Home > 1970 Mercury Cougar
All Available Parts - 1970 Mercury Cougar
Products (Click sub-categories above to ONLY display results for that Sub-Category) 701-800 of 5054
Sorted By:
Availability:
Display Options:
Availability: In-Stock Item
Item #: 41537 -
Includes machined pedal shaft, washer and special pin. Replaces Ford Part #: C5ZZ-2478-AK.
Availability: In-Stock Item
Item #: 41563 -
This great little kit replaces stock Ford bushings that can wear out in as quick as one year. This is a very simple repair and upgrade, once you have removed the pedal support from the car. Upon completion of this you will be rewarded with greatly reduced pedal pressure and the knowledge that you will never have to replace these bushings again. This is a must have for anyone with a manual transmission.Does not fit 1971-73 Mercury Cougar or Ford Mustang.
Availability: In-Stock Item
Item #: 41555 -
This kit has everything you need to repair your clutch and brake pedal and pedal support in one easy kit.Repairs 1967-70 Mercury Cougar or 1965-70 Ford Mustang. *Hint - All 1967-70 brake pedal hangers have the clutch pedal shaft bushings, even the automatic cars. The originals are swedged in. * Does not fit 1971-73 Mercury Cougar or Ford Mustang.
Availability: In-Stock Item
Item #: 30849 -
This reproduction clip secures the clutch pedal rod end as it comes through the clutch pedal hanger. Keep in mind that this reproduction is a different size compared to the original (see comparison above) and will need to be modified to make fit. As always, we recommend going with original used parts. You can find it here. Replaces Ford part number C8AZ-2B277-A ...
Availability: In-Stock Item
Item #: 33278 -
This kit has everything you need to repair your clutch and brake pedal and pedal support in one easy kit. Repairs 1967-73 Mercury Cougar or 1965-73 Ford Mustang. Plus many other Ford cars.This kit requires welding. For use on pedal hangers that are all wallered out, or 1971-73 pedal hangers that are not round. Kit has roller bearings. Quality Scott Drake / Holley product. *Hint - All 1967-70 brake pedal hangers have the clutch pedal shaft bushings, even the automatic cars. The originals are...
Availability: In-Stock Item
Item #: 41561 -
These four speed gears have the teeth reversed from the direction of the automatic gears. Made from Nylon. These gears only fit the 4 speed Toploaders. Click here to use our Speedometer Gear Calculator. Replaces Ford Part # : C2DZ-17271-C 20 Tooth Gear Pictured
Availability: Out of Stock
Item #: 41538 -
These four speed gears have the teeth reversed from the direction of the automatic gears. Made from Nylon. These gears only fit the 4 speed Toploaders. Click here to use our Speedometer Gear Calculator. Replaces Ford Part # : C2DZ-17271-G 20 Tooth Gear Pictured
Availability: Out of Stock
Item #: 41565 -
These four speed gears have the teeth reversed from the direction of the automatic gears. Made from Nylon. These gears only fit the 4 speed Toploaders. Click here to use our Speedometer Gear Calculator. Replaces Ford Part # : C2DZ-17271-A 20 Tooth Gear Pictured
Availability: In-Stock Item
Item #: 41581 -
These four speed gears have the teeth reversed from the direction of the automatic gears. Made from Nylon. These gears only fit the 4 speed Toploaders. Click here to use our Speedometer Gear Calculator. Replaces Ford Part # : C2DZ-17271-B 20 Tooth Gear Pictured
Availability: In-Stock Item
Item #: 41583 -
These four speed gears have the teeth reversed from the direction of the automatic gears. Made from Nylon. These gears only fit the 4 speed Toploaders. Click here to use our Speedometer Gear Calculator. Replaces Ford Part # : C2DZ-17271-D 20 Tooth Gear Pictured
Availability: Used / Wrecking Yard Item
Item #: 16-0067 -
Manual transmissions, include both 3 and 4 speed Top Loader transmissions. For use with 164 tooth flywheels. For use with all 1968 302 engines and 1969 - 1970 Boss 302 Eliminators. Cast aluminum construction. Shipped bare, no hardware or clutch fork. Search words 68 69 70 small block F J G code. Ford part number C5AZ-6392-BCasting number C5AA-6394-B *Note - This is not a replacement for 1970-1977 Ford Maverick or Mercury Comet 302 engines. See part C5DA-6394-A with 157 tooth flywheels. ...
Availability: Used / Wrecking Yard Item
Item #: 23862 -
Manual transmissions, include both 3 and 4 speed Top Loader transmissions. Ford part number C5TA-6394-A. For use with any 351 Windsor or 351 Cleveland engine for the years 1969 and 1970. Cast iron construction, for use with 164 tooth flywheels. Shipped bare, no hardware or clutch fork. Search words: 69 70 H M code engine Eliminator XR7 Sport Special
Availability: In-Stock Item
Item #: 41901 -
Quality reproduction clutch pedal that works on all 1969-70 Mercury Cougar and Ford Mustangs. Improved design for easier installation.
Availability: In-Stock Item
Item #: 14968 -
New internal speedometer gear fits 4 speed toploader transmissions. Replaces Ford Part #: C5ZZ-17285-A.
