All Products

Short rubber valve stem and cap for Ford wheels or any steel wheel with a 0.453" hole. Snap in style, sticks up 2 inches from wheel surface. These will work with all of our aftermarket Ford wheels especially with trim rings. These have the Dill 627 caps. Same as the 1960's cars.

375897-S White plastic 5/16" washer for 1967-68 Mercury Cougar and Ford Mustang vent window pivot assembly. 2 per side, sold individually.

This part is installed on all XR7 fuel sending units and Cougars and Mustangs with the optional Convenience Control Package. Low quality off shore part that requires soldering to your fuel sending unit. This is a temperature sensing device that activates when the fuel level drops enough to expose the unit at which point the circuit is closed and the low fuel light comes on. Commonly referred to as a Thermister / Thermistor / Low Fuel Sending Unit.

Fits the 1967, 1968, 1969, 1970 and 1971 Mercury Cougar with the 390, 428, 428CJ, 428SCJ, 429CJ or 429SCJ. Replaces Ford Part #:C8OZ-7B535-AR

Replaces Ford Part # : C9ZZ-7591-A

1967 Mercury Cougar only. These are wearable items, and we list this item for those folks who really wish to go 'Concours trailered'. These interchange from side to side, two per 1967 Cougar. We save the very nicest ones from low mileage cars. Even though these are select parts, we recommend that the ball joints and bushings be replaced. *Note – Can only be used with 1967 Cougar lower control arms C7WY-3468-C (ITEM # 15393). Anghel Restorations can rebuild 1964-73 Ford suspension...

Rebuildable Core grade lower control arm for any 1968-69 Mercury Cougar and Ford Mustang. These are wearable items, and we list this item for those folks who really wish to go 'Concours trailered'. These interchange from side to side, two per car. Fits other 1968-69 Ford cars such as Torino and Cyclone. Even though these are select parts, we recommend that the ball joints and bushings be replaced.  Anghel Restorations can rebuild 1964-73 Ford suspension components to...

Rebuildable Core grade lower control arm for any 1970 Mercury Cougar and Ford Mustang. These are wearable items, and we list this item for those folks who really wish to go 'Concours trailered'. These interchange from side to side, two per car. One year only design, has a unique washer for the sway bar end links. Fits other 1970 Ford cars such as Torino and Cyclone. Even though these are select parts, we recommend that the ball joints and bushings be replaced. Limited to stock on...

Rebuildable Core grade lower control arm for any 1971-73 Mercury Cougar and Ford Mustang. These are wearable items, and we list this item for those folks who really wish to go 'Concours trailered'. These interchange from side to side, two per car. Fits other 1971-73 Ford cars such as Torino and Cyclone. No jacking tabs found on this version from Ford. Even though these are select parts, we recommend that the ball joints and bushings be replaced.  Anghel Restorations can...

Finally a quality reproduction lower control arm for the one year only 1967 lower control arm! Deigned to work with your existing articulated strut rod arms found only on the 1967 Mercury Cougar. *NOTE – Can only be used with 1967 Cougar lower control arms C7WY-3468-C (ITEM # 15393). Replaces Ford Part # C7WY-3078-A Having issues with wobbly or loose steering? Check out our video on sloppy steering below. ...

Reproduction reinforcement plate designed to weld onto the lower control arms. Sold individually, we are not sure that you would want to even buy one of these. They don't fit very well, and are not contoured to any lower control arm on the market. You will be bending these to fit, prior to welding. *Note - This is a non-returnable item. 

You can use 1968 up to 1973 lower control arms on a 1967 only if you change the strut rod to the 1968 - 1970 style. We have the strut rods available in both new and used form. Replaces Ford part #: C8OZ-3078-A. Sold individually, right is the same as left. *NOTE* The Cougar only, 1967 only, lower control arm is not available in reproduction form but you can rebuild the originals so do not throw away your cores as they may prove to be valuable one day. Mustang never used the articulated strut...

Concours restored pair of 1967 Mercury Cougar lower control arms. Unique to 1967 Mercury Cougars only, and must be used with original articulated strut rods. 1967 Mustang and 1968-73 strut rods will not work with these specific lower control arms for the 1967 Cougars, all models. Price is for two lower control arms. We did a limited run of these through anghelrestorations.com Replaces Ford part number C7WY-3078-B. Having issues with wobbly or loose steering? Check out our video on sloppy...

