Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 14967 -
(7521) The attaches to the bottom leg of your equalizer bar and the pointed end fits into the recess of your clutch fork. Replaces Ford Part #: C7ZZ-7521-L.
Wanted!
Buy
Details
Availability: Used / Wrecking Yard Item
Item #: 33622 -
Core used set of Eaton clutch brushes, we save these because of the FoMoCo stamped bracket with Ford part number C7AA-2979-A. It is possible to reuse the FoMoCo stamped bracket from the originals and re-rivet to reproduction version. Yes, you can make it sneaky concours. You would have to figure out the rivets though. See related items for NEW Eaton brushes. Pitts compressor clutch is the most common one starting in 1969. Replaces Ford part #: C5ZZ-2979. C7AA-2979-A ...
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 41789 -
This set of brushes only fits the Eaton brand of air compressor clutch. These are exact reproductions made from the original tooling. It is possible to reuse the FoMoCo stamped bracket from the originals and re-rivet to this version. Yes, you can make it sneaky concours. You would have to figure out the rivets though. See related items for core brushes with stamped Ford numbers. Pitts compressor clutch is the most common one starting in 1969. Replaces Ford part #: C5ZZ-2979. C7AA-2979-A ...
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 14310 -
Equalizer bar or "Z" bar for small block engines with a manual transmission. Both 3 and 4 speed manual transmissions. Replaces Ford part number C7ZZ-7528-G.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 41577 -
Nice reproduction of the original. Street name is Z-Bar.
For all 1967 - 1970 FE engines 390 and 428CJ.
Replaces Ford part #: C7ZZ-7528-B.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 13823 -
Clutch equalizer pivot mount, engine side. Zinc plated. Replaces Ford part #: C7ZZ-7A572-BR.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 41532 -
Mounts on frame for equalizer bar to ride on. Replaces Ford Part #: C5ZZ-7507-A.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 41406 -
C5OZ-7515-B Manual transmission clutch fork - 3 and 4 speed, stick shift transmissions. Fork measures 9-1/4 inches long. Specifically used with a 157 tooth flywheel, as opposed to the 164 tooth fly wheel used after Feb 1968.Replaces ford Part # C5OZ-7515-B. Cougar before 2-15-1968, 289/302 Engines. Mustang before 2-15-1968, 289/302 Engines. *Note - This style of clutch fork uses the 'wire' for the holder, not the clip. ...
Wanted!
Buy
Details
Availability: Out of Stock
Item #: 16-0041 -
C5OZ-7515-B Manual transmission clutch fork for small block V8 engines - 3 and 4 speed, stick shift transmissions. Fork measures 9-1/4 inches long from the divot where the rod rides to the tip of the forked end. Specifically for the C5DA-6394-A bellhousing that used a 157 tooth flywheel. Cougar 1967 through 2-15-1968. XR7, XR7-G. Mustang 1965 through 2-15-1968. 2+2, GT. Fairlane 1965 through 2-15-1968. 500, XL, Custom. Torino / Ranchero 1968 through 2-15-1968. 500, XL Comet 1965 through...
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 41551 -
Used until early (prior to 2/15/1968) on manual transmission cars. Comes with rivets. Replaces Ford part #: B9AZ-7522-B.This style uses the early clutch fork with the anti rattle wire.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 32757 -
Manual transmission clutch kit for all 1967-73 Mercury Cougar or Ford Mustang with 3 or 4 speed transmissions and 289, 302, or 351 engines. This is a 10 inch disk, pressure plate, throw out bearing, pilot bearing, and alignment tool. The clutch disc is asbestos free.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 32758 -
Manual transmission clutch kit for all 1967-69 Mercury Cougar or Ford Mustang with 3 or 4 speed transmissions and 390 engines. This is a 11 inch disk, pressure plate, throw out bearing, pilot bearing, and alignment tool. The clutch disc is asbestos free.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 26772 -
This pedal assembly is a copy of the 1967 clutch pedal. It can be used on 1968 with no modifications. Fits all engine applications. Has replaceable shaft as shown. Replaces Ford Part #: C7ZZ-7519-A.