Availability: In-Stock Item
Item #: 42005 -
Very good quality replacement speedometer cables. 76 inches Replaces Ford Part # : C9ZZ-17260-B
Availability: In-Stock Item
Item #: 15300 -
Clutch Fork Pivot for Cougars manufactured after 2/16/1968. Replaces Ford Part #: C8AZ-7522-A.
Availability: Used / Wrecking Yard Item
Item #: 25023 -
D0DZ-7515-B Manual transmission clutch fork - 3 and 4 speed, stick shift transmissions. Alternate number D0DA-7515-B. Service replacement after 1973 D3DZ-7515-A for Maverick/Comet. Cougar 1970, 351 Engines. Mustang 1970, 250/302/351 Engines. Maverick 1971 - 1972, 250/302 Engines. Grabber Comet 1971 - 1972, 250/302 Engines. GT Fairlane 1970, 250/302/351 Engines. Torino / Ranchero 1970, 250/302/351 Engines. Montego / Cyclone 1970, 250/302/351 Engines. MX, ...
Availability: Used / Wrecking Yard Item
Item #: 25089 -
D0OZ-7515-A Manual transmission clutch fork - 4 speed, stick shift transmissions. Fork measures 12 inches long. Alternate number D0OA-7541-A. Designed for the big spline 1 3/8" input shaft toploaders. Cougar 1970, 428 Cobra Jet engines. Mustang 1970, 428 Cobra Jet engines. Torino / Ranchero 1970 - 1971, 429/429CJ Engines. Cobra Montego / Cyclone 1970 - 1971, 429/429CJ Engines.
Availability: Out of Stock
Item #: 41482 -
D0ZA-7E046-D Reproduction adapter plate for mounting the Hurst 4 speed shifter control assembly to the Top Loader transmission. 1970 Mercury Cougar and Ford Mustang big block 428 Cobra Jet 4 speed only. Ford master part number D0ZZ-7E046-A. Link to the expert on Ford shifter linkages. Check out our video on rebuilding your shifter below: ...
Availability: In-Stock Item
Item #: 25985 -
Very nice reproduction of the D0ZZ-15525-A 1970 Mercury Cougar and Ford Mustang 4 speed backup light wiring harness, with the factory installed Hurst shifters. Plugs into the backup lamp switch and connects to the harness plug on the firewall behind the engine.
Availability: In-Stock Item
Item #: 53245 -
Backup light switch retainer for Hurst shifters as installed on 1970-73 Mercury Cougar, Ford Mustang, and most vintage Ford cars with factory installed Hurst shifters.
Availability: In-Stock Item
Item #: 11297 -
Backup light switch for factory installed Hurst competition shifters from 1970-73. This is a Daniel Carpenter reproduction, these are still being made by Hurst in small quantities (see our premium version). It does not include the bracket for holding the switch.Listed in the Motorcraft catalog as SW-943Also fits:CometFairlaneMontegoTorino Check out our video on rebuilding your shifter below: ...
Availability: Used / Wrecking Yard Item
Item #: 16-0037 -
Rod used for locking the 3 speed manual transmission in "Reverse". Connects to the lower tab of the steering column and the reverse control transmission lever shift arm. Prevents the transmission from shifting out of reverse when the ignition key is removed. Rod is about 13-1/2 inches long. The 3 speed manual transmission, could be ordered on any 1970 Cougar with any 351 engine. Transmission code "1" on your door data tag. Ford part number D0ZZ-7E330-B.
Availability: In-Stock Item
Item #: 41269 -
Fits 3 speed or 4 speed manual floor shifts. Sold individually. Check out our video on rebuilding your shifter below:
Availability: In-Stock Item
Item #: 41478 -
Get a grip with this reproduction Hurst T handle, or shifter handle, for the Mercury Cougar or Ford Mustang equipped with a manual transmission. Threads are 3/8-16. Check out our video on rebuilding your shifter below: ...
Availability: In-Stock Item
Item #: 14895 -
You will not need to make any modifications to run this leather unit in place of your original rubber boot used on three and four speed manual transmissions.
Availability: In-Stock Item
Item #: 41503 -
For use without consoles. This chromed square window slips over the stock or original style shifter boot on all 1969 and 1970 Mercury Cougar or Ford Mustangs with 3 or 4 speed manual transmissions. Includes 1970 Hurst.Replaces Ford part # C9ZZ-7262-C / Casting # C9ZB-7262-B
Featured!
Availability: In-Stock Item
Item #: 26248 -
Reproduction chrome center cap with a black background and chrome Walking Cat logo for the Mercury equipped with the Magnum 500 wheel. The screw on mounting system on this reproduction cap is far superior to the original clip-on center caps. There are other reproduction center caps out there, but they are not nearly as nice. When using center caps on Legendary wheels, you will need these adapter plates. *NOTE* When installing these die cast center caps, keep in mind over tightening will...