Sold individually, right is the same as left.  NOTE* You can use the 1968 - 1973 lower control arms on a 1967 ONLY if you change the strut rods to the 1968 - 1970 style. We have the strut rods available in both new and used form. Find them here. Replaces Ford part # C8OZ-3078-A. Having issues with wobbly or loose steering? Check out our video on sloppy steering below.  ...

This is the reproduction exclusive to the 1967 Mustang. Will also work on Fairlane, Comet, Futura and Falcon. C7OZ-3078.  NOTE: Will not work on the 1967 Cougar without the use of 1967 Mustang strut rods.  Get your control arms for 1968 - 1973 here.

Reproduction adjustment cam / bolt for the lower control arms of the Mercury Cougar or Ford Mustang. We also offer this used version as well. These units are sold individually.Ford part # C6OA-3B236-A.

Set of two polyurethane bushings that insert into the rear side of the lower control arm. This set contains two bushings that measure 1 9/16 across the leading inside edge, and 1 5/8 across the outer rim.Note: These larger diameter bushings were used on Ford service replacement lower control arms. Typically found on Ford supplied lower control arms without the welded on jacking tabs.

Set of two polyurethane bushings that insert into the rear side of the lower control arm. This set contains two bushings that measure 1 7/16 across the leading inside edge, and 1 5/8 across the outer rim. Typically these bushings fit Ford factory installed lower control arms with the welded on jacking tabs. Note: These smaller diameter bushings were used on factory installed control arms. Service replacement control arms utilized 1-9/16 inch bushings.

[No Description Provided]

This part mates to and is held down by Golde #100 413 681. The Golde part number for the smaller, lower elbow guide is 100 413 664

This part mates to and is held down by Golde #100 413 682. The Golde part number for the smaller, lower elbow guide is 100 413 663

Reproduction Lower Headlight Bucket Loom Clip for the 1967 - 1968 Mercury Cougar - 1967 - 1968 Ford Mustang 

Used chrome moulding that attaches horizontally to the bottom of the headlight bucket. Driver side for any 1971-73 Mercury Cougar. 1973 used a different casting number but the parts are exactly the same. A grade will have nice chrome, and maybe one minor blemish. We consider these 'show quality' rather than 'driver quality'. We do offer a B Grade version of this part, and always have them in stock.Replaces Ford part number D1WB-13B167-AB and D3WB-13B167-AA.

Used chrome moulding that attaches horizontally to the bottom of the headlight bucket. Driver side for any 1971-73 Mercury Cougar. 1973 used a different casting number but the parts are exactly the same. B grade will have some freckling in the chrome, and maybe a few pits and or other minor blemish. We consider these 'driver quality' rather than 'show quality'. We do offer an A Grade version of this part, but we seldom have them in stock.Replaces Ford part number D1WB-13B167-AB...

Restored driver (left hand) side lower headlight housing moulding for any 1971-1973 Mercury Cougar. We also have grade A and B used mouldings. Refundable core charge additional.Mercury casting # D1WB-13B167-AB or D3WB-13B167-AA.

Used chrome moulding that attaches horizontally to the bottom of the headlight bucket. Passenger side for any 1971-73 Mercury Cougar. 1973 used a different casting number but the parts are exactly the same. A grade will have nice chrome, and maybe one minor blemish. We consider these 'show quality' rather than 'driver quality'. We do offer a B Grade version of this part, and always have them in stock.Replaces Ford part number D1WB-13B166-AB and D3WB-13B166-AA.

Used chrome moulding that attaches horizontally to the bottom of the headlight bucket. Passenger side for any 1971-73 Mercury Cougar. 1973 used a different casting number but the parts are exactly the same. B grade will have some freckling in the chrome, and maybe a few pits and or other minor blemish. We consider these 'driver quality' rather than 'show quality'. We do offer an A Grade version of this part, but we seldom have them in stock.Replaces Ford part number D1WB-13B166-AB...

Restored passenger (right hand) side lower headlight housing moulding for any 1971-1973 Mercury Cougar. We also have grade A and B used mouldings. Refundable core charge additional.Mercury casting # D1WB-13B166-AB or D3WB-13B166-AA.

Used grade A lower center console pad for the 1967 Standard Automatic Transmission. We rarely have these in stock so the chances of getting the color you desire is slim. We have several Grade B's with cigarette burns, cracks and the like for substantially less money.

Used only in 1968 on non xr7 models and Mustang. Very hard to come by with no splits, burns or cracks. We rarely can supply the color you desire but please let us know your desired color and we will try. Grade A will not have UV ray damage and will look right at home in a low mile car. Satisfaction guaranteed.  

