 |
 BELLHOUSINGS(Click Here for More Information or to Order)
Safety Warning: For very high-performance applications or drag racing we suggest considering a NHRA approved scattershield. National Hot Rod Association accepted bellhousings are rated to 7,000 rpms.
|
|
|
 Clutch Pedals and Parts(Click Here for More Information or to Order)
|
|
|
 Manual Transmission Cross Members(Click Here for More Information or to Order)
Transmission Support Cross Member
6A023
In the Master Parts Catalog this part is listed as a Rear Engine Support. We recommend that the rubber transmission mount be inspected and replaced if cracked or damaged prior to installation. Refer to your Shop Manuals for bolt
torque specifications and proper orientation of the cross member.
|
|
|
 Equalizer Parts(Click Here for More Information or to Order)
Equalizer Parts for the 1967 through 1973 Mercury Cougar with a Manual Transmission
|
|
|
 Shift Knobs(Click Here for More Information or to Order)
Shift Knobs for the 1967 - 1973 Mercury Cougar
|
|
|
 Shift Levers(Click Here for More Information or to Order)
Shift Levers for the 1967 - 1973 Mercury Cougar
|
|
|
 Speedometer Cables & Gears(Click Here for More Information or to Order)
Speedometer Cables & Gears for the 1967, 1968, 1969, 1970, 1971, 1972 & 1973 Mercury Cougar
|
|
|
 Upper and Lower Shift Boots(Click Here for More Information or to Order)
Upper and Lower Shift Boots for the 1967 - 1973 Mercury Cougar
|
|
|
| Reverse Lock Control Rods (Click Here for More Information or to Order)
Starting with the model year 1970, Ford moved the ignition key to the steering column and implemented a locking steering wheel and locking transmission shifter for anti-theft reasons. This “Rod” connects to the bottom of your steering column and locks your transmission shifter in reverse.
|
|
|
 5 Speed Conversion Parts - T5(Click Here for More Information or to Order)
|
|
|
| 1967 - 1972 Mercury Cougar 3 Speed Manual Transmissions (Click Here for More Information or to Order)
The Cougar 3 speed manual transmission, is indicated by a “1” on the door data plate information under transmission. That code 1, was used across all years 1967 – 1972. Ford referred to this fully synchronized transmission as the “3.03” transmission. The engineering term “3.03” is the distance in inches between the centerlines of the mainshaft and the countershaft.
At West Coast Classic Cougars the transmissions that we sell are “Used”, meaning that they are ‘takeoffs’ from the many 1967 – 1973 Cougars that we have purchased and scrapped for the purpose of organ donations to breath life into those Classic Cougars that deserve a second chance at life.
Our takeoff or takeout transmissions are generally from long parked Cougars that have sat neglected for several years or more. A transmission is described as an undamaged case, tailshaft, with all internals. It will not include the following – shifter, shifter mounting plate, shift rods, backup switch or wiring, bellhousing, clutch or pressure plate, mount or crossmember, or yoke. It will be a used bare transmission like you might find at a swapmeet.
|
|
|
 1967 - 1973 Mercury Cougar 4 Speed Manual Transmissions(Click Here for More Information or to Order)
The Cougar 4 speed manual transmission, is indicated by either a “5” or “6” on the door data plate, under transmission. Code “5” a wide ratio transmission, and “6” a close ratio transmission were used across all years 1967 – 1973. This ‘Top Loader’ is a Ford built transmission and is revered as the “strongest most reliable transmission ever built”. The Top Loader name comes from the plate on top where the gear assembly is ‘top loaded’. The 3 speed 3.03 is also a ‘top loader’.
At West Coast Classic Cougars the transmissions that we sell are “Used”, meaning that they are ‘takeoffs’ from the many 1967 – 1973 Cougars that we have purchased and scrapped for the purpose of organ donations to breath life into those Classic Cougars that deserve a second chance at life.