Availability: Out of Stock
Item #: 42138 -
Set of 4 Chrome center caps with Blue background and chrome walking cat logo. These long awaited caps bolt right onto any Magnum 500 wheel with no modifications. They are 2 3/4" at their widest point and 5/8" tall. Fits the following models with Magnum 500 wheels: 1969 Mercury Cougar 1970 Mercury Cougar These will work with multiple brands / styles of after market wheels as well. Sold individually. When using center caps on Legendary wheels, you will need these adapter plates. *NOTE* Certain...
Availability: In-Stock Item
Item #: 42156 -
Set of 4 Chrome center caps with Blue background and chrome Mercury man logo. Better than original! These are held on by a sturdy plate and two screws from the backside which is much better than the original clip-on type. The Magnum 500 wheel was not available on the Mercury line-up until 1974 and it came with a red center cap, star-burst pattern, made from plastic. This brand new to the market cap is a great alternative for the many folks wanting to run an attractive, era correct looking...
Availability: In-Stock Item
Item #: 42157 -
The price you see is a temporary price reduction due to overstock. Set of 4 Chrome center caps with black background and chrome Mercury Man logo. Better than original! These are held on by a sturdy plate and two screws from the backside which is much better than the original clip-on type. When using center caps on Legendary wheels, you will need these adapter plates. *NOTE* Certain late model disc brake rotors and aftermarket rotors have a slight clearance issue with the dust cap and...
Availability: Out of Stock
Item #: 42159 -
Set of 4 Chrome center caps with Red background and chrome Walking Cat logo. Better than original! These are held on by a sturdy plate and two screws from the backside which is much better than the original clip-on type. There are other reproductions out there but none are of this quality. When using center caps on Legendary wheels, you will need these adapter plates. *NOTE* Certain late model disc brake rotors and aftermarket rotors have a slight clearance issue with the dust cap and these...
Availability: In-Stock Item
Item #: 42160 -
Set of 4 Chrome center caps with red background and chrome Mercury man logo. Better than original! These are held on by a sturdy plate and two screws from the backside which is much better than the original clip-on type. There are other reproductions out there but none are of this quality. When using center caps on Legendary wheels, you will need these adapter plates. *NOTE* Certain late model disc brake rotors and aftermarket rotors have a slight clearance issue with the dust cap and these...
Availability: In-Stock Item
Item #: 42161 -
Reproduction chrome center cap with black background and chrome Walking Cat logo. Better than original! These are held on by a sturdy plate and two screws from the backside which is much better than the original clip-on type. There are other reproductions out there, but none are of this quality. When using center caps on Legendary wheels, you will need these adapter plates. *NOTE* Certain late model disc brake rotors and aftermarket rotors have a slight clearance issue with the dust cap...
Availability: In-Stock Item
Item #: 42401 -
Chrome center cap with Red background and chrome Ford logo. Better than original! Original look wheel emblem is made from original dies. This plastic cap is painted and detailed in the original colors. This was never used on any year of Cougar but they do look good! When using center caps on Legendary wheels, you will need these adapter plates. *Note - Certain late model disc brake rotors and aftermarket rotors have a slight clearance issue with the dust cap and these center...
Availability: Out of Stock
Item #: 26228 -
Reproduction chrome center cap with Blue background and chrome walking cat logo. These long awaited caps bolt right onto any Magnum 500 wheel with no modifications. They are 2 3/4" at their widest point and 5/8" tall. These will work with multiple brands / styles of after market wheels as well. Sold individually. When using center caps on Legendary wheels, you will need these adapter plates. *NOTE* When installing these die cast center caps, keep in mind over tightening will...
Availability: In-Stock Item
Item #: 32575 -
Reproduction spinner cap for the Magnum 500 Legendary series wheel. Also works with the Magstar II wheel. Each spinner is die-cast with precision and finished in a show quality chrome plating. The exclusive anti-theft retainer plate keeps them in place and secure. A stamped aluminum Magnum 500 emblem and a "Bullseye" emblem are included so owners can choose which one to personalize their car with.Sold individually ...
Availability: In-Stock Item
Item #: 26245 -
Reproduction chrome center cap with red background and chrome Mercury man logo for the Mercury Cougar. These are held on by a sturdy plate and two screws from the backside which is much better than the original clip-on type. There are other reproductions out there, but none are of this quality. When using center caps on Legendary wheels, you will need these adapter plates. *NOTE* When installing these die cast center caps, keep in mind over tightening will separate the backing from...
Availability: In-Stock Item
Item #: 26237 -
Reproduction chrome center cap with blue background and chrome Mercury man logo for the Mercury Cougar. Better than original! These are held on by a sturdy plate and two screws from the backside which is much better than the original clip-on type. There are other reproductions out there, but none are of this quality. When using center caps on Legendary wheels, you will need these adapter plates. *NOTE* When installing these die cast center caps, keep in mind over tightening will separate the...
Availability: In-Stock Item
Item #: 26238 -
Reproduction chrome center cap with black background and chrome Mercury man logo. Correct for the 1967 or 1968 Mercury Cougar, but will fit any 1967-70 with style steel wheels. These are held on by a sturdy plate and two screws from the backside which is much better than the original clip-on type. There are other reproductions out there, but none are of this quality. When using center caps on Legendary wheels, you will need these adapter plates. Replaces Ford part # C7WY-1130-B....
