All Products

Great investment considering how easy it is to mar your switch, bezel or dash paint when trying to remove your ignition switch bezel with a hammer and screw driver. Black, basic handle tool removes and installs headlight switch bezels. When coupled with ignition bezel tool it removes and installs ignition switch bezels on any 1967-68 Mercury Cougar and Ford Mustang. A 5/32" Allen wrench is needed to attach tools together. Allen wrench included.  ...

Great investment considering how easy it is to mar your switch, bezel or dash paint when trying to remove your ignition switch bezel with a hammer and screw driver. Black, basic handle tool removes and installs headlight switch and wiper switch bezels. When coupled with ignition bezel tool it removes and installs ignition switch bezels on any 1969 Mercury Cougar and Ford Mustang. A 5/32" Allen wrench is needed to attach tools together. Allen wrench included.  ...

Here is our reproduction SPI torque box for the driver side (left hand) of your Mercury Cougar coupe.

Here is our reproduction passenger side (right hand) SPI torque box for your Mercury Cougar coupe.

Reproduction passenger side (right hand) torque box outer section for Mercury Cougar and Ford Mustang coupe and convertible.Here's our little film to help you fortify your flexxy feline!

NOTE: We've been getting reports that these reproduction torsion bars lose their tension after a few weeks and will no longer lift the deck lid. These reproduction rods are installed horizontally in your trunk and attach to the trunk lid hinges.  Replaces Ford part numbers C7WY-6544890-A and C7WY-44891-A. The body section of the shop manuals describe how to adjust these bars, we offer a torsion bar adjusting tool for this purpose. *Note - Does not fit Mustang. Check out our...

Used driver side (right hand) spring from a door latch assembly fits many Ford and Mercury cars. This will fit all years 1967-70. 

Used passenger side (right hand) spring from a door latch assembly fits many Ford and Mercury cars. This will fit all years 1967-70. 

Factory NOS tow / trailer hitch assembly for your Mercury Cougar. This factory Ford piece is getting harder to come by and will require you to drill holes in your rear bumper for installation.Ford part # C7WA-19D520-A. This icon means that we're looking to buy this part!WCCC is a buyer of used and NOS hard to find 67-73 Mercury Cougar parts. Usually we give an in store credit of 50% of our web price for parts delivered in hand or by carrier to our Brooks, Oregon location. If you're not...

Used factory tow / trailer hitch assembly for your Mercury Cougar. This factory Ford piece is getting harder to come by and will require you to drill holes in your rear bumper for installation. Ford part # C7WA-19D520-A.Check out this video of our 2013 Open House event. See you next year!

The Wittek Company manufactured the tower clamps used on the Cougar from 1967 to 1973, the Mustang from 1964 1/2 to 1973, as well as many other Ford and Mercury cars during that period. In October or 1993, the company filed for bankruptcy. This has made the tower clamp unavailable to the classic car restorer. Our supplier was able to bid at the auction for enough of the original tooling and parts to make these clamps available again. Other companies have also reproduced these clamps, but...

Core FMX transmission for a 1970 Mercury Cougar or Ford Mustang. Tag number PHB-E1. Floor shift FMX Transmission. Core transmission only, No bell housing, dip stick, dip stick tube, or torque converter. This is a rebuildable core transmission, removed from a 1970 Mercury Cougar with H code 351-2V engine. Main case inspected for damage. Heavy item, in most cases it can ship UPS ground. Easier if picked up in person.

C-4 transmission 90 degree brass fitting for the rear oil cooler line. New reproduction with jamb nut and "O"-ring. Fits 1967-68 Mercury Cougar and 1965-73 Ford Mustang where applicable.

Fits all applications for both automatic and manual transmissions, big block and small block. Will also work with your Tremac / T-5. Replaces Ford part # C4DZ-6068-A.

Used original pan removed from a Western parts car, 14 bolt holes. This pan is not available new. These will have some likely have some minor scrapes. These were not painted originally, may have light rust that will clean up. The best available, won't be in stock often. See our Grade B pans for less than half the price. This icon means that we're looking to buy this part!WCCC is a buyer of used and NOS hard to find 67-73 Mercury Cougar parts. Usually we give an in store credit of 50% of our...

Used original pan removed from a Western parts car, 14 bolt holes. This pan is not available new. These will have some dents and or scrapes. These were not painted originally, may have light rust that will clean up. Consider them Grade B used.

Application; 390, 427, 351CJ, 428CJ, and 429CJ all with C6 transmission. 428CJ and 429CJ 4 speed transmissions. 1970 351C-4v with FMX.U-joint size 1330, overall length 8-3/4 inches.

