All Products

This reproduction rear side marker light will fit on either the right or left side of your Cougar.Studs included.Replaces Ford Part #: D0ZZ-15201-R.

Reproduction passenger side (right hand) sport mirror lens for the Mercury Cougar or Ford Mustang and Torino.The mounting screw, that holds the mirror assembly in, is not included by default but is an optional addon. Replaces Ford part # C9AZ-17698-B. Dimensions: 4 7/16" x 2 15/16" This version does NOT include the wording "objects in mirror are closer than they appear". We also sell the version with the wording. Do you have questions about installing a passenger side mirror or using...

Reproduction convex lens for a passenger side manual adjust mirror. Found on all FoMoCo products utilizing a manual mirror 1969 - 1973. The remote mirror lens assemblies found on many 1970's Ford products do not interchange with the manual "Bullet Style" mirrors. The screw that holds the mirror assembly in, is not included by default but is an optional addon. Replaces Ford part # C9AZ-17698-B This version included the words "objects in mirror are closer than they appear". We also sell the...

Lens with mounting hardware only for a passenger side manual adjust mirror. Found on all FoMoCo products utilizing a manual mirror 1969 - 1973. The remote mirror lens assemblies found on many 1970's Ford products do not interchange with the manual "Bullet Style" mirrors. Count on the glass being scratched. The value here is in adjustment / mounting hardware. This unit will be guaranteed to keep its adjustment and not be loose like many have become over the years. Keep in mind this item is...

Used on both the speedometer and tachometer lens. Comes with plastic keeper / washer that connects it from the backside of the lens. Sold individually, two required per cluster. These are in used condition as shown and need restoration. This item may require epoxy. The mounting stud on rear may not be present. It is plastic and originally melted over.

These clips are used to hold the lenses in place on your cluster. Sold as a set of three.

Used parking / emergency light warning light lens spring for the 1967 - 1968 Mercury Cougar.Spring only, lens sold separately. 

Reproduction reverse (back up) light lens set for the Mercury Cougar. These reproductions do not have the Ford insignia, and are therefore cheaper than the other versions on the market. Fit and finish is very good. This set includes the driver side / left hand lens and the passenger side / right hand lens, with correct grey gaskets. Replaces Ford part # C9WY-15514-B (driver side / left hand lens), C9WY-15514-A (passenger side / right hand lens), and C9WY-15510 (gasket...

Sold as a pair, made from original Ford tooling. Show quality with correct FoMoCo logo and numbering, perfect fit. These will fit 1970 Cougar but do not have the same distorted appearance. Applications for 1969 Mercury Cougar, 1969-70 Mustang Shelby GT350 and GT-500. This is also the lens for 1970 Ford Mustang with the sport lamp option. Replaces part # C9WY-13208-A and C9WY-13209-A. *NOTE* Need help diagnosing a Cougar turn signal problem? Victor Yarberry is the world’s most knowledgeable...

Door lock latch lever, for driver or passenger side locks. Attach with an "E" clip on the rear side of the lock mechanism. Used "E" clip is included. We are going to say that these fit all Ford door locks 1965 through 1973 and beyond. *Note you will need to purchase or reuse your retainer clip for attaching the lock rod. Retainer clip not included, we have good used or reproduction clips, see related items.Ford number stamped C5AB-6221970-A or D2AB-6221970-AA  ...

These plates were really clean before they were sent out for restoration, you can get  your Oregon plates restored at http://oregonplates.com/NOTE: The plates and plate numbers pictured are exactly what you'll receive.

NOTE: This is a blemished (blurred) license plate. We're selling these at close to nothing for anyone who wants to use the backside for custom painting. The graphics were printed blurry...you can't tell from a distance but up close they're not high quality prints (see photos above).  This classy aluminum license plate features the WCCC running cat logo on a matte black background, with a slightly grainy texture. Works great for display at car shows, everyday beautification (in states...

Give your Cougar or Mustang that cool, classic look by adding these replica California black and gold license plates. These plates are favored by classic car owners everywhere, because they signify a rust free, restored classic car. These plates are real stamped aluminum with raised numbers and letters. Sold Individually.

Give your Cougar or Mustang that cool, classic look by adding these replica California black and gold license plates. These plates are favored by classic car owners everywhere, because they signify a rust free, restored classic car. These plates are real stamped aluminum with raised numbers and letters. Sold Individually.

Give your Cougar or Mustang that cool, classic look by adding these replica California black and gold license plates. These plates are favored by classic car owners everywhere, because they signify a rust free, restored classic car. These plates are real stamped aluminum with raised numbers and letters. Sold Individually.