Availability: In-Stock Item
Item #: 26242 -
Chrome center cap with Blue background and chrome walking cat logo for the Mercury Cougar. Better than original! New from Scott Drake. These quality center caps feature our high quality chrome bezels. Check out the details in our "Cougar" lens. When using center caps on Legendary wheels, you will need these adapter plates. *NOTE* When installing these die cast center caps, keep in mind over tightening will separate the backing from the chrome outer portion. Instead of over torquing,...
Availability: In-Stock Item
Item #: 26240 -
Reproduction chrome center cap with black background and chrome walking cat logo for the Mercury Cougar. These are held on by a sturdy plate and two screws from the backside which is much better than the original clip-on type. When using center caps on Legendary wheels, you will need these adapter plates. *NOTE* When installing these die cast center caps, keep in mind over tightening will separate the backing from the chrome outer portion. Instead of over torquing, we recommend a good...
Availability: In-Stock Item
Item #: 26241 -
Reproduction chrome center cap with red background and chrome walking cat logo for the Mercury Cougar. These are held on by a sturdy plate and two screws from the backside which is much better than the original clip-on type. When using center caps on Legendary wheels, you will need these adapter plates. *NOTE* When installing these die cast center caps, keep in mind over tightening will separate the backing from the chrome outer portion. Instead of over torquing, we recommend a good...
Availability: In-Stock Item
Item #: 42150 -
These never came from the factory. This is a reproduction of the original for 1967 and 1968 Mercury Cougars with Style Steel Wheels but with a different color background. Will work on any 67-70 with Style Steel Wheels. Set of 4 Chrome center cap with Solid Blue background and chrome Mercury Man logo. Better than original mounting! These reproduction caps are held on by a sturdy plate and two screws from the backside which is much better than the original clip-on type. There are other...
Availability: In-Stock Item
Item #: 42158 -
Set of 4 reproduction chrome center cap with red background and chrome Mercury man logo. These are held on by a sturdy plate and two screws from the backside which is much better than the original clip-on type. There are other reproductions out there but none are of this quality. When using center caps on Legendary wheels, you will need these adapter plates. *NOTE* Certain late model disc brake rotors and aftermarket rotors have a slight clearance issue with the dust cap and these...
Availability: In-Stock Item
Item #: 42402 -
Set of 4 reproduction chrome center caps with black background and chrome Mercury man logo. Better than original! Correct for the 1967 or 1968 Mercury Cougar, but will fit any 67-70 with Style Steel Wheels. These are held on by a sturdy plate and two screws from the backside which is much better than the original clip-on type. There are other reproductions out there but none are of this quality. When using center caps on Legendary wheels, you will need these adapter plates. OEM...
Availability: Out of Stock
Item #: 42404 -
Set of 4 reproduction chrome center caps with Blue background and chrome Mercury man logo. Better than original! New from Scott Drake. These quality center caps feature our high quality chrome bezels. Check out the details in our "Cougar" lens. Also available in red & black. *NOTE* Certain late model disc brake rotors and aftermarket rotors have a slight clearance issue with the dust cap and these center caps.**NOTE** When installing these die cast center caps, keep in mind over tightening...
Availability: In-Stock Item
Item #: 42407 -
Set of 4 reproduction chrome center caps with black background and chrome Walking Cat logo. These are held on by a sturdy plate and two screws from the backside which is much better than the original clip-on type. There are other reproductions out there but none are of this quality. When using center caps on Legendary wheels, you will need these adapter plates. *NOTE* Certain late model disc brake rotors and aftermarket rotors have a slight clearance issue with the dust cap and these center...
Availability: In-Stock Item
Item #: 42408 -
Set of 4 reproduction chrome center caps with Red background and chrome Walking Cat logo. Better than original! These are held on by a sturdy plate and two screws from the backside which is much better than the original clip-on type. There are other reproductions out there but none are of this quality. When using center caps on Legendary wheels, you will need these adapter plates. *NOTE* Certain late model disc brake rotors and aftermarket rotors have a slight clearance issue with the...
Availability: Ships Direct from Supplier (Except International)
Item #: 18943 -
These off-shore Magnum wheels are supplied to us by Scott Drake. We no longer carry the US made version as the quality was VERY inconsistent. This wheel has a 4 1/4" backspace. We now have Magnum 500 caps that feature the Mercury Logo and the walking cat caps as well. Center caps and lugs are sold separate.
NOTE! These wheels are intended to be balanced with a lugcentric adapter. They will not balance with a traditional cone spacer on the tire spin balancer. Many tire shops do not deal...
Availability: Ships Direct from Supplier (Except International)
Item #: 18944 -
These off-shore Magnum wheels are supplied to us by Scott Drake. We no longer carry the US made version as the quality was VERY inconsistent. This wheel has a 4 1/4" backspace. We now have Magnum 500 caps that feature the Mercury Logo and the walking cat caps as well. Center caps and lugs are sold separate. These are best suited for 1971-73 Cougars. To run a tire larger than a 225/60/15 you may have to modify your fenders and quarters.
NOTE! These wheels are intended to be...