Wanted!
Buy
Details
Availability: Used / Wrecking Yard Item
Item #: 24305 -
C7ZZ-7519-A We also offer used clutch pedals along with our quality reproduction 1967-1968 clutch pedal. These pedals will no doubt show some wear around the clutch rod holes. Three and four speed pedals are all the same. Mustang is the same too.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 11798 -
Bumper that helps stop the 'clunk' noise when you take your foot off of the clutch pedal on manual transmission 67 - 68 Cougars and Mustangs.Replaces Ford Part Number: C7ZZ-7583
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 33278 -
This kit has everything you need to repair your clutch and brake pedal and pedal support in one easy kit. Repairs 1967-73 Mercury Cougar or 1965-73 Ford Mustang. Plus many other Ford cars.This kit requires welding. For use on pedal hangers that are all wallered out, or 1971-73 pedal hangers that are not round. Kit has roller bearings. Quality Scott Drake / Holley product. *Hint - All 1967-70 brake pedal hangers have the clutch pedal shaft bushings, even the automatic cars. The originals are...
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 41494 -
This reproduction stainless trim mounts over your pedal pad. Not only adds style but also holds your pad in place. Replaces Ford part number C5ZZ-7B544-A.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 41537 -
Includes machined pedal shaft, washer and special pin. Replaces Ford Part #: C5ZZ-2478-AK.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 11775 -
(7521) Correct contour insures a good fit, 12 1/2" long. This is for both 3 and 4 speed cars. Check out the comparison picture with the off-shore crapola rod sold by most vendors. The only reason you replace this rod is that it is wore down in the area where the bushing seats. Unfortunately when the Chinese were given a sample to copy they must have been given a worn out one! The one on the left (made in USA) fits tight with the bushing and was copied from a NOS sample. Replaces Ford Part #:...
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 32162 -
Manual transmission clutch throw out bearing for all 1967-73 Mercury Cougar or Ford Mustang with 3 or 4 speed transmissions and 289, 302, or 351 engines. This is with a 10 inch disc.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 42038 -
Sold as pair, exact copy. These also double to keep your windlace firmly in place.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 32893 -
These emblems can be used anywhere from your toolbox, to the dash or trunk and anywhere in between. Makes a great accent to other fender emblems or door panels. Peel and stick.Sold as a pair.
Wanted!
Buy
Details
Availability: Used / Wrecking Yard Item
Item #: 31487 -
Used 1969 351W coil mounting bracket. This version of the bracket is specific on the 351W and allows extra room for the oil dipstick. We happen to know that there are no less than 4 different versions of factory Ford coil brackets used on 1967-73 Mercury Cougar and Ford Mustangs and literally all other Ford cars and trucks. Some have the coil on top of the intake manifold, while some years and engines have the coil mounted to the front of one of the cylinder heads. Listed in the...
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 11302 -
Reproduction coil mounting bracket. The manufacturer claims it fits all cars 1967-73. We happen to know that there are no less than 4 different versions of factory Ford coil brackets used on 1967-73 Mercury Cougar and Ford Mustangs and literally all other Ford cars and trucks. Some have the coil on top of the intake manifold, while some years and engines have the coil mounted to the front of one of the cylinder heads. To our knowledge this is the only reproduction style on the...
Wanted!
Buy
Details
Availability: Used / Wrecking Yard Item
Item #: 32631 -
Used coil mounting bracket. This version of the bracket is probably the most common. We happen to know that there are no less than 4 different versions of factory Ford coil brackets used on 1967-73 Mercury Cougar and Ford Mustangs and literally all other Ford cars and trucks. Some have the coil on top of the intake manifold, while some years and engines have the coil mounted to the front of one of the cylinder heads. This version has the notch as shown. We know that this version was used on...
Wanted!