NOTE: This is a misprinted license plate, please see photos above. The holes were accidentally printed over the real holes giving it a double blurred look (the Cougar graphic is fine). We're selling these at close to nothing for anyone who wants to grab a bunch as gifts or collectibles!  This classy aluminum license plate features the WCCC running cat logo on a matte black background, with a slightly grainy texture. Works great for display at car shows, everyday beautification...

Reproduction Replacement for the Rear License Plate Lens for the 1969 - 1973 Mercury Cougar or Ford Mustang.  We also have good used original OEM lens that can easily be cleaned to look as good as these Chinese reproductions. Replaces Ford part #: C4AZ-13564.

This part is what holds on 1969 - 1973 Mercury Cougar / Ford Mustang Rear License Lamp Lens.  Replaces Ford part # C5OZ-13566-B or C4AZ-13564-A.

Used license plate holder and fuel door for all 1967-68 Mercury Cougars. Comes as shown, hinges inspected, will include used or new license plate plastic inserts. See our list of related parts, will need rubber bumpers.Replaces Ford part number C7WB-13393.

17A385 Front license plate mounting bracket, fastens to the center of a 1973 Mercury Cougar front bumper. Bottom steel bracket only. 

Used rear license plate bracket that attaches to the rear bumper of all 1969-70 Mercury Cougars. Comes as shown, hardware included. These originally were painted chassis black.Replaces Ford part number C9WY-17A385-A.

1973 Mercury Cougar plastic top license plate bracket. This mounts to the bumper beam and the top most portion sticks through the window of the bumper. This top bracket holds the top section of the license plate in the lip. Very hard to find, delicate one year only. Ford part # D3WY-17A385-B

1973 Mercury Cougar top, plastic license plate bracket. This mounts to the bumper beam and the top most portion sticks through the window of the bumper. This top bracket holds the top section of the license plate in the lip.

Sold individually.

Reproduction license plate frame for your Mercury Cougar.  Sold individually. Note: These will not clear on the rear pull down fuel door on the 1967- 1968, so they will only work for the front license plate on the 67-68 Cougar. These can be used for front or back on the 69-73 Cougar.Check out this video of our 2013 Open House event. Se you next year! ...

Pair of reproduction license plate frames bearing the name of the original Lincoln / Mercury dealer lot in Inglewood, California.  Chrome frames with the city and dealer name written in/on reflective material. Sold only as a pair.

Pair of reproduction license plate frames bearing the name of the original Lincoln / Mercury dealer lot in Portland / Beaverton, Oregon.  Chrome frames with the city and dealer name written in/on reflective material. Sold only as a pair.

Pair of reproduction license plate frames bearing the name of the the original Lincoln / Mercury dealer lot in San Jose, California.  Chrome with the city and dealer name written in/on reflective material. Sold only as a pair.

All new lamp housing with glass lens, bulb, wiring pigtail, and with rubber body plug. Fits all 1971-73 Mercury Cougars has extended wiring pigtail to accommodate the 1973 cars.

Good used license plate light socket and wiring pigtail from a 1967-68 Mercury Cougar. Good socket without damage or corrosion. We cut the single wire pigtail as close to the main tail light harness as possible. Easy single wire splice for the DIY Cougar owner.

Restored rear license lamp assembly for all 1969-70 Mercury Cougars. Plated and restored lamp housing with original glass lens, new gasket, bulb, and wiring pigtail with integral rubber body plug.

Lamp housing with original glass lens, wiring pigtail, and with rubber body plug. Driver quality part. Bulbs available. We often find damaged wires with these lights left on our rear bumper cores. Guaranteed to work with no cuts or splices. Different than the 1973 version due to the bumper mounting brackets.Ford number D1WY-13550-A.

Lamp housing with original glass lens, wiring pigtail, and with rubber body plug. Driver quality part. Bulbs available. We often find damaged wires with these lights left on our rear bumper cores. Guaranteed to work with no cuts or splices. Different than the 1971-72 version due to the bumper mounting brackets. This 1973 light assembly has a 1-1/2 inch longer wire lead.Ford part number D3WY-13550-A.

This lid is about 17-1/2 inch in diameter. Identified by the wagon wheel like spokes in the stamping. 1967 Mercury Cougar and Ford Mustang with 289 engines. Additionally this lid was used for the Canadian export Cougars and Mustangs in 1968, they continued to use the open emissions system.

This lid is about 17-1/2 inch in diameter. Identified by the wagon wheel like spokes in the stamping. 1967 Mercury Cougar and Ford Mustang with 289 engines. Additionally this lid was used for the Canadian export Cougars and Mustangs in 1968, they continued to use the open emissions system. Nice clean lid with no holes or other noticeable damage.