Availability: In-Stock Item
Item #: 26919 -
New aluminum 15x8" Magnum 500 wheel for your Mercury Cougar or Ford Mustang. A great way to reduce the un-sprung weight on your Cat or Pony and look great while doing it! This item also includes a center cap, but they are a cheap plastic chromed cap with a blacked out center. We recommend using the adapter plates and Magnum 500 center caps we sell from Scott Drake. Lug nuts sold separately, get them here. ...
Availability: Ships Direct from Supplier (Except International)
Item #: 12129 -
New aluminum 17x7" Magnum 500 wheel for your Mercury Cougar or Ford Mustang. A great way to reduce the un-sprung weight on your Cat or Pony and look great while doing it! This item also includes a center cap, but they are a cheap plastic chromed cap with a blacked out center. We recommend using the adapter plates and Magnum 500 center caps we sell from Scott Drake. Lug nuts sold separately, get them here. ...
Availability: Ships Direct from Supplier (Except International)
Item #: 20678 -
New Legendary Series 15x7" Glossy Finish Magnum 500 wheel for your Mercury Cougar or Ford Mustang. While they look almost identical to the original chromed steel version, these are actually a lighter, better-balanced aluminum alloy with a protective coating. These wheels come with free chromed plastic center caps. The caps have a red Legendary logo but we can include at no cost, a set of black and chrome walking cat decals (click here). Just add it to your cart if you'd like these decals. If...
Availability: Ships Direct from Supplier (Except International)
Item #: 20679 -
New Legendary Series 15x7" Satin Finish Magnum 500 wheel for your Mercury Cougar or Ford Mustang. While they look almost identical to the original chromed steel version, these are actually a lighter, better-balanced aluminum alloy with a protective coating. These wheels come with free chromed plastic center caps. The caps have a red Legendary logo but we can include at no cost, a set of black and chrome walking cat decals (click here). Just add it to your cart if you'd like these decals. If...
Availability: Ships Direct from Supplier (Except International)
Item #: 20680 -
ETA FOR THIS ITEM IS 12/14/23Reproduction Scott Drake 16x8" Satin Black Magnum 500 wheel for your Mercury Cougar or Ford Mustang. These are the best quality of the three different Magnum 500 wheels you will find on the market today. The chrome is not only brilliant but it holds up great year after year. You may save a few dollars buying the other brands out there but why? We sell these wheels with a 4 1/2" backspace unless you specify otherwise. We now have Magnum 500 caps that feature the...
Availability: Ships Direct from Supplier (Except International)
Item #: 16246 -
New Legendary Series 15x8" Glossy Finish Magnum 500 wheel for your Mercury Cougar or Ford Mustang. While they look almost identical to the original chromed steel version, these are actually a lighter, better-balanced aluminum alloy with a protective coating. These wheels come with free chromed plastic center caps. The caps have a red Legendary logo but we can include at no cost, a set of black and chrome walking cat decals (click here). Just add it to your cart if you'd like these decals. If...
Availability: Ships Direct from Supplier (Except International)
Item #: 12308 -
New Legendary Series 17x7" Glossy Finish Magnum 500 wheel for your Mercury Cougar or Ford Mustang. While they look almost identical to the original chromed steel version, these are actually a lighter, better-balanced aluminum alloy with a protective coating. These wheels come with free chromed plastic center caps. The caps have a red Legendary logo but we can include at no cost, a set of black and chrome walking cat decals (click here). Just add it to your cart if you'd like these decals. If...
Availability: Ships Direct from Supplier (Except International)
Item #: 12309 -
New Legendary Series 17x8" Glossy Finish Magnum 500 wheel for your Mercury Cougar or Ford Mustang. While they look almost identical to the original chromed steel version, these are actually a lighter, better-balanced aluminum alloy with a protective coating. These wheels come with free chromed plastic center caps. The caps have a red Legendary logo but we can include at no cost, a set of black and chrome walking cat decals (click here). Just add it to your cart if you'd like these decals. If...
Availability: Ships Direct from Supplier (Except International)
Item #: 12980 -
New Legendary Series 15x7" Charcoal Finish Magnum 500 wheel for your Mercury Cougar or Ford Mustang. While they look almost identical to the original chromed steel version, these are actually a lighter, better-balanced aluminum alloy with a protective coating. We also have center caps for these wheels that feature the Mercury man or the walking cat logo. Center caps and lug nuts sold separately. These wheels come with free chromed plastic center caps. The caps have a red Legendary logo but we...
Availability: Ships Direct from Supplier (Except International)
Item #: 32003 -
New Legendary Series 15x7" Stealth Black Finish Magnum 500 wheel for your Mercury Cougar or Ford Mustang. While they look almost identical to the original chromed steel version, these are actually a lighter, better-balanced aluminum alloy with a protective coating. These wheels come with free chromed plastic center caps. The caps have a red Legendary logo but we can include at no cost, a set of black and chrome walking cat decals (click here). Just add it to your cart if you'd like these...
Availability: In-Stock Item
Item #: 26244 -
Reproduction chrome center cap with a black background and chrome Mercury Man logo for the Mercury equipped with the Magnum 500 wheel. The screw on mounting system on this reproduction cap is far superior to the original clip-on center caps. There are other reproduction center caps out there, but they are not nearly as nice. When using center caps on Legendary wheels, you will need these adapter plates. *NOTE* *NOTE* When installing these die cast center caps, keep in mind over tightening...