Our takeoff or takeout transmissions are generally from long parked Cougars that have sat neglected for several years or more. A transmission is described as an undamaged case, tailshaft, with all internals. It will not include the following – shifter, shifter mounting plate, shift rods, backup switch or wiring, bellhousing, clutch or pressure plate, mount or crossmember, or yoke. It will be a used bare transmission like you might find at a swapmeet.
|
|
|
 1967 - 1973 Mercury Cougar Roller Bearing Pilot Bushing - Repro(Click Here for More Information or to Order) Price:$10.00
Quality part with roller bearings on the inside, fits small and big block. Replaces Ford Part #: C7AZ-7600-A.
|
|
|
 1967 - 1968 Mercury Cougar Clutch Pedal Pad - Repro(Click Here for More Information or to Order) Price:$5.00
Quality reproduction. Replaces Ford Part #: C5ZZ-7A624-B.
|
|
|
 1967 - 1973 Mercury Cougar Clutch Rod Bushings - Repro(Click Here for More Information or to Order) Price:$3.00
These are to put on either end of your clutch pedal rod. Replaces Ford Part #: C0AZ-7526-B.
|
|
|
 1967 - 1968 Mercury Cougar Clutch Pedal To Equalizer Bar Rod - Repro (Click Here for More Information or to Order) Price:$21.50
Correct contour insures a good fit. This is for 3 and 4 speed cars. Replaces Ford Part #: C7ZZ-7521-A.
|
|
|
 1969 - 1970 Mercury Cougar 3 and 4 Speed Pedal to Z Bar Rod - Repro(Click Here for More Information or to Order) Price:$18.50
Correct Contour and fit. Connects pedal to Equalizer bar. Replaces Ford Part #: C9ZZ-7521-C.
|
|
|
 1967 - 1968 Mercury Cougar Lower Clutch Adjustment Rod - Repro(Click Here for More Information or to Order) Price:$19.50
The attaches to the bottom leg of your equalizer bar and the pointed end fits into the recess of your clutch fork. Replaces Ford Part #: C7ZZ-7521-L.
|
|
|
 1967 - 1968 Mercury Cougar Clutch Fork Pivot - Repro(Click Here for More Information or to Order) Price:$16.00
Used until early 1968 on manual transmission small block cars. Comes with rivets. Replaces Ford part #: B9AZ-7522-B.
|
|
|
 1967 - 1970 Mercury Cougar Master Roller Bearing Pedal Hanger Repair Kit - New(Click Here for More Information or to Order) Price:$55.00
This great little kit replaces stock Ford bushings that can wear out in as quick as one year. This is a very simple repair and upgrade . . .
|
|
|
 1969 - 1973 Mercury Cougar Clutch Stainless Pedal Pad Trim - Repro(Click Here for More Information or to Order) Price:$16.00
Stainless Clutch Pedal Pad Trim. Replaces Ford Part #: C9ZZ-7B544-A.
|
|
|
 1967 - 1973 Mercury Cougar Clutch Pedal Rod To Firewall Seal - Repro(Click Here for More Information or to Order) Price:$6.50
Reproduction Clutch Pedal Rod To Firewall Seal.
Replaces Ford Part #: C6OZ-7533.
|
|
|
 1971 - 1973 Mercury Cougar 429 and 351 Clutch Lever Dust Boot - Repro(Click Here for More Information or to Order) Price:$35.00
Replaces Ford Part #: C5AZ-7513-A.
|
|
|
 1967 - 1970 Mercury Cougar 390 and 428 Clutch Lever Dust Boot - Repro(Click Here for More Information or to Order) Price:$24.00
This reproduction is made from the original Ford tooling and is new to the market . . .
|
|
|
 1967 - 1968 Mercury Cougar Deluxe Shift Boot Bezel - New(Click Here for More Information or to Order) Price:$35.00
This bezel was never offered from the factory on a Cougar but is a very attractive part for those with a manual transmission and no console. Works with rubber or leather shift boot, three or four speed manual transmission.
|
|
|
 1967 - 1968 Mercury Cougar Power Brake Pedal Hanger - Used(Click Here for More Information or to Order) Price:$65.00
This is the correct hanger for a 1967 - 68 Cougar with either power disc brakes or power drum brakes. We have carefully shown the mounting position of the pedal so you can drill your existing manual brake pedal hanger. If you have a...
|
|
|
 1967 - 73 Mercury Cougar Brake and Clutch Pedal Bushings - Repro(Click Here for More Information or to Order) Price:$3.00
Made from high strength, wear resistant plastic. Two required for automatic cars, four for manual transmission cars.
|
|
|
 1967 - 1968 Mercury Cougar Manual Transmission Shift Bezel - NOS(Click Here for More Information or to Order) Price:$265.00
They made three different versions of this plate for non console Mercury Cougars equipped with a...
|
|
|
| 1967 - 1970 Mercury Cougar 390 / 427 / 428CJ Engine Block Plate Spacer - Used (Click Here for More Information or to Order) Price:$65.00
Kind of a one plate fits all deal. Ford Part #: C3AZ-7007-F.
|
|
|
| 1971 Mercury Cougar 429 Cobra Jet Engine Block Spacer Plate - Used (Click Here for More Information or to Order) Price:$85.00
1971 429CJ engines with 4 speed manual transmissions. Ford Part #: C9AZ-7007-B.
|
|
|
| 1967 - 1970 Mercury Cougar 390 & 428CJ Flywheel Inspection Cover - Used (Click Here for More Information or to Order) Price:$45.00
1967 - 1970 390 & 428CJ Flywheel and clutch inspection cover plate. Manual 3 speed (390 only) and 4 speed Toploader transmissions only. Attaches to lower bell housing.