Buy
Details
Availability: Used / Wrecking Yard Item
Item #: 12379 -
We will loan this coil spring compressor for 60 days, with a 100% refundable purchase price. This tool now comes with a bearing to make the job much easier. Only available to customers that purchase our front suspension rebuild kits. Tool must be returned in undamaged condition with no missing parts within the 60 day time period. Returns past 60 days are subject to a 25% restocking fee. Coil spring compressing tool, this is a must for safely removing front coil springs on any 1967-73...
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 12-3009 -
New coil spring compressing tool to compress the coil springs of the 1967-73 Mercury Cougar or 1965-73 Ford Mustang. This tool now comes with a bearing to make the job much easier. This spring compressor is a must for safely removing front coil springs. We also offer a 60 Day Loaner if you only need the tool for a short period of time. *NOTE* Not recommended for heavy duty coil springs like found on pickup trucks and full sized cars. ...
Wanted!
Buy
Details
Availability: Used / Wrecking Yard Item
Item #: 24316 -
Used driver side coil spring cover, taken from a parts car. Ford part # C7ZZ-3383-A.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 26654 -
Made from soft flexible rubber very similar to the OEM material. Sold individually. Two required per vehicle. These are the coil spring insulators available from most Mustang/Cougar suppliers. If you prefer polyurethane insulators, you can find them here. Replaces Ford Part #: C4DZ-5415-A.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 26684 -
Features quality stamped steel construction, bushings, nuts, anti-squeak coil protector pads. From the get go these were never a very good design... The rubber is prone to cracking and the unit will bind under severe use. Not just speaking of the unit we are offering but all of them including the original Ford units. Here is an interesting article for those that are not happy with status quo. Global West and others have come up with their own solutions and after we have spent more time testing...
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 11979 -
High Performance Coil Spring Perches offer a very affordable upgrade to stock spring perches with rubber bushings. These are made with synthetic elastomer bushings which are similar to polyurethane in performance and longevity, but will not squeak like polyurethane. The perch can rotate 360 degrees on the shaft, which allows the front suspension to articulate freely. This feature also eases the installation of the coil spring. Zerk grease fittings are installed and locking nuts are included....
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 26409 -
Replica of the coil spring shipping tag that would have been found on factory delivered 1967 - 1973 Cougars and Mustangs.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 26688 -
These Linear springs are custom wound for the performance-oriented customer. These feature 600-pound/inch rating and will lower the car approximately one inch from stock. Painted black, sold as a pair. Note: If you look close at factory sales pictures from the day you will notice the cars sit about 1" lower in back than front. These springs will level the car out provided your rear leaf springs are not sagging. Linear springs are the easiest to understand. When you think of a spring,...
Wanted!
Buy
Details
Availability: Used / Wrecking Yard Item
Item #: 15-0032 -
One year only part not found on any other car except Cougar and Mustang with tilt. If you would like to run a 1968 or newer steering wheel on your 1967 then you need to exchange this cover with the version found on the 1967 Thunderbird which has no lip at the top. We have these in stock and would enthusiastically trade it for the Cougar / Mustang upper cover. *NOTE* For tilt column service, you can contact Tony Augustine at 6t8cougarguy@gmail.com. Tony is a trusted colleague of WCCC and we've...
Wanted!
Buy
Details
Availability: Used / Wrecking Yard Item
Item #: 15-0033 -
This Thunderbird collar is a good substitute for those wanting to put an after-market or 1968 up steering wheel on their 1967 Cougar / Mustang. We also suggest purchasing this collar when installing our reproduction 1967 Mustang deluxe steering wheel. *NOTE* For tilt column service, you can contact Tony Augustine at 6t8cougarguy@gmail.com. Tony is a trusted colleague of WCCC and we've sent many customers his way since our column specialist retired last year. ...
Wanted!
