All Products

Reproduction front diaphragm for your 67 - 69 Cougar or Mustang Midland power brake booster.Diameter 7 1/4"

[No Description Provided]

Driver side rear brake cable bracket. This is a part cut from a car, some trimming and or spot welds will need to be removed prior to installation. Fits all 1970-71 Mercury Cougar and Ford Mustang.

Passenger side rear brake cable bracket. This is a part cut from a car, some trimming and or spot welds will need to be removed prior to installation. Fits all 1967-69 Mercury Cougar and Ford Mustang.

Passenger side rear brake cable bracket. This is a part cut from a car, some trimming and or spot welds will need to be removed prior to installation. Fits all 1970-71 Mercury Cougar and Ford Mustang.

Reproduction driver side rear extended floor pan for the 67 - 68 Cougar or Mustang. NOTE: This quality pan can be modified to fit a Cougar, but is designed for the Mustang. You can see in the picture above that when being installed on the Cougar, there will be a sizeable gap along the wheel well. We also carry used patches to fill those gaps ...

Reproduction passenger side rear extended floor pan for the 67 - 68 Cougar or Mustang. NOTE: This quality pan can be modified to fit a Cougar, but is designed for the Mustang. You can see in the picture above that when being installed on the Cougar, there will be a sizeable gap along the wheel well. We also carry used patches to fill those gaps. ...

Good for all 71-73 Cougars and Mustangs. This extension extends from the driver side rear fender apron to the top of the cowl.This rear fender apron extension is a great choice for your damaged, rusted or missing panel. Made from stamped steel, just like the original. The extension fits in place between the passenger side rear fender apron and the top of the cowl. It provides for a sturdy, stable mounting area for the far rear top fender bolt and the rear hood hinge bolts. ...

Good for all 71-73 Cougars and Mustangs. This extension extends from the passenger side rear fender apron to the top of the cowl.This rear fender apron extension is a great choice for your damaged, rusted or missing panel. Made from stamped steel, just like the original. The extension fits in place between the passenger side rear fender apron and the top of the cowl. It provides for a sturdy, stable mounting area for the far rear top fender bolt and the rear hood hinge bolts. ...

Fits Standard and XR7 Sold as a Kit as Pictured.

Driver side, rear frame rail, from a 1969 and 1970 Mercury Cougar convertible. Full length, we cut so that there is some remaining metal on the edges. Ford part number C9WY-7610125-A.* Note - this item has dimensions in excess of 75 inches, and will ship as "Over- Size", unless you pick up in person. ** Note - Hardtop is different.

Driver side, rear frame rail, from a 1969 and 1970 Mercury Cougar hard top. Full length, we cut so that there is some remaining metal on the edges. Ford part number C9WY-6510125-A.* Note - this item has dimensions in excess of 75 inches, and will ship as "Over- Size", unless you pick up in person. ** Note - Convertible is different.

Driver side, rear frame rail, from a 1971, 1972, and 1973 Mercury Cougar hard top. The Ford MPC shows a couple of different numbers and exceptions for this item. It may be the presence or absence of the nutserts for the rear sway bar option. If the sway bar nutserts are needed, please contact WCCC for availability. Full length, we cut so that there is some remaining metal on the edges. Ford part number D2WY-6510125-A.* Note - this item has dimensions in excess of 75 inches, and will ship as...

Driver side, rear frame rail, from a 1967 Mercury Cougar. Full length, we cut so that there is some remaining metal on the edges. 1967 is unique, they use longer front leaf spring bolts. The leaf spring bolts on a 1967 Mercury Cougar go all the way through the rear frame rails. Ford part number C7WY-6510125-A.* Note - this item has dimensions in excess of 75 inches, and will ship as "Over- Size", unless you pick up in person. 