Availability: In-Stock Item
Item #: 26247 -
Reproduction chrome center cap with a red background and chrome Mercury Man logo for the Mercury equipped with the Magnum 500 wheel. The screw on mounting system on this reproduction cap is far superior to the original clip-on center caps. There are other reproduction center caps out there, but they are not nearly as nice. When using center caps on Legendary wheels, you will need these adapter plates. *NOTE* When installing these die cast center caps, keep in mind over tightening will separate...
Availability: In-Stock Item
Item #: 26243 -
Reproduction chrome center cap with a blue background and chrome Mercury Man logo for the Mercury equipped with the Magnum 500 wheel. The screw on mounting system on this reproduction cap is far superior to the original clip-on center caps. There are other reproduction center caps out there, but they are not nearly as nice. When using center caps on Legendary wheels, you will need these adapter plates. *NOTE* When installing these die cast center caps, keep in mind over tightening will...
Availability: In-Stock Item
Item #: 12156 -
These four speed gears have the teeth reversed from the direction of the automatic gears. Made from Nylon. These gears only fit the 4 speed Toploaders. Click here to use our Speedometer Gear Calculator. Replaces Ford Part # : C2DZ-17271-G 20 Tooth Gear Pictured
Availability: In-Stock Item
Item #: 13001 -
Speedometer cable with reducer for your 69 - 70 Cougar or Mustang with the C6 transmission.
Availability: In-Stock Item
Item #: 26738 -
Plastic Chrome center cap with Red background and chrome Ford logo. Better than original! Original look wheel emblem is made from original dies. This plastic cap is painted and detailed in the original colors. This was never used on any year of Cougar but they do look good! Replaces Ford Part # D0OZ-1130-F.
Availability: In-Stock Item
Item #: 15716 -
Individual reproduction anti-rattle rubber gasket for the stainless steel accent ring used on the Mercury Cougar or Cyclone. This unit is used to keep the accent rings from rattling and driving Cougar and Cyclone owners insane. You can run your wheels without these rings, however Ford used them, so we sell'em. Sold individually.
Availability: In-Stock Item
Item #: 26999 -
Set of 20 reproduction anti-rattle rubber gaskets for the stainless steel accent rings used on the styled steel wheels found on the Mercury Cougar or Cyclone. These units are used to keep the accent rings from rattling and driving Cougar and Cyclone owners insane. You can run your wheels without these rings, however Ford used them, so we sell'em. Set of 20
Availability: In-Stock Item
Item #: 30148 -
Reproduction aluminum wheel designed to look like the styled steel wheels that were optional in 1967 - 1970. Mercury was looking to make a wheel similar to the Cragar and Appliance brand after-market wheels available at the time so these will resemble era correct wheels on any Ford or Mopar product utilizing the 5 on 4 1/2 lug pattern. These wheels come with free chromed plastic center caps. The caps have a red Legendary logo but we can include at no cost, a set of black and chrome walking cat...
Spotlight!
Featured!
Availability: Ships Direct from Supplier (Except International)
Item #: 30149 -
*NOTE* These Legendary wheels require being installed with Legendary lug nuts: here. Reproduction aluminum wheel designed to look like the styled steel wheels that were optional in 1967 - 1970. Mercury was looking to make a wheel similar to the Cragar and Appliance brand after-market wheels available at the time so these will resemble era correct wheels on any Ford or Mopar product utilizing the 5 on 4 1/2 lug pattern. These wheels come with free chromed plastic center caps. The caps...
Availability: In-Stock Item
Item #: 31961 -
Reproduction 15 x 7 aluminum alloy wheel designed to look like the styled steel wheels that were optional in 1967 - 1970. Mercury was looking to make a wheel similar to the Cragar and Appliance brand after-market wheels available at the time so these will resemble era correct wheels on any Ford or Mopar product utilizing the 5 on 4 1/2 lug pattern. These wheels come with free chromed plastic center caps. The caps have a red Legendary logo but we can include at no cost, a set of black and...
Availability: Ships Direct from Supplier (Except International)
Item #: 32598 -
Reproduction 17 x 8 aluminum alloy wheel designed to look like the styled steel wheels that were optional in 1967 - 1970. Mercury was looking to make a wheel similar to the Cragar and Appliance brand after-market wheels available at the time so these will resemble era correct wheels on any Ford or Mopar product utilizing the 5 on 4 1/2 lug pattern. These wheels come with free chromed plastic center caps. The caps have a red Legendary logo but we can include at no cost, a set of black and...
Availability: Out of Stock
Item #: 15135 -
Used steel lateral support brace for Cougars and Mustangs with the 390-2V, 390-4V, or 428CJ FE engines. Identical to the 1970 FE lateral bracket except 1970 versions have square nuts on the reverse.Ford part # C8AZ-2888-A
Availability: Out of Stock
Item #: 30529 -
This plastic center cap comes with each Legendary Wheel we sell at no cost. We list them for those that may lose or break one. The overall width is 2 1/2" and they are designed for a opening that is 2 3/8 " wide. Sold individually.Check out our video on Legendary Wheels below: ...
