All Products

Used passenger side (right hand) lower rear bumper bracket for any model of 1973 Mercury Cougar.Ford part # D3WY-17787-A.

D1WY-17787-A Rear bumper bracket for any 1971-72 Mercury Cougar, passenger side only.

Complete five piece set includes the horizontal support as well as the two braces inside the trunk, two brackets that bolt to the bumper and hardware. Checked closely for bends, cracks and stripped threads. What is pictured is the best of what we have, we also have B grade sets that will clean up fine. Pair of inside the trunk bumper mounting brackets D1WY-17A750-A. Passenger side bumper bracket D1WY-17787-A, driver side bumper bracket D1WY-17788-A. Rear bumper center reinforcement beam...

Used upper rear bumper bracket for any 1973 Mercury Cougars. Right and left are the same, two needed per car. Ford part number D3WY-17A750-A.

Sold individually, two required per car. Right is the same as left. These Western rear bumper brackets are not heavily rusted, the threads are in perfect shape and they are not bent. Master part number C7WY-17A750-A.

C9WY-17A750-A Sold individually, two required per car. Right is the same as left. These Western rear bumper brackets are not heavily rusted, the threads are in perfect shape and they are not bent.

Complete five piece set includes the horizontal support as well as the two braces inside the trunk, two brackets that bolt to the bumper and hardware. Checked closely for bends, cracks and stripped threads. What is pictured is the best of what we have, we also have. These B grade sets will clean up, but have some slight surface rust. Pair of inside the trunk bumper mounting brackets D1WY-17A750-A. Passenger side bumper bracket D1WY-17787-A, driver side bumper bracket D1WY-17788-A. Rear bumper...

Complete five piece set includes the horizontal support as well as the two braces inside the trunk, two brackets that bolt to the bumper and hardware. Checked closely for bends, cracks and stripped threads. What is pictured is the best of what we have, we also have. These B grade sets will clean up, but have some slight surface rust. Pair of inside the trunk bumper mounting brackets D3WY-17A750-A. Passenger side bumper bracket D3WY-17787-A, driver side bumper bracket D3WY-17788-A. Rear bumper...

Good used set of crack free, bend free original brackets. These are Western parts that have never been exposed to road salt and can easily be restored to show quality standards.

Good used set of crack free, bend free original brackets. These are Western parts that have never been exposed to road salt and can easily be restored to show quality standards.

Good used set of crack free, bend free original brackets. These are Western parts that have never been exposed to road salt and can easily be restored to show quality standards. Kit includes: right and left inner bumper brackets, right and left outer brackets, front beam (missing from picture), and center bumper reinforcing bracket.

D1WY-17C838-A Deflector or driver side bumper filler, 1971-72 Mercury Cougar.

New Old Stock driver side bumper filler. These 73 side fillers are made of a rubber material as opposed to plastic like the 71-72. 1973 is also different than 71-72 in that 1973 brought about new federal crash requirements. The 73 model has the bumper spaced further out which makes all three of the rear bumper fillers wider. 1973 has longer rear bumper brackets than 1971-72. Mercury master part number D3WY-17C838-A, also called a deflector, would be painted body color.

These 73 side fillers are made of a rubber material as opposed to plastic like the 71-72. 1973 is also different than 71-72 in that 1973 brought about new federal crash requirements. The 73 model has the bumper spaced further out which makes all three of the rear bumper fillers wider. 1973 has longer rear bumper brackets than 1971-72. Mercury master part number D3WY-17C838-A, also called a deflector, would be painted body color.

D1WY-17C837-A Deflector or passenger side bumper filler, 1971-72 Mercury Cougar. This icon means that we're looking to buy this part!WCCC is a buyer of used and NOS hard to find 67-73 Mercury Cougar parts. Usually we give an in store credit of 50% of our web price for parts delivered in hand or by carrier to our Brooks, Oregon location. If you're not interested in store credit, just shoot us an email and we will let you know if it's is something we can pay cash for. We do not send cash for...

D1WY-17C837-A Deflector or passenger side bumper filler, 1971-72 Mercury Cougar.

These 73 side fillers are made of a rubber material as opposed to plastic like the 71-72. 1973 is also different than 71-72 in that 1973 brought about new federal crash requirements. The 73 model has the bumper spaced further out which makes all three of the rear bumper fillers wider. 1973 has longer rear bumper brackets than 1971-72. Mercury master part number D3WY-17C837-A, also called a deflector, would be painted body color.