Driver side, rear frame rail, from a 1968 Mercury Cougar. Full length, we cut so that there is some remaining metal on the edges. 1968 was the first year where the inside part of the frame rail has a large access hole for inserting the leaf spring bolt. The large access hole normally should have a plastic body plug to prevent debris from entering the frame rail. Ford part number C8WY-6510125-A.* Note - this item has dimensions in excess of 75 inches, and will ship as "Over- Size",...

Passenger side, rear frame rail, from a 1969 and 1970 Mercury Cougar convertible. Full length, we cut so that there is some remaining metal on the edges. Ford part number C9WY-7610124-A.* Note - this item has dimensions in excess of 75 inches, and will ship as "Over- Size", unless you pick up in person. ** Note - Hardtop is different.

Passenger side, rear frame rail, from a 1969 and 1970 Mercury Cougar hard top. Full length, we cut so that there is some remaining metal on the edges. Ford part number C9WY-6510124-A.* Note - this item has dimensions in excess of 75 inches, and will ship as "Over- Size", unless you pick up in person. ** Note - Convertible is different.

Passenger side, rear frame rail, from a 1971, 1972, and 1973 Mercury Cougar hard top. The Ford MPC shows a couple of different numbers and exceptions for this item. It may be the presence or absence of the nutserts for the rear sway bar option. If the sway bar nutserts are needed, please contact WCCC for availability. Full length, we cut so that there is some remaining metal on the edges. Ford part number D2WY-6510124-A.* Note - this item has dimensions in excess of 75 inches, and will...

Passenger side, rear frame rail, from a 1967 Mercury Cougar. Full length, we cut so that there is some remaining metal on the edges. 1967 is unique, they use longer front leaf spring bolts. The leaf spring bolts on a 1967 Mercury Cougar go all the way through the rear frame rails. Ford part number C7WY-6510124-A.* Note - this item has dimensions in excess of 75 inches, and will ship as "Over- Size", unless you pick up in person. 

Passenger side, rear frame rail, from a 1968 Mercury Cougar. Full length, we cut so that there is some remaining metal on the edges. 1968 was the first year where the inside part of the frame rail has a large access hole for inserting the leaf spring bolt. The large access hole normally should have a plastic body plug to prevent debris from entering the frame rail. Ford part number C8WY-6510124-A.* Note - this item has dimensions in excess of 75 inches, and will ship as "Over- Size",...

Fits any model that used the banded Midland-Ross booster. This Bakelite hub can be seen when you remove the dust boot. It is a very brittle fragile part that gets broken when you drop the booster, attempt to bleed the brakes with the engine running or install the wrong brake pedal.

Reproduction driver side rear inner apron for both the Mercury Cougar and Ford Mustang.

Stamped steel driver side (left hand) rear inner apron for the Mercury Cougar or Ford Mustang.Here's a little film to help you fortify your flexxy feline!

Reproduction stamped steel driver side (left hand) rear inner apron for Mercury Cougar or Ford Mustang.

Reproduction passenger side rear apron for Mercury Cougar and Ford Mustang.Here's a little film to help you fortify your flexxy feline!

Reproduction stamped steel passenger side (right hand) rear inner apron for the Mercury Cougar or Ford Mustang.Here's a little film to help fortify your flexxy feline!

Reproduction passenger side (right hand) rear inner apron for Mercury Cougar and Ford Mustang.

Very limited choice of colors in grade "A", so please leave us a note in the comments section when ordering online and we will try to accommodate. Basket weave inserts in grade "A" condition will have all of the Mylar trim in place with no peeling or discoloring.

Grade B will have failing mylar chrome trim. Please list in the comments section of your online order what color you prefer and we will attempt to get you the desired color, limited to stock on hand.

Grade B will have failing mylar chrome trim. Please list in the comments section of your online order what color you prefer and we will attempt to get you the desired color, limited to stock on hand.

Very limited choice of colors in grade "A", so please leave us a note in the comments section when ordering online and we will try to accommodate. Basket weave inserts in grade "A" condition will have all of the Mylar trim in place with no peeling or discoloring.

