All Products

New water pump plate gasket for the Mercury Cougar or Ford Mustang.

New water pump gasket for 1967-69 Mercury Cougar and Ford Mustang with 289/302/351W. Single gasket for sealing water pump to water pump plate only.

New water pump gasket for 1971 Mercury Cougar and Ford Mustang with 429CJ engines. Water pump to water pump plate gasket only.

New water pump gasket for 1971 Mercury Cougar and Ford Mustang with 429 Cobra Jet engines. Single gasket, seals engine to water pump plate only. Also fits the 360 engine. Will also fit Torino, Comet and Cyclone.

Made from durable black plastic with correct ridged edges. Includes all four gaskets, enough for both the left and right exterior door handles. Replaces Ford part numbers C7ZZ-6522428/9.

Premium quality, exact fit plastic gasket set for both the driver and passenger side door handles. Also fits 66-71 Ford Fairlane and 70-71 Cyclone / Torino as well as several other Mercury, Ford Lincoln models. We are the exclusive retailers in the U.S. for this quality kit.

If you're going to rebuild your engine, this is the item you'll want to get. It's the complete gasket set for your 289 and 302 engines. (Will not fit early Boss engines). Included in this kit are the following: Head Gaskets Intake GasketsOil Pan Gasket Rear Main SealExhaust Manifold Gaskets Valve Cover Gaskets Water Pump GasketsTiming Cover Gaskets Timing Cover SealWater Neck GasketFuel Pump GasketDistributor Gasket ...

These 1969-70 Mercury Cougar chrome door handle gaskets are the closest fit to the original Ford gaskets on the market. 4 pieces as shown, enough for both door handles only, round lock gaskets sold separately.Will also work on 70-71 Cyclone and Torino.

New gaskets for installing your intake manifold. This is the Felpro branded gasket. Fits all 1970-73 Ford 351C engines with 4 barrel intake manifolds 1969-70 Mercury Cougar and Ford Mustang with 351C-4V engines. This gasket set includes a metal valley pan.Any doubts? 351 Windsor engines have 6 bolts holding the valve covers in place. 351 Cleveland engines have 8 bolts holding down the valve covers.*Note - Excludes 351W engines. *Note - Excludes 351C-2V Cleveland engines. ...

New gaskets for installing your intake manifold. This is the Felpro branded gasket. Fits 1967-70 big block Ford engines with size 390, 427, or 428 cubic inches, FE engine only. 1967-70 Mercury Cougar, Ford and Ford Mustang.

New gaskets for installing your 429 Cobra Jet intake manifold. This is the Felpro branded gasket. Fits 1970-71 Ford 429CJ engines. 1971 Mercury Cougar and Ford Mustang with J or C code 429CJ engines. Intake to cylinder head gaskets and intake end pieces, along with O ring for distributor. *Note - Excludes N code 429-4V or Thunderjet, passenger car engines.

New timing cover gasket set for 1967-70 Mercury Cougar and most all Fords with 289/302/351W engines. Gasket set includes; timing cover gasket, crankshaft seal, water pump gasket for early or late water pumps, and the oil pan corner gaskets under the timing cover.

New timing cover gasket set for 1970-73 Mercury Cougar and Ford Mustang with 351C engine. Includes gaskets as shown, timing cover, water pump to timing cover, fuel pump, crankshaft seal, and oil pan saddle.

New timing cover gasket set for the 1967-70 Mercury Cougar and most Fords with 390-2V, 390-4V, 427-4V, and the 428 Cobra Jets. Gasket set includes; crankshaft seal, timing cover gasket, two water pump gaskets, fuel pump gasket, and oil pan to timing cover gasket.

New timing cover gasket set for 1970-73 Mercury Cougar and Ford Mustang with 351C engine. Includes gaskets as shown, timing cover, water pump to timing cover, fuel pump, crankshaft seal, and oil pan saddle.

Cork valve cover gaskets for any big block Ford engine. Sold in pairs, works well with either stamped steel or cast aluminum valve covers.

Rubber valve cover gaskets for any FE 390 or 428 Ford engine. Sold in pairs, works well with either stamped steel or cast aluminum valve covers.

Gasket that creates the seal between the backup light lenses (also known as the reverse light lens) and the chrome housings on the 1969 and 1970 Mercury Cougar. Sold as a pair. Replaces Ford part # C9WY-15510.

Cork gasket for the disc brake splash shield. Fits all 1968-73 Mercury Cougar and Mustang and 1968-71 Ford mid size including Torino, Cyclone, Ranchero, Fairlane.Replaces Ford part number C8OZ-2B160-A.

Seals the lenses to the light body mounted in the front valance. Replaces Ford part # C9WY-13211. Sold as a pair. Also used on 1970 Mach I and 1969 - 1970 Shelby.

Seals the chrome marker light bezel to body. Seals the chrome marker light bezel to body. Their function is to keep water from entering the trunk around the rear lights. No gasket is needed on the front side markers. Replaces Ford part #D0ZZ-15447. These are designed for the Mustang and do not fit the Cougar without trimming. Sold as a pair.

These white foam gaskets fit between the sealed lens assembly and the chrome side marker light housing. They are sold as a pair. Replaces Ford part number D0ZZ-15209. *NOTE* To separate the sealed plastic lens assembly from the chrome bezels you will have to gently break away the edges of the factory "melted over" plastic stud. A drop or two of your favorite adhesive will reattach them but this is not crucial as the two threaded studs keep everything tied together once they are mounted back to...