Rear bumper filler for any 1973 Mercury Cougar.No chips or cracks. Does not come with fasteners or clips.See related items for new aftermarket style clips for attaching, 8 total are needed.Replaces Ford part number D3WY-17808-A .* Note - Will not fit 1971-72 Mercury Cougar.

This money saving kit gives you all four rubber bumper fillers that wedge into the 67-8 front and rear bumpers horizontally (the triangular ones) as well as the vertical ones that fasten to the leading edge of the fenders and quarters. Keep in mind when you remove the old rubber parts that we can give in-store credit for reusable parts. Please only send us parts that are not ripped, gouged or warped.

Replaces Ford part #C9WY-16B554/5. Good quality part made with correct type of rubber. Sold as pair only.

Used driver side (left hand) bumper guard for the Mercury Cougar. The chrome platting was pretty low quality back in the day and this unit will have some scratches and pitting in the chrome. Ford part # D1WY-17797-A for the driver side. Keep in mind we are always in need of: 69 Front Bumper Cores70 Front Bumper Cores1971 - 1972 Front without Bumper Guard Holes1973 Front Bumper Cores without the holes for the horizontal black rubber impact strip If you have extras of any of these bumpers,...

Used driver side (left hand) bumper guard for the Mercury Cougar. The chrome platting was pretty low quality back in the day and this unit will have some scratches and pitting in the chrome. Will not come with rubber bumper guard pad, pad sold separately. Ford part # D3WY-17797-A for the driver side. Keep in mind we are always in need of: 69 Front Bumper Cores70 Front Bumper Cores1971 - 1972 Front without Bumper Guard Holes1973 Front Bumper Cores without the holes for the horizontal black...

This optional front bumper guard was unique to the 1969-70 Mercury Cougar. These are sold individually and the passenger side (right hand) is the same as the driver side (left hand). Show quality, better than NOS. These are rather rare so they each carry a $125 core charge. Ford part Number: C9WY-17996-A. ...

Used passenger side (right hand) bumper guard for the Mercury Cougar. The chrome platting was pretty low quality back in the day and this unit will have some scratches and pitting in the chrome. Ford part # D1WY-17796-A for the passenger side. Keep in mind we are always in need of: 69 Front Bumper Cores70 Front Bumper Cores1971 - 1972 Front without Bumper Guard Holes1973 Front Bumper Cores without the holes for the horizontal black rubber impact strip If you have extras of any of these...

Used passenger side (right hand) bumper guard for the Mercury Cougar. The chrome platting was pretty low quality back in the day and this unit will have some scratches and pitting in the chrome. Will not come with rubber bumper guard pad, pad sold separately. Ford part # D3WY-17796-A for the passenger side. Keep in mind we are always in need of: 69 Front Bumper Cores70 Front Bumper Cores1971 - 1972 Front without Bumper Guard Holes1973 Front Bumper Cores without the holes for the...

Used driver side (left hand) rear bumper guard for the Mercury Cougar. The chrome plating was pretty low quality back in the day and this unit will have some scratches and pitting as it is an almost 50 year old original part. Mounting diagram not included, if you need one CLICK HERE for a printable version. Ford Part #: C7WY-17985-A. *NOTE* Driver side is stamped with an "L" on the backside. ...

Used passenger side (right hand) bumper guard for the Mercury Cougar. The chrome platting was pretty low quality back in the day and this unit will have some scratches and pitting as it is an almost 50 year old original part. Mounting diagram not included, if you need one CLICK HERE for a printable version. Ford part # C7WY-17984-A. *NOTE* Passenger side is stamped with an "R" on the backside. ...

These hard rubber bump strips attach to the front bumper guards with 2 studs from the back side. Extreme care is needed prior to attempting to remove them. If you force the nut from the backside you will dislodge the stud from the rubber. For best results use a small wire brush on the studs first and soak liberally with a product like PB Blaster. Sold individually, right is the same as left, Ford Casting number as found on the back is D1WB-17A812-AB

This option includes paying a core charge. By choosing this option, the re-chromed item you receive will have started the re-chroming process as an average quality core.We highly recommend that you send us your core first. Here's why: We can core match your bumper guards. Bumpers guards that are re-chromed using a superior quality core are always reserved for core matching. If your core is average or below average, you may be able to pay to upgrade to a re-chromed bumper that started the...

