All Products

C8ZZ-7400-C 4 Speed manual transmission shift control assembly for any 1968 Mercury Cougar and Ford Mustang after 1-2-1968. Big block 390 and 428CJ engines only. Check out our video on rebuilding your shifter below: ...

Adapter plate for mounting the 3 or 4 speed shifter control assembly to the Top Loader transmission.Ford part # C7ZZ-7E046-A. Check out our video on rebuilding your shifter below: ...

Adapter plate for mounting the 3 or 4 speed shifter control assembly to the Top Loader transmission.Ford part # C9ZZ-7E046-A. Check out our video on rebuilding your shifter below: ...

Adapter plate for mounting the 4 speed shifter control assembly to the Top Loader transmission.Ford part # D1ZZ-7E046-B. Check out our video on rebuilding your shifter below: ...

Ford casting number D0ZA-7E046-E. Adapter plate for mounting the factory installed Hurst 4 speed shifter control assembly to the Top Loader transmission. Mercury Cougar Ford Mustang 351 and Boss 302 engines. Ford master part number D0ZZ-7E046-B.

D0ZA-7E046-D Adapter plate for mounting the Hurst 4 speed shifter control assembly to the Top Loader transmission on a 1970 big block 428 cobra jet Cougar or Mustang. Ford master part number D0ZZ-7E046-A. Check out our video on rebuilding your shifter below: ...

D1ZZ-7E046-A Adapter plate for mounting the Hurst 4 speed shifter control assembly to the Top Loader transmission.

Adjustable rod that connects the floor shifter to the C-6 automatic transmissions. C6 transmissions only, found optionally on any 1971 Cougar. Code "U" on your door data plate tag. C-6 automatic transmission. Shift rod approximately 18 inches long. Rod originally had a "Red" paint daub for identification purposes on the Dearborn assembly line. 1971 only. Rod marked D1ZA-7340-BA.

Transmission shifter rod for all 1972-73 Mercury Cougar and Ford Mustang with C6 automatic transmissions. Adjustable rod that connects the floor shifter to the C-6 automatic transmissions. C6 transmissions only, found optionally on any 1972-73 Cougar. Code "U" on your door data plate tag. C-6 automatic transmission. 1972 and 1973 only. Rod marked D2ZA-7340-AA.

C5ZZ-7210-D "U" shaped bracket that attaches the 3 speed shift lever to the shifter control assembly. For use on all 1967 Mercury Cougar and Ford Mustangs with the 3 or 4 speed shift lever, and 1968 shift levers through 1-2-1968. Bottom bracket only, called a Trunion (see illustration). Measurement of hole spacing is 1-13/16 inches on center. *Note - Must be used with 3 speed shift lever C5ZZ-7210-C, or 4 speed shift lever C5ZZ-7210-M. Check out our video on rebuilding your shifter below: ...

C8ZZ-7210-D "U" shaped bracket that attaches the 3 speed shift lever to the shifter control assembly. For use on all 1968 Mercury Cougar and Ford Mustangs after 1-2-1968, with the 3 & 4 speed shift levers. Bottom bracket only, called a Trunion (see illustration). Measurement of hole spacing is 2 inches on center. *Note - Must be used with 3 speed shift lever C8ZZ-7210-C, or 4 speed shift lever C8ZZ-7210-B. Check out our video on rebuilding your shifter below: ...

C9OZ-7210-B "U" shaped bracket that attaches the 3 speed shift lever to the shifter control assembly. For use on all 1969 Mercury Cougar and Ford Mustangs with the 3 speed shift lever. Bottom bracket only, called a Trunion (see illustration). *Note - Must be used with 3 speed shift lever C9ZZ-7210-A. Check out our video on rebuilding your shifter below: ...

C9AZ-7210-J "U" shaped bracket that attaches the 4 speed shift lever to the shifter control assembly. For use on all 1969 Mercury Cougar and Ford Mustangs with the 4 speed shift lever. Bottom bracket only, called a Trunion (see illustration). *Note - Must be used with 4 speed shift lever C9ZZ-7210-B.

This tower is identical to every other 1967-70 tower in every way except the reinforcement plate.The reinforced shock towers came out in late March 1968 and were used on all big block Cougars and Mustangs. 390-2V / 390-4V / 427 / 428CJ. No specific part number exists for this structural front suspension section with or without wrap around bracing. This example was actually taken from a very early 1969 San Jose built Cougar and is identical to the late 68 Big Block Tower. The only reason you...