Replaces Ford part #C9ZZ-6344228, sold as a pair. This is our economy version.

These are Concours quality with correct bevel and markings.. Sold as a pair.

Sold as a pair. These seal the lens to the taillight bucket / backing plate. Also used on the 1967 Shelby. Replaces Ford part # C7WY-13461.*NOTE* Need help diagnosing a Cougar turn signal problem? Victor Yarberry is the world’s most knowledgeable expert on the subject. Vic has owned Cougars since the 1970's and is the designer of all of our solid state sequential systems. There is no question he cannot answer! Here is a link to a great source of information on the subject. ...

These reproduction lens gaskets are a perfect fit and are sold as a pair for your Mercury Cougar.*NOTE* Need help diagnosing a Cougar turn signal problem? Victor Yarberry is the world’s most knowledgeable expert on the subject. Vic has owned Cougars since the 1970's and is the designer of all of our solid state sequential systems. There is no question he cannot answer! Here is a link to a great source of information on the subject. ...

Reproduction pair of taillight lens to housing gaskets for the 71 - 73 Mercury Cougar.

Cork valve cover gaskets for any 289/302/351W Ford engine. Sold in pairs, works well with either stamped steel or cast aluminum valve covers. Excludes Boss 302.

Rubber valve cover gaskets for any 289 302 351W Ford engine. Sold in pairs, works well with either stamped steel or cast aluminum valve covers. Excludes Boss 302.

New set of floor kick panel fresh air vent gaskets / seals for all 1969-1970 Mercury Cougars and Ford Mustangs. Die cut gasket copied from originals that have mounting holes in them. These foam gaskets are 1/4 inch thick. Casting number as seen on seal reads C9ZA-18B290-D. Replaces Ford part # C9ZZ-6501999.

Good used lens, will need polished but no cracks or deep scratches.Check out the video below on our new gauge tester: Check out our video on replacing the fuel system on a '68 Cougar! ...

Background paint is not sun damaged and is guaranteed to work good. If your gauge is cosmetically fine you may consider purchasing our grade B version and using your existing gauge face as they are easy to change out.Clean tested and working gauge that will be undamaged by the sun. Our instrumentation technician inspects, cleans, and zero's out the gauge. Check out the video below on our new gauge tester: ...

Clean tested and working gauge that will be undamaged by the sun. Our instrumentation technician inspects, cleans, and zero's out the gauge.Check out the video below on our new gauge tester: ...

Clean tested and working gauge that will be undamaged by the sun. Our instrumentation technician inspects, cleans, and zero's out the gauge. Check out the video below on our new gauge tester: ...

Gasoline or Fuel gauge assembly for a 1969 Mercury Standard Model. NOS new old stock. 1969 fuel gauges do not have any lettering on the warning lights. 1970 has the white lettering on "ALT" and "PARK" warning lights. Ford part number C9WY-9280-A. Check out the video below on our new gauge tester: ...

Gasoline or Fuel gauge assembly from a 1970 Mercury Standard Model. NOS new old stock. 1969 fuel gauges do not have any lettering on the warning lights. 1970 has the white lettering on "ALT" and "PARK" warning lights. Ford part number C9WY-9280-A. Check out the video below on our new gauge tester: ...

Gasoline or Fuel gauge assembly from a 1969 Mercury Standard Model. Bench tested and working fuel gauge. 1969 fuel gauges do not have any lettering on the warning lights. 1970 has the white lettering on "ALT" and "PARK" warning lights. Check out the video below on our new gauge tester: ...

Gasoline or Fuel gauge assembly from a 1970 Mercury Standard Model. Bench tested and working fuel gauge. 1970 has the white lettering on "ALT" and "PARK" warning lights as shown.Check out the video below on our new gauge tester: ...

Functions well but face is faded. It is easy to replace this face with your existing good face.Check out the video below on our new gauge tester: ...

Used Fuel Gauge for the XR7 1971 - 1973 Mercury CougarCheck out the video below on our new gauge tester:   ...

Used analog style fuel gauge for all 1969-70 Mercury Cougar XR7 and Mercury Cougar Eliminator. Bench tested and working gauge. Ford marking on the gauge C9WF-9306, Ford MPC number C9WY-9280-B.Check out the video below on our new gauge tester: ...

NOS gauge for any 1967-68 Standard Model Cougar. This combination gauge is a fuel and temperature gauge all in one with an oil and amp "idiot" lens on either side. Both gauges are guaranteed to work good. New Old Stock gauge or 'pointer dial' as the box says. NOS C7WY-9280-A. Check out the video below on our new gauge tester: ...

Comes with lens, background paint is not sun damaged. Guaranteed to work good. If your gauge is cosmetically fine you may consider purchasing our grade B version and using your existing gauge face as they are easy to change out.Check out the video below on our new gauge tester: ...

This gauge works fine but the paint has gone bad. You can use your existing good face to combine with this gauge and save money.Check out the video below on our new gauge tester: ...

Good used accurate gauge.Check out the video below on our new gauge tester:

Good used Grade A unit that has never had the odometer tampered with. Check out the video below on our new gauge tester: ...

Good used Grade B unit that has never had the odometer tampered with. Grade B's will have fading face paint and will need to be touched up. Check out the video below on our new gauge tester: ...

Rebuilt tachometer for your 1971 - 1973 XR7 Cougar. Check out the video below on our new gauge tester: ...