Grade B will have failing mylar chrome trim. Please list in the comments section of your online order what color you prefer and we will attempt to get you the desired color, limited to stock on hand.

Very limited choice of colors in grade "A", so please leave us a note in the comments section when ordering online and we will try to accommodate. Basket weave inserts in grade "A" condition will have all of the Mylar trim in place with no peeling or discoloring.

Very limited choice of colors in grade "A", so please leave us a note in the comments section when ordering online and we will try to accommodate. Basket weave inserts in grade "A" condition will have all of the Mylar trim in place with no peeling or discoloring.

Grade B will have failing mylar chrome trim. Please list in the comments section of your online order what color you prefer and we will attempt to get you the desired color, limited to stock on hand.

Rare to find a diecast ash tray lid with no pitting. This design was used on several convertibles 1964 - 1970 starting the Ford Galaxie. The casting number on the back reads C4AB-7630706.

 Like most examples you will see out there this grade B sliding lid will have minor pitting. This design was used on several convertibles 1964 - 1970 starting the Ford Galaxie.  The casting number on the back reads C4AB-7630706.

Ashtray sliders for the rear interior quarter panels in the 1969 or 1970 Mercury Cougar or Ford Mustang.  Slide handle is ribbed black plastic and has ribbing for strength on the slide cover on this reproduction.Not exactly concours, but a close copy. See the comparison photo. Replaces Ford part # C1AB-7630714-A.

Used Convertible Driver Rear Interior Panel Grade "A" for the 1969 and 170 Mercury Cougar

Used Convertible Driver Rear Interior Panel Grade "B" for the 1969 and 1970 Mercury Cougar

This panel was used on all convertible models without retractable seat belts. Please contact us for choice of color, power or manual windows and with or without seat belt re-tractors. It will not show serious UV damage with the "chalky look" and will have no extra holes drilled.

Rarely will you find perfect vinyl on a rear convertible panel. Our grade "A" rating refers to the condition of the plastic backing, not the vinyl.

Whenever possible we include broken off tabs on our grade B rear panels. Keep in mind the panel pictured will not be the panel you receive but rather a like item.

This panel was used in most of 1972 and all of the 1973 model year and is used in conjunction with cars equipped with rear seat seat belt re-tractors. It will not show serious UV damage with the "chalky look" and will have no extra holes drilled. These are very hard to obtain so we rarely have more than a couple on hand, please email us for colors on hand.

This panel was used in most of 1972 and all of the 1973 model year and is used in conjunction with cars equipped with rear seat seat belt re-tractors. It will not show serious UV damage with the "chalky look" and will have no extra holes drilled. These are very hard to obtain so we rarely have more than a couple on hand, please email us for colors on hand.

Used décor rear interior panel in aqua for the passenger side (right hand) of the Mercury Cougar coupe. The décor interior is one level above the base standard interior. Interior code for base standard interiors starts with 1, décor interior codes can start with 3, 5, or E, followed by another letter denoting color. *NOTE* Arm rests sold separately. Specify if your Cat requires power window cutouts in the comments section.

Used 1969 décor rear interior panel in black for the driver side (left hand) of the Mercury Cougar coupe. The décor interior is one level above the base standard interior. Interior code for base standard interiors starts with 1, décor interior codes can start with 3, 5, or E, followed by another letter denoting color. Do know that the panel you receive will not be the one pictured. Price listed is for a middle of the road panel that will have defects. Call prior to ordering for pictures and...

Used 1969 décor rear interior panel in black for the passenger side (right hand) of the Mercury Cougar coupe. The décor interior is one level above the base standard interior. Interior code for base standard interiors starts with 1, décor interior codes can start with 3, 5, or E, followed by another letter denoting color. Do know that the panel you receive will not be the one pictured. Price listed is for a middle of the road panel that will have defects. Call prior to ordering for pictures...