1971 Ford Mustang

Designed as a direct-fit OE-style replacement, this modulator valve will fit directly into the factory location of your current Cougar or Mustang valve. Also known as the throttle valve, this valve controls vacuum to the transmission as you press the gas pedal, and it will apply higher control pressure for better quality shifts at higher RPMs.

OE Steel Transmission Modulator Line for the 1971 Mercury Cougar & Ford Mustang with the 429 Cobra Jet and a C6 transmission.

Stainless Steel Modulator Vacuum Line for all V8 engines with a C6 transmission except 429CJ or the 351C with a 4 barrel carburetor.

Straight Monte Carlo Bar in a black finish for Mercury Cougar and Ford Mustang. The Monte Carlo Bar was originally developed by Carroll Shelby to help maintain proper wheel alignment under hard cornering.  It will also help reduce the chances that your shock towers will develop stress cracks over time. Note: Not for A/C or Convertible applications. This product will not clear the distributor or A/C Compressor.  Replaces Ford part # D1ZZ-16A052-A. "Times New Roman"">...

Reproduction power window motor for the driver side (left hand) door glass of the Mercury Cougar or Ford Mustang equipped with power windows. This unit is for the 69-73 Mercury Cougar, but only years 1971-73 for the Mustang. This is the same motor that found it's way into most all other Ford/Lincoln/Mercury cars in that year range as well. If you need the rear pancake style motor, you can find that here.*NOTE* This is the only version of the power window motor that is available at the moment....

Used power window motor for the Driver side (left hand) door glass of the Mercury Cougar or Ford Mustang equipped with power windows. This unit is for the 69-73 Mercury Cougar, but only years 1971-73 for the Mustang. This is the same motor that found it's way into most all other Ford/Lincoln/Mercury cars in that year range as well. If you need the rear pancake style motor, you can find that here. ...

Reproduction power window motor for the passenger side (right hand) door glass of the Mercury Cougar or Ford Mustang equipped with power windows. This unit is for the 69-73 Mercury Cougar, but only years 1971-73 for the Mustang. This is the same motor that found it's way into most all other Ford/Lincoln/Mercury cars in that year range as well. If you need the rear pancake style motor, you can find that here. *NOTE*  This is the only version of the power window motor that is available at...

Used power window motor for the passenger side (right hand) door glass of the Mercury Cougar or Ford Mustang equipped with power windows. This unit is for the 69-73 Mercury Cougar, but only years 1971-73 for the Mustang. This is the same motor that found it's way into most all other Ford/Lincoln/Mercury cars in that year range as well. If you need the rear quarter window pancake style motor, you can find that here. ...

NOS big block motor mount. Left is the same as right, sold individually. This isolator is used with the 390, 427, 428 and 429 Cobra Jet engines.  Sold individually. Ford Part #: D1ZZ-6038-A.

Nice reproduction of an obsolete motor mount. Left is the same as right, sold individually. This isolator is used with the 390, 427, 428 and 429 Cobra Jet engines.  Sold individually. Replaces Ford Part #: D1ZZ-6038.

Keep in mind that if you have the original motor mounts in your 1967 with a 289 or 1969-1970 convertible these mounts will not work. Nobody sells motor mounts for them, period. This is contrary to what every auto parts store will tell you. Your options are to purchase our (used 68-70 frame stands) or modify your existing ones.Sold individually, two required per car, left is the same as right.

Restored passenger side (right hand) windshield moulding / trim for the Mercury Cougar or Ford Mustang coupe. This unit has been restored using the correct bright dip anodize and will look better than NOS.  Ford part # D1ZZ-6503144-A.

Nice reproduction of the convertible boot moulding for the 1971 - 1973 Ford Mustang, but also works on the 1971 - 1973 Cougar. *The Cougar originally would have had a different contour and a painted black stripe down the length of the moulding.

This listing consists of 2 L shaped die cast side mouldings and one rear stainless moulding. We require clean cores for exchange prior to shipping. CORES MUST HAVE CLIPS AND STUDS IN PLACE. If you are in question as to whether your cores are acceptable or not, please send us several digital pictures. These differ from Mustang in that the Cougar has the center portion recessed with black semigloss paint. Our restored mouldings do not have the paint applied. The ford casting numbers as seen...

REQUIRES sending your cores in advance.This is a restored aluminum hood trim from an early 1971 Mercury Cougar or Ford Mustang. Rear of hood trim Ford part # D1ZZ-16B918-A. Our restored aluminum trim is correctly bright dipped or anodized like originals.Technically this trim piece was only used during the first 6 months of production on 1971 Mercury Cougar and all XR7 models including  convertibles. 1971 Ford Mustang. These will fit all third generation years 1971-73 Mercury Cougar...