Availability: In-Stock Item
Item #: 12461 -
Reproduction set of 4 short valve stem assemblies for the Mercury Cougar or Ford Mustang. These new stems will look great on your Magnum, Styled Steel, Shelby, Eliminator or even stamped steel wheel.
Availability: Ships Direct from Supplier (Except International)
Item #: 30459 -
Reproduction 15x7" Eliminator wheel with a black center and chrome rim for the Mercury Cougar or Ford Mustang / Torino. The only version of this wheel Mercury ever used on a factory order for a Mercury Cougar was a painted 14x6 with a trim ring used on the 1969 Eliminator. This black 15x7 is a really great custom made wheel that adds flash without deviating too far from the original look. As always, the cap is sold separate. Click here for the hubcap we recommend for this wheel. If you need a...
Availability: In-Stock Item
Item #: 30524 -
Reproduction 15x7" Eliminator wheel with a charcoal center and chrome rim for the Mercury Cougar or Ford Mustang / Torino. The only version of this wheel Mercury ever used on a factory order for a Mercury Cougar was a painted 14x6 with a trim ring used on the 1969 Eliminator. This charcoal 15x7 is a really great custom made wheel that adds flash without deviating too far from the original look. As always, the cap is sold separate. Click here for the hubcap we recommend for this wheel. If you...
Availability: Ships Direct from Supplier (Except International)
Item #: 30525 -
Reproduction 15x7" Eliminator wheel with a silver center and chrome rim for the Mercury Cougar or Ford Mustang / Torino. The only version of this wheel Mercury ever used on a factory order for a Mercury Cougar was a painted 14x6 with a trim ring used on the 1969 Eliminator. This silver 15x7 is a really great custom made wheel that adds flash without deviating too far from the original look. As always, the cap is sold separate. Click here for the hubcap we recommend for this wheel. If you need...
Availability: Used / Wrecking Yard Item
Item #: 24559 -
Air compressor mounting pedestal for 1969 and 1970 Mercury Cougars or Ford Mustangs with 390 or 428CJ engines. Casting number C9AA-2882-A.Ford part # C9AZ-2882-A.
Availability: Used / Wrecking Yard Item
Item #: 15163 -
Cast iron pedestal mount for the air conditioning compressor on all 1970 - 1973 Mercury Cougars and Ford Mustangs with the 351C engine, both the H code 351-2V and M code 351-4V engines. Ford MPC part # D0ZA-2882-C.
Availability: Used / Wrecking Yard Item
Item #: 15113 -
Used stamped steel lateral support bracket for all 1970 Mercury Cougars and Ford Mustangs with the 351 Windsor or Cleveland engine. Ford part # D0OZ-2888-A*NOTE* - Excludes all 1969 351 Windsor engines.
Availability: In-Stock Item
Item #: 10462 -
New sealed bearing for installing on your 1968-73 Mercury Cougar or Ford Mustang idler / tensioner pulley. This bearing also came in all of the "service replacement" idler pulley assemblies and is physically larger than the idler bearing for the 1968-69 only idler pulley (68-69 bearing sku: 10827). The center portion of the pulley, where this bearing would press into, has an inside diameter measurement of 1 9/16". On the smaller bearing pulley, this measurement is 1 3/8". Both versions of this...
Availability: In-Stock Item
Item #: 27449 -
Reproduction stud and nut assembly that the factory line workers used for locating the air conditioning pedestal bracket. Then backed up with a nut. Used on 289 / 302 / 351W / 390 / 428CJ pedestals from 1967 - 1973. Stud is threaded into the cylinder head for easy installation of the cast iron pedestal bracket.*Note - Excludes 351C and 429CJ.
Availability: In-Stock Item
Item #: 11-9913 -
Air conditioning bearing replacement service. Send your flat bearing style, fixed or adjustable A/C pulley and we will exchange it or rebuild your exact pulley with a new flat bearing. Either large or small flat bearings, same price. Dust caps hand fitted, for seamless installation. No extra tool marks, other than the factory peening. Check photos.Ford casting #'s D0AA-8A617-B, D0AZ-8678-D, C8AZ-8678-B, C8AZ-8678-C, C8AZ-8678-A, D8OH-19W653-A, D0AZ-8678-D.*Note* All new bearings will...
Availability: Restored / Remanufactured
Item #: 11-9903 -
Air conditioning belt tensioning pulley with new bearing. This adjustable bracket and pulley was used on all 1970-73 351 engines that came with A/C, as well as 1970 428CJ & 1971 429CJ. This part often has a casting number of D0AA-8A617-C1 but not always. This adjustable idler pulley is identified by having the large bearing pulley. Same as the C8AZ-8678-A adjustable idler pulley only with a small bearing pulley. We also offer a bearing replacement service to rebuild your adjustable idler...
Availability: Out of Stock
Item #: 20672 -
Stud that the factory line workers used for locating the air conditioning pedestal bracket. Then backed up with a nut. Used on 351C / 429CJ pedestals from 1970 - 1973.*Note - Excludes 289 / 302 / 351W / 390 / 428CJ engines.