New manufactured Tremec T-5z World Class Transmission. Same transmission as installed in Fox Body Mustangs. This is the common transmission for conversions that does not involve extensive modifications to 1967-73 Mercury Cougar or Ford Mustang. Small block Ford V-8 engines only, 289 / 302 / 351W and 351C. Brand new transmission, no core required. 1 year warranty, with recommended synthetic ATF. Flush and fill after first 500 miles, 30,000 miles there after. Bare transmission as shown, no...

New old stock emergency / parking brake pedal pad that features all stainless steel construction. Fits any 1969-73 Mercury Cougar and Ford Mustang.Replaces Ford part # C9ZZ-2A487-C.

REQUIRES sending your cores in advance.This is a restored aluminum 3 piece trim set from an early 1971 Mercury Cougar. Included are rear of hood trim Ford part # D1ZZ-16B918-A. Both fender trim pieces Replaces Ford part number D1WY-16C133-A and D1WY-16C132-A. Our restored aluminum trim is correctly bright dipped or anodized like originals.Technically these trim pieces were only used during the first 6 months of production on 1971 Mercury Cougar and all XR7 models including...

Good used bezel with appliqué still intact. Ford part number D1ZZ-13932-A.

Comes with trunk drop offs and complete tail panel. We would be happy to modify the way in which we remove this part to best fit your needs. Figure about $250 for shipping and crating via www.forwardair.com. Please call to order this one.

Comes with trunk drop offs and complete tail panel. We would be happy to modify the way in which we remove this part to best fit your needs. Figure about $250 for shipping and crating via www.forwardair.com. Please call to order this one.

These reproduction J clips mount to the underside of the deck lid and fit Standard and XR7 trunk lids.

After waiting several months, these reproduction 1967 - 1968 Mercury Cougar Deck Lock (Trunk Lock) covers are now finished! The reproduction chrome cover shown here sports a very rare original Ford, NOS XR7 decal. The NOS decal is different from our reproduction in three subtle areas. First the number "7" is a darker, richer color, second the decal fills the recessed area better and third the detail in the black area is a little different than our reproductions. Great for the person that loves...

There are several differences between this NOS decal and the good quality reproduction we offer. First off the red "7" is darker, second the "XR" is more brilliant, third is when you run your finger nail over the tiny raised ridges the reproduction makes a audible zip sound and the NOS does not, fourth is there is no adhesive backing on the NOS decal and there is on the reproduction, fifth is the reproduction is made of a much heavier aluminum stock than the NOS and lastly the NOS fits in the...

The later run XR7-G emblems we offer are really quite nice, but they are all just a tad smaller than originals. This is almost impossible to detect unless you have a reference point. The lock cover does in fact provide a reference point in that if you use a new emblem you will have a noticeable gap around the perimeter of the emblem. In years past, nobody really was concerned, but now that the XR7-G can be worth six figures in pristine condition, it matters. I put a used emblem behind this NOS...

The item pictured here is our reproduction XR7-G trunk deck lock cover with a NOS emblem. Big difference in fit compared to the current version of this emblem. Great for the XR7-G owner wanting to set his "G" apart from the rest of the pride... Click on images to enlarge. The emblem shown on the bottom is the NOS emblem sold through Ford back in the day and the top version is the one being made today by the OEM supplier.  Molds wear out, materials used differ, process changes over the...

Complete assembly minus the cylinder. Only the 68 was marked NOS, the 1967 XR7 just had the COUGAR decal. Click on images to enlarge. ...

Used Trunnion for 1967-68 Mercury Cougar and Ford Mustang with speed control. The Trunnion is the white plastic bone looking thing with a hole in it. Attaches the Link and Rod from Servo Bell Crank. Ford part number C7ZZ-9D766-A.

NOS oil pressure remote sending unit tube assembly. For all 1969-70 Mercury Cougar Eliminators with G code Boss 302 engines, and 1969-70 Boss 302 Mustangs with oil pressure gauge.The book says 'without tachometer'. Boss 302 forum suggests that it is for a remote oil pressure sending unit. According to a Boss 302 Engine Detailing article co-written by Marcus Anghel and Bob Perkins, this tube was needed for the larger bell shaped oil pressure sending unit. The larger bell shaped oil pressure...

Reproduction machined tube seat set, for ram cylinder and control valve on early 1967 Mercury Cougar and Ford Mustang with the 1/4" fittings. This set includes 6 seats, other kits only include 4 seats. Please note that starting in mid to late 1967, the control valves had 5/16" fittings all the way to 1970.