Chromed air cleaner lid for all 1973 H code 351-2V engines. About 14.75 inches in diameter. Ford part number for the air cleaner assembly is D3ZZ-9600-A. The air cleaner lid by itself doesn't have a number. This air cleaner lid was never chromed from the factory.

This Ford engine blue painted lid, is about 16-3/4 inch in diameter. Identified by the spokes in the stamping. We get these lids with and without a center ring underneath. The ring can be removed with a bit of effort if you desire. There is a chromed version of this air cleaner lid that was found on 1967 and 1969 Mercury Cougar and Ford Mustang with S code 390-4V engines. Additionally this lid was used on 1969-70 Q code 428CJ or non-ram air Cougars and Mustangs. We believe that this lid was...

This lid was also used on the Hi-Po small block Mustang. The painted version is what you will find for the inner lid on the 68-71 Cougars equipped with Ram Air.

Concourse correct reproduction chrome GT air cleaner lid for the Mercury Cougar and Ford Mustang equipped with either the Boss 302, GT 390, or 428 CJ engine without the shaker option. This is an extremely hard piece to find used, and even rarer in NOS form, but now we can offer you this new unit that is made from the original tooling! It was possible to order a 390 GT motor for your Cougar without ordering the 390 GT package. Cougars equipped with the S code 390 6.5 Litre engine,...

This rechromed lid is found on many years and cars 1968 - 1971. The diameter of the lid is just over 17 3/4", fits on 17.84" air cleaner bases. Application Mercury Cougar Ford Mustang 302 and 351 engines without ram air. Ford / Mercury have had various part numbers listed for this basic lid over the years. The primary difference was the original lids included an engine size sticker. That is why there are so many listings, the basic part number is 9661. This lid was chromed in several...

This was the inner air cleaner lid used on the Mercury Cougars equipped with a 428 Ram Air Cleaner or 429 Cobra Jet Ram Air Cleaner assembly. Although you will often find chrome under the blue engine paint on these lids they are in fact supposed to be painted from the factory. This lid is 14-1/8 inches in diameter. The reason you will often see chrome underneath the paint is that this is the same lid used on the 1967 427 GTE, 289 HiPo equipped early Mustangs and 390 GT / GTA Fairlanes and...

This particular mid-plate has a seemingly factory installed tab welded to the backside.  This unit was not found on a 1968 Mercury Cougar but does have the wrinkles indicative of a 68 lid.  The tab located at 12 o'clock makes it rather difficult to install the Air Cleaner to hood seal. If anyone can clue us in to the exact application of this oddball part please chime in!  Check out: http://428cobrajet.org/id-air-cleaner-68.html to learn more about the subtle differences between...

This lid is found on many years and cars 1968 - 1971. The diameter of the lid is just over 17 3/4", fits on 17.84" air cleaner bases. Application Mercury Cougar Ford Mustang 302 and 351 engines without ram air. Ford / Mercury have had various part numbers listed for this basic lid over the years. The primary difference was the original lids included an engine size sticker. That is why there are so many listings, the basic part number is 9661. This lid was chromed in several applications,...

This Grade A quality ashtray lid was located at the rear of the console and was used on all 1967 - 1968 Mercury Cougars except the 1967 standard model and the 1968 XR7G. This ashtray differs from other ashtrays you will see on various Ford products in that it has a brushed finish and a slightly taller lower section. The removable ash receptacle is sold separately.Ford part # C7AZ-6330714-A.

This Grade B quality ashtray lid was located at the rear of the console and was used on all 1967 - 1968 Mercury Cougars except the 1967 standard model and the 1968 XR7G. This ashtray differs from other ashtrays you will see on various Ford products in that it has a brushed finish and a slightly taller lower section. The removable ash receptacle is sold separately.Priced as driver quality units, most will have light pitting or scratches as shown.Ford part # C7AZ-6330714-A.

Nice reproduction 1967-68 Mercury Cougar console light housing with lens cover. Plug and play with wiring. Click on images to enlarge. ...

Pit free original rear console courtesy light for all consoles 67-68, does not usually come with a good lens as most are cracked, faded or missing. Casting number as seen on the back reads C7ZB-13743-A. Number imprinted on wire can be: C4VB-13757-A.

This engine compartment lamp assembly includes lamp socket, bracket, mercury switch, and length of wire. A bit of investigation shows us that an inline fuse was used on the single wire and it has an amp rating of 7.5 amps.Replaces part # C9WY-15702-A