Search words: 67 68 69 70 1968 1969 FE 6.5 litre liter dust cover S R Q code engines Eliminator. Will have a small blemish of some sort but will not be dented in or rusty.
|
|
|
 1969 Mercury Cougar Manual Transmission Deluxe Console Insert - Repro(Click Here for More Information or to Order) Price:$105.50
Absolute perfection in every detail, if all reproductions were this nice there would be no...
|
|
|
 1969 Mercury Cougar Manual Transmission Console Insert / No Wood Grain - Repro(Click Here for More Information or to Order) Price:$134.50
This is for your three or four speed manual transmission 1969 Cougar or...
|
|
|
 1970 Mercury Cougar Manual Transmission Deluxe Console Insert - Repro(Click Here for More Information or to Order) Price:$125.00
The 70 is unique over the 69 in that it does not...
|
|
|
 1967 - 1968 Mercury Cougar Clutch Pedal Return Spring - Repro(Click Here for More Information or to Order) Price:$15.50
This attaches to the bracket mounted on the top side of your pedal hanger over to the clutch pedal itself.
|
|
|
 1969 - 1973 Mercury Cougar Clutch Pedal Return Spring - Repro(Click Here for More Information or to Order) Price:$30.00
Spring comes complete with two new nylon bushings already installed.
|
|
|
 1967 - 1968 Mercury Cougar Clutch Pedal Spring Return Bracket - Repro(Click Here for More Information or to Order) Price:$30.00
Correct threads and hole pattern for 1967 - 1968 Mercury Cougar.
|
|
|
 1967 - 1968 Mercury Cougar Clutch Pedal Stop Bracket - Repro(Click Here for More Information or to Order) Price:$30.00
Replaces Ford Parts #: C2OZ-7A630-A.
|
|
|
 1967 - 1970 Mercury Cougar Clutch Pedal Repair Shaft - Repro(Click Here for More Information or to Order) Price:$15.00
Replaces Ford Part #: C5ZZ-2478-AK.
|
|
|
 1969 - 1970 Mercury Cougar Adjustable Clutch Rod for the 302 and 351 - Repro(Click Here for More Information or to Order) Price:$16.00
Clutch rod and adjusting nuts to ensure proper clutch operation.
|
|
|
 1969 - 1970 Mercury Cougar Clutch Pedal Spring Return Bracket - Repro(Click Here for More Information or to Order) Price:$30.00
Made of heavy gauge steel with a satin black painted finish.
|
|
|
 1967 - 1970 Mercury Cougar Clutch Pedal Spring Insulator - Repro(Click Here for More Information or to Order) Price:$5.50
Sale price: $3.00
Injection molded plastic stops underdash squeaking from clutch pedal return spring.
|
|
|
 1968 - 1970 Mercury Cougar Lower Clutch Release Rod for the 390GT, 428CJ and 428SCJ - Repro(Click Here for More Information or to Order) Price:$40.00
Fits the 1968, 1969, and 1970 Mercury Cougar with the 390GT, 428CJ or the 428SCJ
|
|
|
 1968 - 1973 Clutch Fork Retainer Clip Repair Kit(Click Here for More Information or to Order) Price:$13.00
Includes: 1 Spring Clip, 2 Stainless Steel Allen Head Screws, and 2 Stainless Steal Lock Nuts
|
|
|
 1967 - 1971 Mercury Cougar Lower Clutch Rod Adapter - Repro(Click Here for More Information or to Order) Price:$15.00
Fit the 1967, 1968, 1969, 1970 and 1971 Mercury Cougar with the 390, 428, 428CJ, 428SCJ, 429CJ or 429SCJ.
|
|
|
| 1970 Mercury Cougar Shift Boot (4SPD Hurst) - Repro (Click Here for More Information or to Order) Price:$21.85
..Has a steel insert just like the originals. Manual transmissions only.
Replaces Ford Part # D0ZZ-7277-B
|
|