This tower is identical to every other 1967-70 tower in every way except the reinforcement plate. In late 1968 390-427-428 Mercury Cougar and Ford Mustang came with this reinforced tower due to a problem they were having with structural cracking. No specific part number for this structural front suspension section with or without wrap around bracing. This example was actually taken from a very early 1969 San Jose built Cougar and is identical to the late 68 Big Block Tower. The only reason you...

Reproduction shock tower and apron assembly  for your Cat or Pony.Here's a little film to help you fortify your flexxy feline!

Pair of reproduction firewall to shock tower braces for the Mercury Cougar. These are good quality reproductions that are already painted black so the only thing you need to do is bolt them on.Replaces Ford part #'s C7ZZ-16A053 driver side (left hand), C7ZZ-16A052 passenger side (right hand).

Passenger side (right hand) front seat floor pan. This pan is cut from the full floor pans in order to save on shipping costs when a customer does not need the entire length pan. Cutting from the Dynacorn full length pans means this will be a quality cut, when compared to other pans on the market.   1967-68 style ribbing, works in 1969-70 and can be modified to fit 1971-73. *NOTE* This floor pan has the outside lip bent down which is proper for coupes, convertibles were bent up....

If you want to install factory shoulder belts on your 1967 Cougar or Mustang, you need to install these shoulder belt brackets. It's a threaded block inserted into the clip that holds it in place. 67 Cougars and Mustangs didn't come with shoulder belts, but the raised area where these brackets attach is still present. Simply clip the bracket in place. Now you've got what you need to bolt that shoulder belt in place. Keep in mind that you need to have the correct lap belt configuration to be...

Attaches to the console shifter bezel on any 1967-68 Mercury Cougar or Ford Mustang. We occasionally have these available when we get broken console bezels. This surround or "U" plate was originally attached with heat to pin connectors. To reattach we suggest using glue. This U part attaches to the bottom of the console shifter bezel and shrouds the light. Check out our video on rebuilding your shifter below: ...

Good used driver Quality, no cracks in lens and not pitted but will show "patina". Ford part #C8GY-13380

This icon means that we're looking to buy this part!WCCC is a buyer of used and NOS hard to find 67-73 Mercury Cougar parts. Usually we give an in store credit of 50% of our web price for parts delivered in hand or by carrier to our Brooks, Oregon location. If you're not interested in store credit, just shoot us an email and we will let you know if it's is something we can pay cash for. We do not send cash for parts in advance but we often can compensate you within hours of receiving the...

Here is a real treat! New in the Ford box driver side (left hand) mirror, very hard to come by these days. *NOTE* XR7 and GT Cougars ordered with a "special paint" color got this chrome mirror in place of the color keyed sport mirror that came standard with those option packages. A small credit was given for the trade down and was shown on the invoice. Do you have questions about installing a passenger side mirror or using Riv-Nuts? Have more questions about installing a passenger side mirror...

Used chrome mirror for the passenger side on any 1971-73 Mercury Cougar. Not factory installed, these were dealer installed, or available as a companion mirror for the chrome driver side mirror found on many 1971-73 Standard model Cougars. Consider these used mirrors as B grade, the chrome plating will be driver quality. Replaces Ford part number C9AJ-17682-A and D2AB-17713-AA.

Very nice pit free mirror worthy of a low mile original car.*NOTE* Mustang uses a different mirror and will not fit contrary to what you may have seen advertised elsewhere!Hole spacing: 4 3/8"Ford part # C7WY-17696-ADo you have riv-nut questions? Here are riv-nut answers! ...

This driver quality manual adjust driver side mirror shows wear and the chrome will not polish out.*NOTE* Mustang uses a different mirror and will not fit contrary to what you may have seen advertised elsewhere!Hole spacing: 4 3/8"Ford part # C7WY-17696-ADo you have riv-nut questions? Here are riv-nut answers!Cougar Applications:1967 Mercury Cougar1968 Mercury Cougar ...