Our core driver (left hand) lower rear aluminum window mouldings / trim will have some scratches and dings and are suitable for restoration. We will not send you kinked or gouged trim as it is not feasible to restore heavily damaged trim.Ford part # D1ZZ-6542405-A.

Our used driver (left hand) lower rear aluminum window mouldings / trim will have light scratches and minor dings. These are suitable for restoration or for a lower quality daily driver. We will not send you kinked or gouged trim as it is not feasible to restore heavily damaged trim. Ford part # D1ZZ-6542430-A.

Our core driver (left hand) upper rear aluminum window mouldings / trim will have some scratches and dings and are suitable for restoration. We will not send you kinked or gouged trim as it is not feasible to restore heavily damaged trim.Ford part # D1ZZ-6542431-A.

Our used driver (left hand) upper rear aluminum window mouldings / trim will have light scratches and minor dings. These are suitable for restoration or for a lower quality daily driver. We will not send you kinked or gouged trim as it is not feasible to restore heavily damaged trim. Ford part # D1ZZ-6542430-A. ...

Our core passenger (right hand) lower rear aluminum window mouldings / trim will have some scratches and dings and are suitable for restoration. We will not send you kinked or gouged trim as it is not feasible to restore heavily damaged trim.Ford part # D1ZZ-6542404-A.

Our used passenger (right hand) side lower rear aluminum window mouldings / trim will have light scratches and minor dings. These are suitable for restoration or for a lower quality daily driver. We will not send you kinked or gouged trim as it is not feasible to restore heavily damaged trim. Ford part # D1ZZ-6542404-A.

Our core passenger (right hand) upper rear aluminum window mouldings / trim will have some scratches and dings and are suitable for restoration. We will not send you kinked or gouged trim as it is not feasible to restore heavily damaged trim.Ford part # D1ZZ-6542430-A.

Our used passenger (right hand) side upper rear aluminum window mouldings / trim will have light scratches and minor dings. These are suitable for restoration or for a lower quality daily driver. We will not send you kinked or gouged trim as it is not feasible to restore heavily damaged trim. Ford part # D1ZZ-6542430-A.

This is the stainless steel trim for the front of the boot that attaches to the upper, back side of the back seat in a 1971 to 1973 Cougar and Ford Mustang. This is a very hard part to come by in good shape.

Stainless trim that affixes to the leading edge of the quarter window on coupe or convertible. Does not come with weather strip.

Used grade "B" driver side (left hand) vertical glass trim window glass for the Mercury Cougar or Ford Mustang coupe or convertible. This stainless steel trim will have light scuffing or scratches, primarily on the outside surface. Plan on purchasing new rubber weather stripping. Will not fit Mustang fastback (Sport Roof) models. Ford part @ D1ZZ-6529953-A.

Stainless trim that affixes to the leading edge of the quarter window on coupe or convertible.

Used passenger side (right hand) grade B vertical glass trim for the window glass of the Mercury Cougar or Ford Mustang both coupe and convertible. This stainless steel trim will have light scuffing or scratches, primarily on the outside surface. Plan on purchasing new rubber weather stripping. Will not fit Mustang fastback (Sport Roof) models.Ford part # D1ZZ-6529952-A.

Restored pair of windshield mouldings / trim for the Mercury Cougar or Ford Mustang coupe. These units have been restored using the correct bright dip anodize and will look better than NOS.  Ford part # driver side D1ZZ-6503145-A, passenger side D1ZZ-6503144-A.

Core driver side (left hand) windshield moulding / trim for the Mercury Cougar or Ford Mustang coupe. This unit may have some dings, scratches and will be dull. A cheap and easy fix for your cat or pony that may have missing windshield trim. Ford part # D1ZZ-6503145-A. 

Used driver side (left hand) windshield moulding / trim for the Mercury Cougar or Ford Mustang coupe. The bright dip anodize has worn off of this unit and it may have some very fine scratches, but will not be dented or have any heavy scratching. Suitable for your daily driver or for restoration.  Ford part # D1ZZ-6503145-A.

Core pair of windshield mouldings / trim for the Mercury Cougar or Ford Mustang coupe. These units may have some dings, scratches and will be dull. A cheap and easy fix for your cat or pony that may have missing windshield trim.  Ford part # driver side D1ZZ-6503145-A, passenger side D1ZZ-6503144-A.

Reproduction pair of windshield mouldings / trim for the Mercury Cougar or Ford Mustang coupe. Replaces Ford part #'s driver side D1ZZ-6503145-A, passenger side D1ZZ-6503144-A.