Buy
Details
Availability: Used / Wrecking Yard Item
Item #: 30252 -
Hot idle compensator valve assembly for many Ford engines with PCV, starting in 1964 through early 1968. Typically found on 1964-66 Ford 260-2V, and 289-2 engines with air conditioning. 1967-68 289-2V, 302-2V and some 390 engines all with air conditioning and PCV or closed emissions. The Ford assembly manual indicates that the Hot Idle Compensator Valve 'T' Assembly, was installed by removing 3/4 inches of the PCV hose, 2-1/4 inches (on center of the PCV valve). See picture for clarification....
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 13789 -
Complete reproduction front drum brake spring kit for Ford Mustangs equipped with 9" drums. This kit contains all the replacement springs and hold downs required to do a professional brake job on front drum brakes. Kit includes enough parts for two wheels.
Wanted!
Buy
Details
Availability: Ships Direct from Supplier (Except International)
Item #: 11686 -
Complete floor pan for the 1965-68 Ford Mustang. NOTE: Can be made to fit 67-78 Cougar, Included seat risers are Mustang versions, which are taller than the Cougar seat risers. We recommend re-using your original Cougar seat risers, unless you want the extra height of the Mustang risers. Also note that the risers included with this floor pan will not be attached, you'll have to weld them on. Keep in mind Cougar has a longer wheel base which make the portion under the back seat substantially...
Wanted!
Buy
Details
Availability: Used / Wrecking Yard Item
Item #: 10079 -
This is a complete set of four used headlight bulbs, marked with the FoMoCo logo. These sets come with two high beam and two low beam bulbs. Each bulb is tested by the electrical department. If you're trying to keep your Cougar or Mustang as close to original as possible, you should definitely grab a set.These bulbs are date coded, so if you want a particular date, be sure to mention it in the comments section of your order.
Wanted!
Buy
Details
Availability: Out of Stock
Item #: 14035 -
This complete four piece kit is for any small block 289, 302, or 351 Windsor Cougar 1967, 1968 and 1969.
Wanted!
Buy
Details
Availability: Used / Wrecking Yard Item
Item #: 31880 -
This complete four part kit is correct for any 1967-68 small block 289 or 302, and 351 Windsor Mercury Cougar or Ford anything 1967, 1968 and 1969. Used aluminum pump mounting bracket, front adjusting bracket with large hole, pivot stud, and nut.If you do not have a air conditioning you will need a spacer in place of the round spacer shown. If you have the 351 Windsor without A/C, you will need a the rectangular spacer which is sold separately.
Wanted!
Buy
Details
Availability: Used / Wrecking Yard Item
Item #: 31881 -
This complete four part kit is correct for any 1969 small block 351 Windsor Mercury Cougar or Ford anything 1969. Used aluminum pump mounting bracket, front adjusting bracket with large hole, pivot stud, and nut. If you do not have a air conditioning you will need a the rectangular spacer which is sold separately.
Wanted!
Buy
Details
Availability: Ships Direct from Supplier (Except International)
Item #: 42069 -
This unit is for Mercury Cougars and Ford Mustangs, is pre-assembled, and includes the drier and all brackets.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 41341 -
Reproduction Console Ashtray Bumper for the 1967 Mercury Cougar or Ford Mustang.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 53209 -
New chrome finish screws for attaching OEM consoles. Screws fit all stock consoles 1967-73 on Mercury Cougar and Ford Mustang, most any Ford consoles actually. Phillips head oval. 1967-68 consoles use 4 attaching screws, 1969-70 consoles need 6 along the outside, 1971-73 consoles have a total of 8 screws along the outside. These are 1-1/2 inches long like the originals.
Wanted!
Buy
Details
Availability: In-Stock Item
Item #: 13925 -
Reproduction aluminum shift indicator console overlay for the Mercury Cougar or Ford Mustang. Although a brushed finish is correct, this reproduction has a coarser brush stroke when compared to the originals and is a bit dull. We recommend a quick polish to make them look closer to the finish of the originals.
These fit well, and unless you put them up against an original, it is hard to tell the finish is slightly different.
This installs around your console...