This option includes paying a core charge. By choosing this option, the re-chromed item you receive will have started the re-chroming process as an average quality core.We highly recommend that you send us your core first. Here's why: We can core match your bumper guards. Bumpers guards that are re-chromed using a superior quality core are always reserved for core matching. If your core is average or below average, you may be able to pay to upgrade to a re-chromed bumper that started the...

This options includes the core charge, but there are advantages of sending cores in advance:Advantages of Pre-Sending Cores: - We core match your Bumper Guards. We recommend you pre-sending your core if you have a good quality core, as our A grade Bumper Guards are always reserved for core matching. If your core is not a grade A core, you may be able to pay a charge to upgrade to a higher grade re-chromed Bumper Guards.- Ships after we receive and inspect your Bumper Guards core, avoiding...

This option includes paying a core charge. By choosing this option, the re-chromed item you receive will have started the re-chroming process as an average quality core.We highly recommend that you send us your core first. Here's why: We can core match your bumper guards. Bumpers guards that are re-chromed using a superior quality core are always reserved for core matching. If your core is average or below average, you may be able to pay to upgrade to a re-chromed bumper that started the...

Rear bumper guards and all the parts needed to install rear bumper guards on your 1967 - 1968 Mercury Cougar. Kit Includes:2 Rear Bumper Guards that have been triple plated to a level far beyond NOS standardsthe mounting kit consists of:a reproduction pair of bracketsnew fasteners. Mounting diagram not included, if you need one CLICK HERE for a printable version. No core exchange is required for this purchase. *NOTE* As is often the case, service replacement parts are painted and the...

This option includes paying a core charge. By choosing this option, the re-chromed item you receive will have started the re-chroming process as an average quality core. We highly recommend that you send us your core first. Here's why: We can core match your bumper guards. Bumpers guards that are re-chromed using a superior quality core are always reserved for core matching. If your core is average or below average, you may be able to pay to upgrade to a re-chromed bumper that started the...

This option includes paying a core charge. By choosing this option, the re-chromed item you receive will have started the re-chroming process as an average quality core. We highly recommend that you send us your core first. Here's why: We can core match your bumper guards. Bumpers guards that are re-chromed using a superior quality core are always reserved for core matching. If your core is average or below average, you may be able to pay to upgrade to a re-chromed bumper that started the...

D3WY-17A820-A This is one of the end brackets that mounts the outer bumper shell to the bumper beam. "L" shaped bracket, most have a stamped number of 4928A01 on them. Sold individually, 2 needed per bumper.

Complete front and rear bumper mounting hardware for the 1970 Mercury Cougar.

Reproduction Bumper Retainer for the 1967 - 1968 Mercury Cougar or Ford MustangSold individually 

This is a metal "C" channel that glues to the bottom center of the glued-in door glass on 1969 and early 1970 Mercury Cougar and Ford Mustangs. This channel, helps protect the glass when lowered to the rubber stop at the bottom of the door. Ford part # C9ZZ-214A16-A. *HINT* Use the same professional grade of glass adhesive that you use for bonding the door glass to the two glass mounting brackets. Do you have questions about Glue-In vs Bolt-In glass? How about how to properly install Glue-In...

Sold individually, four required per car. Replaces Ford part #: C7AZ-5426528.

Four per car, mounts to fender. Sold individually. Replaces Ford part #: C7WY-16758.

Sold individually, four per car, mounts to fenders. Replaces Ford part #: C6OZ-16758.

New Old Stock rubber hood bumper. Fits all 1967-68 Mercury Cougar and Ford Mustang including Shelby GT-350 and GT-500. Replaces Ford part #: C7WY-16758-A.

Four per car, mounts to fenders. Replaces Ford part #: C7WY-16758.

Four per car, mounts to fenders. Replaces Ford part #C6OZ-16758.

Reproduction license plate / fuel door cover rubber bumpers for the Mercury Cougar or Ford Mustang. These will also work for the 1969-70 Mercury Cougar or Ford Mustang cowl cover to hood rubber bumpers. Sold as a pair with the mounting screws. *NOTE* These are not an exact replacement, rather a part from another year and application that has been found to be an adequate substitution. If you really need an exact replacement we sometimes can provide a used bumper. ...

These Radiator Hood Support Bumpers reproductions are sold as a pair. They fit the 67, 68, 69, 70, 71, 72, and 73 Mercury Cougar. Replaces Ford part #: C5ZZ-16763.

These stainless steel radiator hood support bumper reproductions are sold as a pair. They fit the 67, 68, 69, 70, 71, 72, and 73 Mercury Cougar. Replaces Ford part #: C5ZZ-16763.