Used grade B lower center console pad for the 1967 Standard Automatic Transmission. We rarely have these in stock so the chances of getting the color you desire is slim. 

Used only in 1968 on non xr7 models and Mustang. Very hard to come by with no splits, burns or cracks. We often can supply the color you desire, please let us know your desired color and we will try. Grade B will need to be repainted and will not be as soft and straight as grade A. The simulated stitching embossed in the vinyl may show areas of slight separation.

This pad is in poor condition. You can actually modify a automatic pad to work with your manual transmission chrome bezel. *NOTE* If you have a clean example of this pad for sale we would like to hear from you!

Good lower pad with no cracks or burns. We have several of these in stock but cannot guarantee we can give you the color you select. Mention in the notes of your order what color you would like and plan on repainting this item even if we can provide your color as there is always some discoloration from age and use.

Good lower Grade B pad with no cracks or burns. We have several of these in stock but cannot guarantee we can give you the color you select. Plan on repainting this item even if we can provide your color as there is always some discoloration from age and use. Grade B will be pulling away from the base and will need glued.

Good used pad with no cuts or burns. Be aware that this is a sample picture, and you will need to specify the color you're looking for. NOTE: Almost always the vinyl will be de-laminating from the foam. This can be fixed with C clamps, wood strips for equalizing pressure and contact cement. This icon means that we're looking to buy this part!WCCC is a buyer of used and NOS hard to find 67-73 Mercury Cougar parts. Usually we give an in store credit of 50% of our web price for parts delivered in...

Found on the lower radiator core support. 2 clips total, attaches the wiring harness and the vacuum hoses for the headlight system.Replaces Ford part number 377359-S.

Found on the lower radiator core support. 2 clips total, attaches the wiring harness and the vacuum hoses for the headlight system.Replaces Ford part number 377359-S.

Sold as a pair, these are one year only brackets used with the over-sized 390 radiator. We also have the 1967 unique rubber insulators listed as well. These brackets have a 2" opening. Check out our video on Radiator and Fan upgrades below: ...

Used bracket for installing the vertical seat cushion on a 1971-73 convertible Mercury Cougar or Ford Mustang. Two required per car, sold individually. Not sure of the Ford number, this part went obsolete many years ago. Please take multiple measurements of the location of your old brackets prior to removal. 

Used lower steering column shaft for 70 - 73 Cougars and Mustangs with a fixed column. Identified by length, and the round style lower flange. 1968-69 lower flange is slightly smaller with flat sides. Overall length is 16-3/8 inches.

Used lower steering column shaft for 71 - 72 Cougars and Mustangs with a tilt column. *NOTE* For tilt column service, you can contact Tony Augustine at 6t8cougarguy@gmail.com. Tony is a trusted colleague of WCCC and we've sent many customers his way since our column specialist retired last year.

Reproduction BLACK lug nut fits all Legendary Series wheels. 14mm x 1.5 threadSold individually. 

Chrome tapered acorn lug nut for use with the new Legendary wheels. This 13/16" nut really only fits the Magstar style - the others have tighter clearances and you'll want to use the 3/4" nuts made for these wheels. Sold individually here, or in a complete set with valve stems. Replaces Ford Part #: C9ZZ-1012-B.Check out our video on Legendary Wheels below: ...

Correct 3/4" tapered chrome acorn lug nut for the new Legendary Wheels. These are what we recommend you use with these wheels, since the clearances are too tight for regular 13/16" lug nuts. Sold individually here, or as a complete set with valve stems.Check out our video on Legendary Wheels below: ...

Reproduction lug nut for the Legendary GT7 Series wheel. Sold Individually. You can find the complete lug nut installation kit here.Check out our video on Legendary Wheels below: ...

Chrome acorn lug nut for most any Ford steel wheel including styled steel, Magnum 500,  new or reproductions.Replaces Ford Part #: C9ZZ-1012-B.

This is a standard reproduction lug nut that Fits the styled steel wheels and is the same as the original. 1/2"-20. Need to replace missing, cross threaded, or otherwise damaged lug nuts? Do you have after-market chrome wheels with the flat washers and closed round head lugs? Fits the following models with stamped steel wheels: 1967 Mercury Cougar 1968 Mercury Cougar 1969 Mercury Cougar 1970 Mercury Cougar 1971 Mercury Cougar 1972 Mercury Cougar 1973 Mercury...