford part number D3WY-17779-A.
Featured!
Availability: In-Stock Item
Item #: 12140 -
NOTE: Some modification required to fit Cougars! These are actually 69-70 Mustang wheel lip mouldings, which have a different shape / contour. However, with a bit of massaging they can be made to fit the 71 - 73 Cougar. They are the closest alternative we have found that fits and looks reasonably good for much less than restored originals. Check out our video below, showing how easy it is to install these mouldings on a Cougar ...
Availability: Used / Wrecking Yard Item
Item #: 25588 -
D3WY-17A820-A This is one of the end brackets that mounts the outer bumper shell to the bumper beam. "L" shaped bracket, most have a stamped number of 4928A01 on them. Sold individually, 2 needed per bumper.
Availability: Used / Wrecking Yard Item
Item #: 18955 -
One year only beam that is very prone to rust due to the fact that they were not painted from the factory. Mercury master part number D3WY-17A792-A, also called the front bumper reinforcement beam.
Availability: Used / Wrecking Yard Item
Item #: 19773 -
Rear bumper filler for any 1973 Mercury Cougar.No chips or cracks. Does not come with fasteners or clips.See related items for new aftermarket style clips for attaching, 8 total are needed.Replaces Ford part number D3WY-17808-A .* Note - Will not fit 1971-72 Mercury Cougar.
Availability: Used / Wrecking Yard Item
Item #: 19774 -
These 73 side fillers are made of a rubber material as opposed to plastic like the 71-72. 1973 is also different than 71-72 in that 1973 brought about new federal crash requirements. The 73 model has the bumper spaced further out which makes all three of the rear bumper fillers wider. 1973 has longer rear bumper brackets than 1971-72. Mercury master part number D3WY-17C837-A, also called a deflector, would be painted body color.
Availability: Used / Wrecking Yard Item
Item #: 19768 -
These 73 side fillers are made of a rubber material as opposed to plastic like the 71-72. 1973 is also different than 71-72 in that 1973 brought about new federal crash requirements. The 73 model has the bumper spaced further out which makes all three of the rear bumper fillers wider. 1973 has longer rear bumper brackets than 1971-72. Mercury master part number D3WY-17C838-A, also called a deflector, would be painted body color.
Availability: In-Stock Item
Item #: 41745 -
This bumper bolt is sold individually and replaces Ford part # C4ZB-17758-A. It features the correct "button" head profile covered in stainless steel. Silver zinc with wax coating to extend plating life. Reduced shoulder height allows the nut to seat properly.Please know that chrome cracking from the installation of bumper bolts on our rechromed bumpers is not covered under warranty. We have observed that some reproduction wavy washers are of a thicker material than original and require more...
Availability: In-Stock Item
Item #: 41746 -
Bumper bolt wavy washer sold individually. Also available in our bumper bolt kit.Please know that chrome cracking from the installation of bumper bolts on our rechromed bumpers is not covered under warranty. We have observed that some reproduction wavy washers are of a thicker material than original and require more torque to flatten out properly for a good fit. We suggest that no matter what thickness your repro wavy washer is that you flatten them out in a vise prior to installation so as...
Availability: In-Stock Item
Item #: 41744 -
Bumper bolt nuts sold individually. Also available in our bumper bolt kit.Please know that chrome cracking from the installation of bumper bolts on our rechromed bumpers is not covered under warranty. We have observed that some reproduction wavy washers are of a thicker material than original and require more torque to flatten out properly for a good fit. We suggest that no matter what thickness your repro wavy washer is that you flatten them out in a vise prior to installation so as not to...
Availability: In-Stock Item
Item #: 41309 -
Availability: In-Stock Item
Item #: 13912 -
This is a Mustang kit and it includes 4 screws, 2 metal nuts, 2 self-threading plastic nuts and 2 anti-rattle bumpers as pictured.For Cougar, you need this kit plus 2 more plastic nuts, found here.
Availability: Used / Wrecking Yard Item
Item #: 19761 -
One year only driver side (left hand) bracket that attaches the beam to the frame. You will notice a big difference in quality from our Western parts that have never seen salt compared to those that have been subject to road salt. Ford called these parts isolator assembly arms. Ford part # D3WY-17C883-A.
Availability: In-Stock Item
Item #: 26400 -
This decal was available in both red and purple and both decals have the same Ford part number on them with the purple decal being slightly larger with more defined text. This is the purple version.Decal reads:Ford Dearborn, Mich. Air Conditioner Maximum Operating Charge 4LBS. 8OZ. of R-12 Complies With SAE-J639 Replaces part # D20E-19A688-AB
Availability: In-Stock Item
Item #: 26382 -
Available in Red and Purple. Both the red and the purple decals have the same Ford part number on them. The purple is a slightly larger decal, with more defined text. Decal reads:
Ford Dearborn, Mich. Air Conditioner
Maximum Operating Charge
4LBS. 8OZ. of R-12
Complies With SAE-J639
D20E-19A688-AB
Availability: In-Stock Item
Item #: 26283 -
Decal reads:
Ford Dearborn, Mich. Air Conditioner
Maximum Operating Charge
1LBS. 12OZ. of R-12
Complies With SAE-J639
D1ZA-19A688-AC
Availability: In-Stock Item
Item #: 26421 -
This is a reproduction of the original service instruction decal that was located on the side of the air cleaner.Fits the following models:1967 Mercury Cougar1968 Mercury Cougar1969 Mercury Cougar1970 Mercury Cougar1967 Ford Mustang1968 Ford Mustang1969 Ford Mustang1970 Ford Mustang ...