New Old Stock passenger side tail light assembly, Housing, lens, and bezel, all out of the box NOS. D1WY-13450, D1WB-13440-AA, D1WY-13489-A

Cancelling cam for the 67-69 Cougars and Mustangs with fixed columns. This cam is what returns your turn signal switch to the off position. This is not the same cam which comes inside tilt columns.

New Old Stock turn signal flasher for the 1969 Mercury Cougar and Ford Mustang GT-350/500. Turn signal flasher, not emergency flasher. Ford Part number C9WB-13350-A

Used turn signal flasher for the 1969 Mercury CougarFord Part number C9WB-13350-A

Very nice quality reproduction turn signal lever, though the detail on the end is slightly different from the originals. Most will not notice the difference. We do get good used units in stock occasionally. Replaces Ford part # C7ZZ-13305.*NOTE* Need help diagnosing a Cougar turn signal problem? Victor Yarberry is the world’s most knowledgeable expert on the subject. Vic has owned Cougars since the 1970's and is the designer of all of our solid state sequential systems. There is no question he...

This is a stock photo, the actual lever we have will most likely be worn and will not be as nice as the one pictured. Grade A speed or cruise control switch, for factory installed cruise control. Very rare option on a Cougar or Mustang, also fits Thunderbird and Lincoln. We won't always have this item in stock, and we may price them based on conditiion of the plastic chrome.The 1968 Electrical manual shows this part to be from Lincoln. C7VA-9D752-G This icon means that we're looking to buy...

Reproduction turn signal switch connector for your 67 Cougar or Mustang. Work with either tilt or fixed columns. This is the connector that attaches the turn signal switch to the main dashboard wiring harness.

This is a used 1967 tilt/away turn signal switch without cruise control.

One required per car, includes Phillips screw.*NOTE* Need help diagnosing a Cougar turn signal problem? Victor Yarberry is the world’s most knowledgeable expert on the subject. Vic has owned Cougars since the 1970's and is the designer of all of our solid state sequential systems. There is no question he cannot answer! Here is a link to a great source of information on the subject. ...

Sold individually. Has correct flattened area at top. Competition handling size, measures 7" from inner radius to end of threads. Thread size 7/16-20".  Does not include the OEM style nuts, those are an optional addon.  Replaces Ford Part #: C6OA-5705-C

Used early grade "A" under dash wire harnesses. There is an early and late version of this harness. This early version is for Cougars built prior to 1/3/1967, the late version is for Cats built after. In January of 1967 Mercury eliminated the stop lamp relay and integrated it into the sequential main turn signal relay, known as the K8-K9 relay. The early and late versions will not interchange with each other. All our harnesses will be inspected, tested, and ready to install when they...

Used grade "A" under dash wire harness is inspected, tested, and ready to install. These grade "A" harnesses will be rare uncut and unburnt beauty. This unit is for those of you who demand excellent original parts for your Cougar.*NOTE* If you send us your old used under dash harness, you will receive an in store credit of up to $100. Also keep in mind that we buy original under dash harnesses. We are interested in all under dash harnesses, but are primarily interested in the XR7 harness. ...

Used early grade "B" under dash wire harnesses. There are two versions of this harness, and early and a late version. This early version is for Cougars built prior to 1/3/1967, the late version is for Cats built after. In January of 1967 Mercury eliminated the stop lamp relay and integrated it into the sequential main turn signal relay, known as the K8-K9 relay. The early and late versions will not interchange with each other. All our harnesses will be inspected, professionally repaired,...

Used late grade "A" under dash wire harnesses. There are two versions of this harness, and early and a late version. This late version is for Cougars built after to 1/3/1967, the early version is for Cats built prior to. In January of 1967 Mercury eliminated the stop lamp relay and integrated it into the sequential main turn signal relay, known as the K8-K9 relay. The early and late versions will not interchange with each other. All our harnesses will be inspected, professionally repaired,...

Grade B 1969 under dash harness without air conditioning, with white plug. Used grade "B" under dash wire harness that very few 1969 XR7 and Eliminators used, only very late built cars. This harness may have one or two professional repairs. If you have a red printed circuit board, this is the harness you need. If you have a blue printed circuit board, you have the common harness from the early builds. This harness has the air conditioning wiring. Grade B will have several obvious professional...

Good clean used grade "A" under dash wire harness that was inspected, tested, and ready to install. This grade "A" harness will either be uncut or professionally repaired. Our wiring here in the Northwest tends to be among the best anywhere as we do not have high humidity to corrode connections and we do not have severe heat which tends to make wiring brittle in time.*NOTE* If you send us your old used under dash harness, you will receive an in store credit of up to $100. Also keep...