NOS unpackaged driver side manual adjust mirror. Shows some shelf wear, a small scuff on the base and a smudge on the glass. Don't forget to select a mounting gasket and mounting kit if needed. Casting number reads C7WB-17743-B Ford part # C7WY-17696-A. *NOTE* Mustang uses a different mirror and will not fit contrary to what you may have seen advertised elsewhere! Hole spacing: 4 3/8" Do you have riv-nut questions? Here are riv-nut answers! ...

Grade A mirror will have no cracks, deep scratches or pits. Will look right at home on a low mile garage kept car.

Working grade "A" driver side (left hand) remote mirror with nice chrome. This would look right at home on a low mile unrestored car. Hole spacing: 4 3/8"Do you have riv-nut questions? Here are riv-nut answers!

Good working grade "A" driver side (left hand) mirror that will look as good as the one shown here. Since the wand is recessed into the door panel on the 1969 Cougar, the wand is not prone to breaking off like the 1970 version which protrudes straight out. NOTE - Cable length should be 18" from the base of the mirror to the inner end of the remote wand assembly. In order to keep the cable from hitting the window, there's usually a clip to hold it away from the glass. This clip is hard to come...

The wand will be intact on this grade "A" driver side (left hand) remote mirror and the chrome will be free of pits. Notice the 1970 mirrors differ from 1969 in that the wand exits the door panel at a 90 degree angle. Rarely do we have a mirror this nice but you can get in line for the next one that becomes available by selecting the "notify me option" and we will email you when one comes in. There is no passenger side mate to this mirror or any chrome mirror found on a 69-70 Cougar.Ford part...

This used grade "A" remote mirror has chrome that looks great and the adjustment wand is unbroken and working. Used on the drivers side of standard Cougars, no passenger side mate was ever offered with this mirror. Two different versions of this mirror are found on 1971-73 Mecury Cougars, either casting number D1WB-17743-AA or C9AB-17743-A will be supplied.Replaces Ford part numbers D1WB-17743-AA and C9AB-17743-A.Do you have riv-nut questions? Here are riv-nut answers! ...

Good working grade "B" driver side (left hand) mirror that most likely will not have as good of chrome as the one shown here. Since the wand is recessed into the door panel on the 1969 Cougar the wand is not prone to breaking off like the 1970 version which protrudes straight out. NOTE - Cable length should be 18" from the base of the mirror to the inner end of the remote wand assembly. In order to keep the cable from hitting the window, there's usually a clip to hold it away from the...

Unfortunately the wand is broken off from this grade "B" driver side (left hand) mirror. It will require drilling out the old one and epoxy gluing in another or removing the complete controller from another 1970's like mirror. Chrome is dull and often will have light pitting. Ford part # D0WY-17696-A. *NOTE* If you have a blank area where your color code is supposed to be typed on your 1970 door data decal, then you have a "special order" paint color. Because sport mirrors came pre-painted...

This used grade "B" remote mirror has chrome that looks shabby, adjustment wand is unbroken and working. Used on the drivers side of standard Cougars, no passenger side mate was ever offered with this mirror. Two different versions of this mirror are found on 1971-73 Mecury Cougars, either casting number D1WB-17743-AA or C9AB-17743-A will be supplied.Replaces Ford part numbers D1WB-17743-AA and C9AB-17743-A.Do you have riv-nut questions? Here are riv-nut answers! ...

This NOS remote mirror came to use without a Autolite or Motorcraft box. Current offering while new and never installed does have a small manufacturers defect in the casting as shown. Found on the drivers side of standard model Cougars, no passenger side mate was ever offered with this mirror. Two different versions of this mirror are found on 1971-73 Mecury Cougars, either casting number D1WB-17743-AA or C9AB-17743-A. This mirror has the Ford casting number D1WB-17743-AA. Do...

Quality reproduction mirror for your 1967 Cougar. Whereas it is not easily detected at first glance, the head of the mirror does have a slightly different contour than original. The base is spot on perfect and the controller, cable assembly are all excellent quality. The wand (sold separately) is correct for 1967 (fluted, baseball bat shaped wand) as opposed to the 1968 version with a ball on the end (which we also sell). Plastic mounting pad and hardware included. *NOTE* Mustang mirrors...