Used pair of windshield mouldings / trim for the Mercury Cougar or Ford Mustang coupe. The bright dip anodize has worn off of these and they may have some very fine scratches, but they will not be dented or have any heavy scratching. Suitable for your daily driver or for restoration.Ford part # driver side D1ZZ-6503145-A, passenger side D1ZZ-6503144-A.

Core passenger side (right hand) windshield moulding / trim for the Mercury Cougar or Ford Mustang coupe. This unit may have some dings, scratches and will be dull. A cheap and easy fix for your cat or pony that may have missing windshield trim.  Ford part # D1ZZ-6503144-A.

Used passenger side (right hand) windshield moulding / trim for the Mercury Cougar or Ford Mustang coupe. The bright dip anodize has worn off of this unit and it may have some very fine scratches, but will not be dented or have any heavy scratching. Suitable for your daily driver or for restoration.  Ford part # D1ZZ-6503144-A.

This is the "Chrome" trim across the top of the windshield on the inside. This piece will need to be sandblasted and repainted. Many people have chromed these, but because of Federal safety regulations from the factory they were painted satin silver.Ford Part Number: D1ZZ-7603606-A.

Our core aluminum rear window mouldings / trim will have scratches and dings and are suitable for restoration. This kit consists of one driver side (left hand) upper, one passenger side (right hand) upper, one driver side lower, and one passenger side lower core window moulding / trim. These original FoMoCo mouldings are far superior to the off shore reproductions that do not fit well and have an incorrect color to them. We will not send you kinked or gouged trim as it is not feasible to...

Reproduction four piece aluminum rear window moulding / trim set for the 71 - 73 Cougar or Mustang. Customers have mentioned that these are very hard to install on the Cougar. Ford part #s D1ZZ-6542405-A, D1ZZ-6542404-A, D1ZZ-6542430-A, D1ZZ-6542431-A.

Restored four piece aluminum rear window moulding / trim set correctly restored with an anodized and a bright dip finish and polished to a very high luster.Ford part #s D1ZZ-6542405-A, D1ZZ-6542404-A, D1ZZ-6542430-A, D1ZZ-6542431-A.

Good used four piece aluminum rear window moulding / trim set with some dings and or minor scratches. Ready to install on your Cougar as is, or polish them to be installed on a daily driver. These original FoMoCo mouldings are far superior to the off shore reproductions that do not fit well and have an incorrect color to them. Ford part #s D1ZZ-6542405-A driver side (left hand) lower, D1ZZ-6542404-A passenger side (right hand) lower, D1ZZ-6542430-A passenger side upper, and D1ZZ-6542431-A...

NOTE: Some modification required to fit Cougars! These are actually 69-70 Mustang wheel lip mouldings, which have a different shape / contour. However, with a bit of massaging they can be made to fit the 71 - 73 Cougar. They are the closest alternative we have found that fits and looks reasonably good for much less than restored originals. Check out our video below, showing how easy it is to install these mouldings on a Cougar ...

Original sway bar mount for your 1971-73 Mercury Cougar or Ford Mustang. Nice original, removed from our better cars. Metal cleanup needed, we cut these a little generously to protect the bracket. Original part number is 5A483. The MPC and other manuals refer to this bracket as: reinforcement and mounting bracket for front stabilizer bar. One per side, right and left are the same. See related items.  

According to the MPC 1970 primarily, a few 1971-1973's. If you have a hardtop or coupe, (VIN numbers starting with either 0F91 or 0F93) and standard wheels with hub caps. Or, any 1971 - 1973 with style steel wheels. Total length is 6-1/4 inches, with 4 inches being threaded. Threads 1/2-13. We find this bolt to only have 2 1/2" of threads. More data is needed as the MPC is not reliable on these items. What do you have in your trunk? We want to know! Search words 70 71 72 73 1972

1971 - 1973 Mercury Cougar hard tops and coupes with regular steel wheels and hub caps. J bolt total length listed in MPC is 8-3/4 inches, with 6-1/2 inches threaded on the straight end but we find the actual length to be 10" long with about 4" of threads. We also see this used with the 1971 - 1973 Kelsey Hayes Styled Steel wheel even though the MPC lists another size. There are absolutley to absolutes when it comes to items like these and what Ford "may" have called for. Would love to hear...

Cast iron pedestal mount for the air conditioning compressor on all 1970 - 1973 Mercury Cougars and Ford Mustangs with the 351C engine, both the H code 351-2V and M code 351-4V engines. Ford MPC part # D0ZA-2882-C.

Used alternator mounting bracket for any 1970-73 Mercury Cougar, Ford or Ford Mustang with 302, 351W, or 351C engines. Replaces Ford part number D0OE-10156-A.

Used rear alternator mounting bracket for 1971 Ford cars with 351W engines. This part is made from cast iron, there is also a cast aluminum version.Replaces Ford part number D1OE-10A336-AA.