Availability: Used / Wrecking Yard Item
Item #: 31170 -
Used steel lateral support brace for Cougars and Mustangs with 428CJ FE engines. Identical to the 1968-69 FE lateral bracket except 1970 versions have square nuts on reverse. Also the same bracket for Ford passenger car 390 up until 1971.Ford part # D0AZ-2888-B
Availability: In-Stock Item
Item #: 14241 -
High Quality cloth wrapped heater duct hose. This is the correct length for most cars, but will need to be cut for proper fit in some applications. Hose diameter: 2 1/2"
Availability: In-Stock Item
Item #: 13946 -
These heater control knobs are sold in a set of three and fit good and tight. It is often little details like this that separate 1st and 2nd place when judged at car shows. Replaces Ford Part #: C9ZZ-18519-A.
Availability: In-Stock Item
Item #: 42501 -
This little switch is mounted on the back side of your interior temperature control panel on most 1969-72 Ford products. It energizes the A/C pump when you move the the knob to the "A/C" position. Correct dimensions and easy to install. Starting sometime in 1972, this switch was incorporated with the vacuum selector manifold. This is part of the switch assembly C9ZZ-19B888-A.
Availability: Used / Wrecking Yard Item
Item #: 11-0134 -
Correct for Mercury Cougars and Ford Mustangs with air conditioning. This is a lower profile design to clear your factory installed in-dash A/C system. Replaces Ford part number C9ZB-6506010.Reference from mercurycougar.net: "Best guys to always talk to about Cougars..will take the time on the phone with you, call you back if you leave a message, got all the time in the world for you when your talkin 'cause your important to them. Greatest thing for our hobby. Thanks Lin and Don for...
Availability: Used / Wrecking Yard Item
Item #: 11-0036 -
Complete vent includes mounting hardware. These are sold individually, so please choose between driver and passenger side. We do not guarantee the felt strip to be in place (see picture for example) and we do not guarantee good chrome finish on the louvers. We do inspect them carefully for cracks. Ford part # C9ZZ-19893-D driver side, C9ZZ-19893-C passenger side. *NOTE* The leading edges of the round plastic register are chromed. Often the chrome will wear off, but if you rotate the register...
Availability: In-Stock Item
Item #: 13088 -
New clear plastic lens or face plate for the A/C and heater control on all 1969-70 Mercury Cougar or Ford Mustang. These are constructed with the bend on the top to refract the light for illumination. *Tip for removal of your old lens. We have found it easiest to use a dremmel or other type of small cutoff wheel to carefully grind away the factory crimps. Use your safety glasses!
Availability: Used / Wrecking Yard Item
Item #: 11-0103 -
Used Grade B Windshield Defroster Nozzle for any 1969-70 Mercury Cougar or Ford Mustang with factory air conditioning. Grade B will have a small crack or chip, or possibly a broken mounting tab.Replaces Ford part number C9ZZ-18490-B.
Availability: Used / Wrecking Yard Item
Item #: 11-0102 -
Used Grade A Windshield Defroster Nozzle for any 1969-70 Mercury Cougar or Ford Mustang with factory air conditioning. Grade A will be free from physical defects, may have a minor scuff or scratch.Replaces Ford part number C9ZZ-18490-B.
Availability: Used / Wrecking Yard Item
Item #: 11-0115 -
This little switch is mounted on the back side of your interior temperature control panel on most 1969-72 Ford products. It energizes the A/C pump when you move the the knob to the "A/C" position. 15 AMP micro switch. Starting sometime in 1972, this switch was incorporated with the vacuum selector manifold. This is part of the switch assembly C9ZZ-19B888-A.Tested and guaranteed to work, originally produced by Cherry Electrical Corp.
Availability: Used / Wrecking Yard Item
Item #: 11-0118 -
Grade A used A/C center vent for any 1969-70 Mercury Cougar. These will have almost perfect chrome plating, minor blemishes only, no pitting. Fits all models of 1969 and 1970 Cougar. See our other listing for Grade B versions of this air conditioning center register or vent. Limited to stock on hand. Does not come with attaching clips, see 'related' tab. Rear dimensions: 6-1/4 x 2 inches. Alternately, this center vent can be installed in a 1969-70 Ford Mustang. Similar dimensions, doesn't have...
Availability: Used / Wrecking Yard Item
Item #: 11-0119 -
Grade B used A/C center vent for any 1969-70 Mercury Cougar. These will have some blemishes, or pitting. Fits all models of 1969 and 1970 Cougar. See our other listing for Grade A version of this air conditioning center register or vent. Does not come with attaching clips, see 'related' tab. Rear dimensions: 6-1/4 x 2 inches. Alternately, this center vent can be installed in a 1969-70 Ford Mustang. Similar dimensions, doesn't have the small angle bend. C9ZZ-19863-A or C9ZA-19C683-A....
Availability: Used / Wrecking Yard Item
Item #: 11-0122 -
Used bracket for installing the defrost nozzles assembly to the dash on all 1969-70 Mercury Cougar or Ford Mustang with factory air conditioning. Bracket only, no attaching hardware.