Quality reproduction mirror for your 1968 Cougar. Whereas it is not easily detected at first glance, the head of the mirror does have a slightly different contour than original. The base is spot on perfect, the controller and cable assembly are all excellent quality. The wand that is correct for 1968 is the ball type (as shown), the 1967 used a fluted, baseball bat shaped wand. Plastic mounting pad and hardware included.*NOTE* Mustang mirrors will not work on a Cougar no matter what "they"...

Used driver side (left hand) grade "A" manual side mirror for the Mercury Cougar. This is your plain Jane manual adjust mirror for the driver side of your 1969 or 1970. Uses same base mounting pad as all 1969-70 Cougar driver side mirrors.Ford part # C9WY-17696-B. Do you have riv-nut questions? Here are riv-nut answers! This icon means that we're looking to buy this part!WCCC is a buyer of used and NOS hard to find 67-73 Mercury Cougar parts. Usually we give an in store credit of 50% of our...

Used driver side (left hand) grade "B" manual side mirror for the Mercury Cougar. This is your plain Jane manual adjust mirror for the driver side of your 1969 or 1970. Worn finish, scratches, often will have light pitting. Uses same base mounting pad as all 1969-70 Cougar driver side mirrors.Ford part # C9WY-17696-B. Do you have riv-nut questions? Here are riv-nut answers! ...

Used manually adjustable grade "B" side view mirror for the Mercury Cougar Standard or Ford Galaxie. This ambidextrous mirror can be installed on either the passenger or driver side door. This good used mirror will have good glass and will have some pitting in the chrome as shown. Also used on various 1967-73 full sized Ford and Mercury cars. Replaces Ford part # C7AZ-17696.Dimensions: Base Hole Spacing: 5-7/8"Base Length: 6-5/8"Overall Height: 5-1/8"Mirror Width: 5-1/8"Mirror Height: 3-5/16"...

Fine scratches but great for the guy who wants original. The Reproduction does not have the II-DMI-6 lettering at the bottom like this original. You will have to carefully peel (roll back) the aluminum backing that is glued in place before gluing it in your mirror. If you use needle nose pliers and take your time it usually works fine. Note that the pictures of our 67-68 mirrors and lens can be deceiving. This is a tapered mirror, the narrow end faces upward on a Cougar, it is reversed when...

Rare find. The difference between this and a 69 is the 90 degree angled portion that mounts to your door panel. This is correct for a XR7 or Eliminator. The 1970 sport mirror did not use a chromed base at any time. Do you have questions about installing a passenger side mirror or using Riv-Nuts? Have more questions about installing a passenger side mirror? Got a mirror lens that flops around in your Sport Mirror every time you hit a tiny bump in the road? WCCC to the rescue! ...

This plastic fastener is used to keep your mirror cable from interfering with the movement of your door glass. It is located at the front of the door near the top.

Ford Casting number as seen on the bottom side is D0OB-17713-AW. Many people misinterpret it as D00B-17713-AW, D00B-17713-AW or DO0B-17713-AW. Perfect base with no cracks or bends. The Pastel Blue base is from a 1970 and the Red base from a 1971. Even when placed side by side it is hard to tell the difference. Do you have questions about installing a passenger side mirror or using Riv-Nuts? Have more questions about installing a passenger side mirror or using Riv-Nuts? Got a mirror lens that...

Complete Service part mirror assembly for any Cougar with the sport / bullet racing style mirror. Casting number as seen on base is D1WB-17743-B.Ford part number D1WY-17682-A

Ford Casting number as seen on the bottom side is D1OB-17713-AWA. Many people misinterpret it as D10B-17713-AWA, DI0B-17713-AW or Dl0B-17713-AWA. Perfect base with no cracks or bends. Visually it is impossible to tell this part from 1970 with a D0OB-17713-AW casting number on the bottom. The Pastel Blue base is from a 1970 and the Red base from a 1971. Even when placed side by side it is hard to tell the difference. Do you have questions about installing a passenger side mirror or using...

NOS passenger side (right hand) sport mirror that is correct for the Mercury Cougar. This will also work on 1969-70 Cougar, but base height is just a little bit taller. Replaces Ford part # D1OB-17713 Do you have questions about installing a passenger side mirror or using Riv-Nuts? Have more questions about installing a passenger side mirror or using Riv-Nuts? Got a mirror lens that flops around in your Sport Mirror every time you hit a tiny bump in the road? WCCC to the rescue! ...