Availability: In-Stock Item
Item #: 26254 -
This is a reproduction of the original decal that contains the word "FRONT" that was located on the front of the air cleaner.Fits the following models 1967 Mercury Cougar1968 Mercury Cougar1969 Mercury Cougar1970 Mercury Cougar1971 Mercury Cougar1972 Mercury Cougar1973 Mercury Cougar 1967 Ford Mustang1968 Ford Mustang1969 Ford Mustang1970 Ford Mustang1971 Ford Mustang1972 Ford Mustang1973 Ford Mustang ...
Availability: In-Stock Item
Item #: 26383 -
This is a reproduction of the original white engine displacement decal with a blue background Powered by Ford (logo) followed by 351-4V Regular Fuel followed by white background with blue lettering, Once a Month, Crankcase Ventilation System, Cooling System Flush, and a Motorcraft, Autolite parts logo. located on the top of the air cleaner. *Note - Will not fit 1968-72 air cleaner lids that are 18 inches in diameter.Fits the following models with a 351 4 barrel engine : 1973 Cougar1973 Mustang ...
Availability: In-Stock Item
Item #: 31684 -
This is a reproduction of the original white engine displacement decal with a blue background Powered by Ford (logo) followed by 351-2V Regular Fuel followed by white background with blue lettering, Once a Month, Crankcase Ventilation System, Cooling System Flush, and a Motorcraft, Autolite parts logo. Located on the top of the air cleaner. Fits the following models with a 351 2 barrel Regular Fuel engine: 1973 Cougar 1973 Mustang ...
Availability: In-Stock Item
Item #: 26266 -
Reproduction 351 4V MT Emission (After 1-1-73) for the 1973 Mercury cougar / Ford Mustang
Availability: In-Stock Item
Item #: 26267 -
Reproduction 351 4V AT / MT Emission (Before 1-73) for the 1973 Mercury Cougar / Ford Mustang
Availability: In-Stock Item
Item #: 26418 -
Replaces Ford Part #: D3AE-9C485-AFA
Availability: In-Stock Item
Item #: 26414 -
Engine code decal for the 351 with a 2 barrel carburetor and air conditioning.Stamped with engine code K604CG.
Availability: In-Stock Item
Item #: 26346 -
This decal goes on the tire jack itself.
Availability: In-Stock Item
Item #: 26250 -
Reproduction Space Save Tire Instructions Decal for the 1968 - 1973 Mercury Cougar / Ford Mustang
Availability: In-Stock Item
Item #: 26269 -
Reproduction Jack Instructions Decal for the 1971 - 1973 Mercury Cougar
Availability: In-Stock Item
Item #: 26344 -
Replaces Ford part #: D1ZB-17093-CE
Availability: In-Stock Item
Item #: 26355 -
The decal I most often see on the 1971-1973 Cougar is the used one pictured here. Will be trying to locate this decal soon.
Availability: In-Stock Item
Item #: 26308 -
Reproduction Detroit Locker Glove Box Decal for the 1967, 1968, 1969, 1970, 1971, 1972 and 1973 Mercury Cougar
Availability: In-Stock Item
Item #: 26302 -
Reproduction Convertible Top Utica Plant Decal for the 1970 - 1973 Mercury Cougar or Ford Mustang
Availability: In-Stock Item
Item #: 26351 -
This is an accurate reproduction of the tie down notice decal that was placed on the rear license plate frame. This was to remind dealers to remove the tie down plates that were used to secure the cars to the transport trains / trucks on their way from the factory to the dealers. Ford wanted to recycle these plates to save money, but dealers often didn't feel it was worth their time to remove the plates. Thus, many cars still have them. Check yours out! ...
Availability: In-Stock Item
Item #: 26442 -
Controversy abounds on which shrouds received these and which did not. It is our understanding that no early Cougars came from the factory with this decal installed. This decal first surfaced when Ford had major problems with their flex fans in the early 1970's. We will let you decide if it is correct for your application... This is placed on the top, center of the fan shroud.
Availability: In-Stock Item
Item #: 26277 -
Reproduction 60000 Mile 6 Month Lube Sticker for the 1967 - 1973 Mercury Cougar / Ford Mustang
Availability: In-Stock Item
Item #: 26364 -
Replaces Ford Part #: D2AF-12029-AA
Availability: Out of Stock
Item #: 42164 -
This walking cat decal measures 10.5" x 3.65".